4f4513ffe5
Added CenterToStepThenPage format flag which smothly transitions the left margin of a table as the table width increases from the high-level step width to the page width.
Rich
2015-07-13 15:49:08 +00:00
330f36250d
If font is not proportional, set default font to VESymbFix to be used in pdf generation code (without this, the default was set to Helvetica) If 1st character output for chunk, in a table cell, is a hard space (or various other special characters), set font to default (VESymbFix) font. (For HLP)
kruffing2015-07-13 11:37:56 +00:00
00ddf14538
Improve pagination between complicated AER/RNO steps
kruffing2015-07-10 15:37:03 +00:00
30059881f0
increase pagelen of the Procedure step section & set footerlength = 12 if docstyle has bottom messages set footerlength = 12 for Purpose sections Allow a single line HLS that is last in section to print into footer
kruffing2015-07-10 15:36:32 +00:00
d398387142
Fixed Step Designator issues with the Top Continue Message for Comanche Peak
jjenko2015-07-08 13:05:25 +00:00
e2aded8ce4
Made various fixes found during demo preparation B2015-092: If numbered HLS, don’t put a ‘.’ between HLS and sub-step number; null reference check when accessing rofst if none associated with docversion.
kruffing2015-07-07 15:32:49 +00:00
9e6d543133
Adjusted change bar location
jjenko2015-06-30 17:50:50 +00:00
bc5c1ac8ad
Extended the page border length to accommodate the step continue message
jjenko2015-06-29 14:30:14 +00:00
5455804e11
B2015-087: annotation panel not enabled for folders/doc versions
kruffing2015-06-29 13:17:01 +00:00
791549a700
Bug Fix 2015-084 for Ginn’a Attachment format. Fixed logic that determines if a group of Cautions / Notes get a bullet.
jjenko2015-06-24 14:28:01 +00:00
5b527ff533
Added the section number followed by a comma, to the Single Column Attachment Steps and Two Column Attachment Steps page styles.
jjenko2015-06-23 19:16:04 +00:00
26709b08f6
Added Folder Specific information to put the Form Number and Form Rev number at the bottom of each page.
jjenko2015-06-23 17:16:53 +00:00
c0a731021e
Used the “Default” step type to be a “Non-Indented Paragraph”, fixed Approved by PSI text not printing on Cover page sections
jjenko2015-06-23 17:15:29 +00:00
c6ba742fcf
Data Package format for Flex procedures Deviation format for Flex procedures
jjenko2015-06-23 17:14:20 +00:00
712eb8d9e3
(B2015-077) Removed docstyle flag, ‘DontCountInTabOfCont’, in ‘Safety Function Status Check’.
kruffing2015-06-23 16:39:01 +00:00
eb15adfde7
F2015-011: Set RNO font to same as substep
kruffing2015-06-23 14:07:40 +00:00
c98ea48e74
C2015-012: (Comanche Peak) Include asterisk and step designator in Top Continue Message for Continuous Action Steps.
kruffing2015-06-23 13:07:57 +00:00
a038fe06e9
B2015- 076: underlining overwrites text below (occurred on compressed steps with larger font)
kruffing2015-06-22 14:42:46 +00:00
7bc11c7fb6
B2015-071: Fixed handling of sublevels in templates (for EXEBCK) B2015-071: EXEBCK template had spaces in template text, fixed parsing of this
kruffing2015-06-22 14:41:55 +00:00
3c489b709e
B2015-071: Flag HLS as template step
kruffing2015-06-22 14:40:30 +00:00
d114f49eac
Turned on the ability to do a Next and Previous while on a Table
jjenko2015-06-19 17:28:34 +00:00
3aef30629c
B2015-083: For WCNTRN, the Responsibility data was not wrapping correctly in some cases. This was fixed.
kruffing2015-06-18 13:15:36 +00:00
eaa5d49b65
Changed TofCLineSpacing from an INT to a FLOAT to allow for half line spacing Logic to handle float TofCLineSpacing and to shift the section title to section number starting position if there is no section number
jjenko2015-06-17 17:45:31 +00:00
a898601d26
Turned on Auto Table of Contents, adjusted the page length of attachment page Adjusted the size of the page number box to handle pages >99
jjenko2015-06-17 17:44:38 +00:00
82a5480ce2
Added a null reference check
jjenko2015-06-17 14:04:49 +00:00
3045682ed7
B2015-083: For WCNTRN, the Responsibility data was not wrapping correctly in some cases. This was fixed.
kruffing2015-06-17 13:59:12 +00:00
8546a09674
Added PDF SaveLink parameter to methods Added PDF SaveLink Logic
Rich
2015-06-17 11:32:13 +00:00
ee198b5275
Added PDF SaveLink checkbox and methods Added PDF SaveLink parameter to methods Added internal tool to select existing user.
Rich
2015-06-17 11:30:22 +00:00
9bc892a040
AddedPDF SaveLink parameter to methods
Rich
2015-06-17 11:28:53 +00:00
dc686ab082
Added copyright and proprietary statement. Added <docname> was successfully created.
jjenko2015-06-16 20:16:05 +00:00
0f347f27cc
Support 1000-9999 sibling records. The limit had been 999. Westinghouse Alrams exceded this limit
Rich
2015-06-16 19:52:30 +00:00
b4720a578a
‘OR’ replace word had an extraneous ‘{‘
kruffing2015-06-16 16:30:45 +00:00
7dbde80f7c
Add line width, CLineWidth for lines internal to training format Add line width, CLineWidth for horizontal & centerline (WCNTRN) Use docstyle’s CLineWidth for horizontal & centerlines, if defined )WCNTRN)
kruffing2015-06-16 15:36:55 +00:00
8a8818f1fb
Added Error Handling for VETreeNode so that a disconnected TreeNode will not cause the code to crash.
