Kathy
abb89cc757
B2019-048: fixed crashes on approval dialog
2019-04-01 13:22:19 +00:00
Kathy
5d6bfe1c45
C2019-009: Fix type of message box when doing Approve Procedure
...
C2019-014: Make Print Dialog consistent with Version Properties Dialog for duplex printing
2019-03-28 15:47:09 +00:00
Kathy
a9ad0ed12a
B2019-029: When a new annotation is created, unless you press save, it isn’t saved. The first fix caused a dialog to come up repeatedly for when save is selected. There is no longer a dialog and this was fixed with this update
2019-03-28 14:35:21 +00:00
Kathy
8570148961
2019-03-25 14:12:11 +00:00
Kathy
17ae2c3df7
B2019-041: The merging of pdfs crashes when there is a bad (corrupt) procedure pdf to merge
2019-03-22 13:15:43 +00:00
Kathy
915763948d
F2019-023: various format changes
2019-03-20 14:01:56 +00:00
Kathy
60d7ba4e88
B2019-029: When a new annotation is created, unless you press the save button, it is not saved
2019-03-18 14:48:43 +00:00
Kathy
76bd61b435
C2019-012: Merge pdfs
2019-03-12 12:56:58 +00:00
Kathy
1965776b74
F2019-016: fix replace words typos
2019-03-01 13:20:23 +00:00
Kathy
ad8f2fbad4
F2019-016: fix replace words location and typos
2019-03-01 12:58:18 +00:00
Kathy
0369a7f269
B2019-028: Line spacing at the top of a page may be incorrect if a section contains subsections where a step section follows a Word section.
2019-02-18 16:41:43 +00:00
Kathy
9e5ed20aa2
B2019-022: UCF replace word dialog, remove unsupported flags for case sensitivity (all & first)
2019-02-12 14:04:02 +00:00
Kathy
94cc5c22aa
C2014-009: Allow for edit/print of Notes & Cautions off a sub-step in the right column of Condition Response table (Calvert personnel made update request)
2019-02-07 13:12:01 +00:00
Kathy
31033ae63f
B2019-014: Import of incorrect file type crashes; B2019-015: Improve message on import of UCFs.
2019-02-06 14:29:12 +00:00
Kathy
af5ca6171f
B2019-019: Add message to baseline output for duplex blank page message
2019-02-04 14:10:01 +00:00
Kathy
9657619153
B2019-013: Fix crash when getting section properties if section’s format had UCF checkoffs but none in its derived from format
2019-01-29 15:34:13 +00:00
Kathy
e77ff7c98e
C2019-004: Allow user to define duplex blank page text (handle approved & baseline output)
2019-01-28 16:45:05 +00:00
Kathy
d2aadd3045
C2019-004: Allow user to define duplex blank page text (for build only).
...
C2019-004: Allow user to define duplex blank page text.
2019-01-24 15:51:42 +00:00
Kathy
b8e250f827
B2019-012: Can remove ‘_UCF’ from end of UCF name and save without it.
