Rich
1baf690bc6
Modified CopyItemAndChildren to speed up copying items
...
Added 1 index on tblContents and 2 indexes on tblItems to speed up copying items
2014-08-28 02:39:53 +00:00
01f078ea4f
Added property ‘BottomIsTable’ for determining that last item with change bar is a table
...
For Calvert Alarms, include table in continuous change bars
2014-08-27 16:48:35 +00:00
9825ea8ff9
Fixed problem where the “Unit Number for Cover and Header page printing” setting was automatically being changed when something on a different property page tab was changed. We needed to un-bind the text box from the working draft config and allow the changes to this text box be handled in our code.
2014-08-27 15:30:20 +00:00
2bfc220948
Fixed the size of the Open PDF button on the PDF Status dialog
2014-08-27 13:57:39 +00:00
Rich
793f4c58df
The Pagination Logic was improved to more properly paginate the alarm procedures for Calvert.
2014-08-27 12:23:56 +00:00
Rich
e8a905af49
When a Hard Return is added to a High-Level step, the RTF command "\line" is added. This was appearing in the TreeView. The code was changed so that the command was replaced with a semicolon.
2014-08-27 12:23:23 +00:00
7a9bdf9dd7
Copied the “Attachment Step – No Header” section type from the Calvert OI format to the Alarm format for use in some Common Alarm procedures
2014-08-26 19:51:50 +00:00
c33fb0af53
BGEALN: Do not duplicate Tab/header for Notes/Cautions/Warnings. Add ‘IsCautionOrNotePart’
...
BGEALN: Various improvements in Calvert Alarms for blank lines within Notes/Cautions/Warnings
2014-08-26 16:36:29 +00:00
ee74919174
Slight increase of width of text for Cautions/Notes/Warnings
2014-08-26 16:35:30 +00:00
Rich
de04f70185
Don't paginate on an OR step if it's parent will fit on a page.
...
Only remove the Condition/Response header if the next Page Break is the first substep of the Condition/Response step.
2014-08-26 11:07:16 +00:00
Rich
293fcb2f1c
Added code to fix error regarding importing procedure
...
Added initial code in preparation for allowing exporting/importing procedure sets with or without audit history
2014-08-26 01:12:18 +00:00
Rich
907ff47e5d
1 Keep Notes/Cautions/Warnings with Condition/Response text
...
2 Don't break Condition/Response text before 3 lines.
3 Paginate Device and Setpoint lists properly
2014-08-25 18:39:36 +00:00
e61898ff07
Turn on bold for Immediate Action high level steps
2014-08-25 16:06:43 +00:00
003ca74e2c
Fixed replace words underline logic
2014-08-25 14:49:29 +00:00
580ca5f63c
Don’t turn off Bold or Underline during Replace Words if entire text is manually Bold and/or Underlined
...
Fix the RNO continue message so that it does not use a bullet character when building the tab for the continue message
2014-08-22 20:20:06 +00:00
310fb42c3c
Fixed logic that determines when a step is continued on next page so that it uses the phonelist length
...
Fixed logic that counts the number of lines a phone list takes
Added number of lines an item take up in our debug (micro-print) message
2014-08-22 17:07:14 +00:00
Rich
9393fc01d4
Fixed logic for Calvert Alarm Condition/Response steps
...
Commented-out debug output
Added logic to keep text from being very bold when it starts with a bullet
Changed continue logic so that "(Continue)" does not overlap with the step tab.
2014-08-22 13:42:53 +00:00
Rich
ba4f16b7e1
Use ActiveFormat rather than FormatStepData.MyFormat (this works for Steps/Sections and Procedures)
2014-08-21 17:52:11 +00:00
45e663f2d3
For Calvert Alarms, when a CONDITION/RESPONSE table had a long list of Notes/Cautions associated with it, the page break was not correct. This was fixed.
2014-08-21 16:41:46 +00:00
9362a5f6d8
Improve location of centered NOTE, CAUTION & WARNING tabs
...
Enclose special case Calvert Alarm blank line handling for Cautions/Notes in Calvert Alarm Flag
2014-08-21 12:34:18 +00:00
899e58cba0
Fixed a null reference when doing an Insert Before
2014-08-20 19:15:23 +00:00
ff57e04521
Added logic to identify that we are in a Condition/Response section of the Calvert Cliffs Alarms
...
Disable the ability to insert a Caution or Note when in a Condition/Response section of the Calvert Cliffs Alarms
2014-08-20 17:52:23 +00:00
Rich
7c26029b92
Fixed logic to correctly determine page break location at the end of a Condition/Response substep.
2014-08-20 16:26:54 +00:00
77e02fd438
Calvert Alarms: CONDITION/RESPONSE top continue messages improvements.
2014-08-20 13:49:22 +00:00
831858d19e
Added logic to allow TitleWithTextRight and TitleWithTextBelow to be available on the type list of the Search function when Searchable is set to True in the format file for these types. Note that the Title type (index 12) must also have Searchable set to True.