2019-01-22 14:04:38 +00:00
Kathy
0cb7354084
B2019-006: import of UCFs was hanging
2019-01-18 15:14:19 +00:00
Kathy
6593bb5877
Fixed indenting (tabs versus spaces). No code change - verified through ultra compare
2019-01-18 14:53:46 +00:00
Kathy
bcfeab9aca
C2019-003: Added a separator & confirmation dialog to Unlink of Enhanced Step
2019-01-16 15:10:48 +00:00
Kathy
8ca5295847
B2019-003: Proms crashes when one user is in a procedure and another user tries to enter the same procedure via an itemid
2019-01-08 14:03:32 +00:00
Kathy
b96b577892
B2019-001: ‘Resolved Transition Text’ for transitions going to a section – print only
2019-01-07 16:34:52 +00:00
Kathy
372475d20d
C2018-039: Removed ‘using’ for unused reference, Microsoft.XmlDiffPatch to fix build problem
2018-12-13 12:58:54 +00:00
Kathy
bbcb638024
C2018-039: Upgrade – User Control of Format
2018-12-12 15:34:25 +00:00
Kathy
ddf01e9f9a
C2018-039: Upgrade – User Control of Format
2018-12-12 15:29:56 +00:00
Kathy
e2392f5fec
C2018-039: Upgrade – User Control of Format
2018-12-12 15:25:53 +00:00
Kathy
ca3c786c62
F2018-044: Various format changes as requested by customer
2018-12-06 13:11:14 +00:00
Kathy
bb253fac68
U2018-025: Section transition (transition type 4) should say ‘Step’ due to the way the manual is organized
2018-11-27 16:47:33 +00:00
Kathy
d05b0657f4
C2018-034: Add XSL file support to the Sync program
2018-10-10 14:41:03 +00:00
Kathy
b1e6d50716
F2018-026: various formatting items
2018-10-08 14:28:51 +00:00
Kathy
6e2f4ca31e
B2018-126 & B2018-133: Issues with library document usages – fixed sql error caused by 10/2/18 update
2018-10-04 10:42:46 +00:00
Kathy
b0b15cff0b
B2018-126 & B2018-133: Issues with library document usages
2018-10-02 13:00:22 +00:00
Kathy
d36876bedf
B2018-125: Could remove annotation type if newly created and used without exiting program
2018-09-21 13:19:47 +00:00
Kathy
341a1d3e6a
B2018-118 additional change to fix incorrect ordinal for enhanced tab if no related source caution/note found
2018-08-29 15:49:20 +00:00
Kathy
e868ce2e9e
B2018-120: change of step type (caution/note) that has enhanced was not changing enhanced type.
2018-08-29 15:48:40 +00:00
Kathy
a2c3844ffd
B2018-118: Enhanced tabs are incorrect when mix of (linked & unlinked) Cautions/Notes
2018-08-28 15:10:55 +00:00
Kathy
295cb2a74b
B2018-115: Incorrect step types getting created in background documents
2018-08-24 15:54:24 +00:00
Kathy
fefa774b12
F2018-039: Ginna – add section number to tab in backgrounds
2018-08-23 15:27:14 +00:00
Kathy
c257f4b4bb
B2017-014: Adding a sub-section where section has steps creates 2 section part nodes in the tree
2018-08-21 13:22:06 +00:00
Kathy
9067c3c55d
F2018-038: WCNSAMG sub-format font is different for “First Level Sequential”
2018-08-14 13:18:20 +00:00
Kathy
7654a503a3
2018-08-13 14:07:09 +00:00
Kathy
428cb772e5
F2018-037: WCNSAMGBCK was printing extra section number for Purpose section and Attachment Section (see B2018-101)
2018-08-10 15:38:20 +00:00
Kathy
efc2d818de
B2018-111: Create Missing Enhanced Step on sub-step’s Caution/Note (should not be allowed)
2018-08-09 12:40:14 +00:00
Kathy
59946e12b3
B2018-110: continue message overwriting text in WCN background documents (change UseSmartTemplate to UseOldTemplate)
2018-08-08 14:18:24 +00:00
Kathy
e14f037e8d
Wolf creek FSG background format
2018-07-24 12:02:34 +00:00
Kathy
c598002470
B2018-102 various format changes
2018-07-24 12:01:30 +00:00
Kathy
6bc8f2ee9d
C0218-022: If tab is too long, move text xoffset over for SAMG Supplemental Info (previous fix didn’t work on longer tabs)
2018-07-23 14:29:03 +00:00
Kathy
a6a9305f7d
C0218-022: If tab is too long, move text xoffset over for SAMG Supplemental Info (default flag to false)
2018-07-20 15:22:27 +00:00
Kathy
e5ac83ff10
B2018-101: Enhanced backgrounds have section number twice in step tab when source format has section number in step tab.
2018-07-20 10:39:07 +00:00
Kathy
4cc99a1d6c
B2018-104: Top continue message printed when step was just starting and sub-sub-steps break at less ideal location.
2018-07-16 16:06:36 +00:00
Kathy
5438908754
B2018-103: Incorrect pagination for sub-steps that have sub-steps when Supplemental Information is used.
2018-07-16 11:35:36 +00:00
Kathy
03f07f3aeb
B2018-099: Print all & Approve all of large set crashes with out of memory error
2018-06-29 13:24:15 +00:00
Kathy
8b431d2fe4
C2018-020: Import of procedure when Overwriting has confusing transition list dialog and does not import
2018-06-29 13:08:19 +00:00
Kathy
4104a983a0
C2018-010: Fixed refreshing when applicability is removed on Version Properties dialog
2018-06-13 14:49:47 +00:00
Kathy
c0cdee90b6
B2018-084: Continue message had a character 0xCF in place of a bullet.
2018-06-08 15:41:11 +00:00
Kathy
f9dba790f9
C2018-006: Disable Check and Cascade buttons when doing an Approve All
...
C2018-007: Doing Approve All or Some, only prompt once whether to include Summary of Changes
B2018-083: Fix crash when doing a Approve Some
2018-06-07 13:39:37 +00:00
Kathy
3977cebe1d
B2018-023: With two sessions open, cannot export a procedure set if other session is on VEPROMS tree node
2018-06-04 15:51:04 +00:00
Kathy
7ab18b30d1
B2018-047: crash after paste replace on newly created section within newly created procedure
2018-05-31 13:48:31 +00:00
Kathy
8c84a8b96d
C2018-005: Change Step Type button on the ribbon should be disabled when on Procedure or Section in editor
2018-05-30 13:02:35 +00:00
Kathy
a252b4da5b
B2018-062: PSI OK/Cancel buttons not visible on bottom if more than a few labels/values
2018-05-24 14:32:58 +00:00
Kathy
855b07e5b3
B2018-049: When printing, page sizes are incorrect for 11x17 pages if previous section has supplemental information
2018-03-20 12:39:47 +00:00
Kathy
60b83e9926
B2018-025: Proms crashes opening Working Draft if associated enhanced Working Draft had been deleted
2018-03-01 15:34:22 +00:00
Kathy
181008c9f9
B2018-036: The width was incorrect for sub-steps with tabs off of TitleWithTextBelow type steps.
2018-02-26 15:41:29 +00:00
Kathy
c931802bea
B2018-037: Improve end message location when end message is too low on page based on data on page
2018-02-22 13:24:32 +00:00
Kathy
0f982954b0
B2018-029: Deleted Supplemental Information step appears in pdf
2018-02-21 13:31:24 +00:00
Kathy
90510182a2
B2018-021: Pagination of Supplemental Information (this is an additional fix for a previous update on Feb 8)
2018-02-16 13:20:43 +00:00
Kathy
faeb407c59
B2018-024: Pagination of Supplemental Information
2018-02-16 13:20:12 +00:00
Kathy
3d37e6a61c
B2018-022: Added flag ‘SupInfoIncludeParTab’ to control whether parent tab is included as part of tab for supinfo
...
B2018-022: Use flag ‘SupInfoIncludeParTab’ to control whether parent tab is included as part of tab for supinfo
2018-02-09 16:33:09 +00:00
Kathy
e82b5f1adf
B2018-022: Added flag ‘SupInfoIncludeParTab’ to control whether parent tab is included as part of tab for supinfo
2018-02-09 16:31:09 +00:00
Kathy
bb503e62b0
B2018-021: Supplemental information page not printing when associated with complicated step.
...
C2018-002: Remove checkboxes in supplemental info
2018-02-08 13:50:03 +00:00
Kathy
8b177644f7
B2017-272: For enhanced, use correct section type when creating a new section when previous sections in source are not linked.
...
B2017-272: added a null check
2017-12-12 16:02:30 +00:00
Kathy
3e4c4782bd
B2017-271: Copy/paste procedure, with enhanced background, crashes if missing step(s) in background
2017-12-12 13:48:53 +00:00
Kathy
7dfd2d9738
B2017-268: Fix crash when creating a new enhanced procedure & linking an existing source procedure to it when the Procedure Numbers were different.
2017-12-04 17:05:35 +00:00
Kathy
0acd3ab0c4
F2017-078: SAMG format was created for Shearon Harris based on their EOP format. Supplemental Information was included.
...
F2017-077: SAMG format was created for Robinson based on their EOP format. Supplemental Information was included
2017-12-01 14:36:42 +00:00
Kathy
fd6c50f27b
F2017-077: SAMG format was created for Robinson based on their EOP format. Supplemental Information was included.