2014-08-19 21:10:58 +00:00
e0470e805e
Turned on Searchable for Title, TitleWithTextRight and TitleWithTextBelow
2014-08-19 21:08:19 +00:00
Rich
c0c249825c
Changed logic so that only the first substep skips the CR header
2014-08-19 19:23:32 +00:00
b52a05af12
Allow for continuous change bars with message at top, when flag is changeid
2014-08-19 12:40:18 +00:00
3d2757f094
Calvert Alarms: Make subscript/superscript characters a little bigger for CompressPropSubSup flag
2014-08-19 12:38:23 +00:00
Rich
49ffee4bd0
Change VlnSvgPageHelper TopMessageR(s) to support multiple vlnText items.
...
Corrected logic so that the tab is properly formatted in the continue message. Prior to this change the Tab incorrectly underlined the space following the tab
2014-08-18 18:39:36 +00:00
Rich
dec6a46080
Limit Calvert Alarm logic for Condition/Response to only be run for SpecialCaseCalvertAlarm format flag.
...
Added debug logic for TextAt counter.
2014-08-18 18:38:39 +00:00
Rich
35bed5b381
Added Error Handler to keep code from crashing when a partial replace word is not correctly formated.
2014-08-18 18:37:00 +00:00
8ee514f476
All changes are contained in BGE ALN flags: CONDITION/RESPONSE table top continue message improvements; vertical spacing around bulleted items (where everynlines == 99) fix; if previous step is within template & this is not (and has same type) use template definition (only for Calvert Alarms)
...
Y location Adjustments for Calvert Alarms ‘CONDITION/RESPONSE table top continue messages
2014-08-18 13:35:10 +00:00
a33347b22a
Replace words for bolding [Bxxx], i.e. support for regular expression text in replaceword/with
...
Added TextAt counter for debug
Added debug of TextAt by allowing specifying of ItemIds
2014-08-18 13:34:09 +00:00
c24d6b94ea
Calvert Alarms: 2 consecutive Notes with Warning after did not print correctly.
2014-08-18 13:32:57 +00:00
0ac3d3291f
BGE: Hardcode ALN CPI for HIGH5 (for locating change bar)
...
BGE: Replace words for bolding [Bxxx] in ALN and EOP. ALN CPI for HIGH5 type
2014-08-18 13:31:51 +00:00
Rich
7cdeec91f8
Adjusted the Condition/Response table lines.
2014-08-15 22:32:06 +00:00
Rich
8c5703de65
Logic for page breaks before Condition/Response steps
...
Logic for page breaks within Condition/Response steps
2014-08-15 22:31:30 +00:00
Rich
1aece98d43
Modified code regarding domain name and daily security code
2014-08-13 22:30:08 +00:00
1a03c1b329
BGE: If ‘ANNUNCIATOR COMPENSATORY ACTIONS’ starts on a new page, fixed y-location so does not print too far down on page; fix x-offset of non-tabbed & non-sequential steps in ‘CONDITION/RESPONSE’ table so they don’t overwrite vertical table line.
2014-08-11 15:23:18 +00:00
34dca7cc46
Fixed placement of centered table when high level RNO is longer than the AER substeps
2014-08-08 19:32:09 +00:00
10ae0c3ab1
Adjust widths of items within the template for non-CONDITION/RESPONSE steps
...
Determine if step is within a single column template step
Use width for template items (uses change in format file); fixed HLS continue message location; center table around page center if under a single column template step
2014-08-08 13:46:01 +00:00
Rich
f6c6956381
Modified code to fix error where inserting high level steps failed
2014-08-07 21:02:30 +00:00
Rich
ad6fea21bc
Added code to handle procedure number with space - dash - space in the number
2014-08-07 21:01:50 +00:00
Rich
5e3f6b5e0e
Hide Original Page Break check box from print procedure dialog
...
Changed Harry's MAC domain
2014-08-07 20:10:30 +00:00
0098d6251a
Corrected the page length on the Records section in the single column format in order to prevent the end message from printing past the page boarder (box)
2014-08-07 14:09:17 +00:00
c21ca1547d
Fixed recursion limit of 100 error that happened when inserting a transition in the 137th procedure of a large procedure set
2014-08-06 18:24:40 +00:00
Rich
37a481db24
Added new events NodeCopy and ClipboardStatus, changed paste operations to use MyCopyStep property of tab control instead of clipboard and changed method to determine when paste replace menu item is available
2014-08-06 00:56:13 +00:00
Rich
a17c27c0a8
Added code to raise an error if trying to paste a step in reference to a step that has been deleted by another user (eg: paste before, paste after or paste replace)
...
Added handlers for new treeview events of NodeCopy and ClipboardStatus
Added exception handlers to handle the exception of trying to use a deleted step as a reference point for a paste operation (before, after or replace)
Added code to set the MyCopyStep property to the value of the new step added in a paste replace operation
2014-08-06 00:55:41 +00:00
Rich
b5ded05838
Handle new error when a deleted step is attempted to be copied.
...
Added logic to handle an invalid transition (a transition to a disconnected step.
2014-08-05 19:02:02 +00:00