2017-12-01 14:33:53 +00:00
Kathy
f31edfe1c5
B2017-228: SAMG Supplemental information facing page pagination bug, break was on sub-step AND after preferred page break, should only be On sub-step
...
B2017-229: SAMG Supplement information facing page pagination bug, do facing page if in 7 lines per inch when on first step of section
F2017-067: Adjusted pagelength to allow for Bottom Continue Message location on 7lpi print
2017-10-03 13:34:27 +00:00
Kathy
fc82fced84
B2017-255: When pasting a source step that has links to an enhanced step into a section that has linked enhanced steps, do not remove the links to the new enhanced step.
2017-09-27 14:34:15 +00:00
Kathy
54f1be3ba1
B2017-222: Don’t create enhanced links for paste replaced steps
2017-09-26 14:33:42 +00:00
Kathy
61a31cec22
B2017-188: Toggle off of SAMG facing pages blank pages checkbox on print dialog was still printing blank pages.
2017-09-22 16:03:51 +00:00
Kathy
fbc4b42ff1
B2017-209: Restoring an enhanced step whose source step is deleted causes crash
2017-09-21 14:08:20 +00:00
Kathy
d80c80f66b
B2017-176: Search Panel - Remove Working Draft Nodes from Tree
2017-09-20 14:57:04 +00:00
Kathy
f01daddf8d
F2017-051: Add space between the step tab & step text for double digit section numbers
2017-09-12 13:36:37 +00:00
Kathy
c87ec88245
B2017-203: missing End message if continuous subsections & 2 sections’ end message on same page
2017-09-12 13:02:48 +00:00
Kathy
83e13a93ee
B2017-196: Hanging indent entered negative numbers rather than indent
2017-09-08 13:14:41 +00:00
Kathy
a74b016fc5
B2017-192: SAMG Supplemental facing page, incorrect steps on facing pages depending on page breaks of steps.
2017-09-01 15:45:27 +00:00
Kathy
94667ff849
F2017-057: initial VC Summer SAMG with Supplemental Info Facing Page format
2017-08-31 16:06:20 +00:00
Kathy
bb99e9d3c3
F2017-056: initial Callaway SAMG with Supplemental Info Facing Page format
2017-08-30 15:40:58 +00:00
Kathy
2258a0b81a
B2017-184: WINDOW tab for Calvert Alarm Procedures getting cut off in edit window in Default text size setting of windows display
2017-08-30 14:05:14 +00:00
Kathy
d42425cbc4
B2017-185: Calvert Alarms – For print, hyphens in window number for top continue message is different than hyphen for step
2017-08-29 15:14:57 +00:00
Kathy
e1bdda3722
B2017-182: deleting a step with transitions, selecting ‘No’ on dialog that asks user to be placed on 1st substep caused hardspace & annotation on step.
2017-08-29 13:11:08 +00:00
Kathy
5e80643686
B2017-183: Don’t allow paste replace for source steps from tree view.
2017-08-28 14:25:30 +00:00
Kathy
5ce26f2350
B2017-180: don’t allow paste replace on source/enhanced steps.
...
B2017-181: fix crash when select/deselect procedure sets in search panel
2017-08-24 13:55:34 +00:00
Kathy
95f4767651
B2017-045: Allow copy of enhanced step pasted to non-enhanced section removing enhanced link data
2017-08-23 12:12:57 +00:00
Kathy
086adde4c6
B2017-106: For Comanche Peak, the top continue message prints on top of note/Caution lines if the note or caution is at the top of the page.
2017-08-17 12:33:34 +00:00
Kathy
fca2704dc4
B2017-058: Summary of Changes report, column information rearranges after table that has no grid audits
2017-08-16 15:50:05 +00:00
Kathy
a413025fcd
B2017-174: Fix crash when linking (Enhanced) a new note (added a null reference check) when first in list with others below it.
2017-08-15 15:22:20 +00:00
Kathy
7eef093c90
B2017-161: Improvements to background pagination
2017-08-15 11:44:53 +00:00
Kathy
f714559e3b
F2017-048: Bottom continue message not centered if pervious step is wide table.
2017-08-10 13:26:42 +00:00