Rich
2015-06-10 13:27:34 +00:00
cf585b9ea9
Adding a new Folder was timing-out during a SQL Stored Procedure. The logic was changed to more quickly determine if the folder could be checked-out.
Rich
2015-06-10 13:26:53 +00:00
8228d0681a
Make HLS items consistent with WCN1 (activate HLS & add last item)
kruffing2015-06-09 15:32:22 +00:00
12c4d98506
slight tweak on location of section number/continue message, in case of longer section number
kruffing2015-06-08 14:44:41 +00:00
c6530cd78f
When a break occurs in the middle of an RNO and AER Sequence start the next page at the highest remaining content including any separators like "OR" or "AND".
Rich
2015-06-05 17:20:31 +00:00
5359e05e77
Page Number for the second pass for transitions to Word Sections were not getting updated properly
Rich
2015-06-05 16:29:51 +00:00
fe8fc4ceec
WCNTRN: Use maxlen for wrapping of responsibility text
kruffing2015-06-05 16:06:55 +00:00
e877c61b7f
Added maxlen for the responsibility column text length WCNTRN: Added maxlen for the responsibility column text length
kruffing2015-06-05 16:06:12 +00:00
577f35faa3
Don't use TableCenterPos for AER or RNO Tables
Rich
2015-06-05 15:46:53 +00:00
4aa90267ad
Allow insertion of figures & various other sub-steps from new HLS type ‘Training unnumbered’ added for Training
kruffing2015-06-05 11:58:17 +00:00
6c5508d777
Add new high level step for Unnumbered HLS rather than using existing ‘Spare’. (to be used in Training procedures for flow chart section.
kruffing2015-06-04 15:52:27 +00:00
57a56eab9d
WCNTRN: do not draw horizontal section line on continued pages
kruffing2015-06-04 14:55:26 +00:00
ea525e2b0b
WCNTRN :Implement printing of items for Wolf Creek Training format
kruffing2015-06-04 14:54:55 +00:00
7cc3f73b66
Adjust boxes DisplayTags panel, set docking to fill (had top)
kruffing2015-06-04 14:52:40 +00:00
3d650e496a
Added Unnumbered HLS Wolf Creek Training Format – continued work
kruffing2015-06-04 14:51:34 +00:00
dd6d76dff7
Fix page number transition if on first page
kruffing2015-06-04 11:25:58 +00:00
265493195d
Adjusted he position of the centered tables
jjenko2015-06-03 19:18:48 +00:00
85ca5e1f1d
Account for extra lines in End message of section when determining pagination (AEP)
kruffing2015-06-03 16:13:11 +00:00
21407f336a
Added format variables for Wolf Creek Training format Save the Y position for the placement of a line after the section title. Also adjust the width of the section title with respect to the section number. All for the Wolf Creek Training format Print a horizontal line after the section header (number and title) for the Wolf Creek Training format
jjenko2015-06-02 21:40:45 +00:00
b2c0a03ab2
Added format settings for the positioning and length of a line to be drawn after the section number and title
jjenko2015-06-02 21:39:21 +00:00
06ba7bf825
Improved accounting for bottom continue messages for pagination Bottom Message (below text) fix and pagination improvements Include RNO separator in ‘BottomContent’ calculation Reset ‘BottomContent’ for each page & added ruler for bottom of page
kruffing2015-06-02 15:09:57 +00:00
65bfcdb9b8
Adjust the XOffset for a table before determining if the table will overlap the RNO column.
Rich
2015-05-29 23:08:10 +00:00
4f16b9ca67
Fixed logic to find external transition when attempting to delete a procedure
Rich
2015-05-29 00:18:09 +00:00
1463ec8853
Remove Unnecessary debug message Fixed logic to find external transition when attempting to delete a procedure Turn-on Table Shrinking Generically
Rich
2015-05-29 00:09:39 +00:00
5b07290ccd
Process page number transitions & change bar location B2015-073: Code for processing page number transitions Allow for step box across page break.
kruffing2015-05-28 16:23:53 +00:00
bb037ba06d
Fixed logic for Shrinking Tables where the Bottom message needs to be adjusted.
Rich
2015-05-28 13:39:15 +00:00
804da7a3ca
Fixed B2015-072, replace words crashing on ‘ [‘ where space is part of bold rtf command. Allow for a step transition to go to another procedure
kruffing2015-05-28 13:16:43 +00:00
e8eed87c3b
Forgot to include update for btnStepRTF
Jim
2015-05-28 02:21:36 +00:00
793335f71e
Added code to fix bug B2015-070.
Jim
2015-05-28 01:47:14 +00:00
37e2227919
Table shrinking support
Rich
2015-05-27 18:48:14 +00:00
cf79062b90
Table shrinking support Support for mutilple ItemIDs in the TextBox in the ToolBar
Rich
2015-05-27 18:46:57 +00:00
39f4daa237
Remove + character (was 16bit bold-off) in replace words for ‘NON’
kruffing2015-05-27 13:22:19 +00:00
a14492ae02
B2015-066: Revert to previous file. (Note that last checkin listed incorrect bug number)
kruffing2015-05-26 16:16:39 +00:00
ba036e23ff
B2015-066: Last update for page number transitions was not correct. This fixes problem. (Note that last checkin listed incorrect bug number)
kruffing2015-05-26 16:16:04 +00:00
06944c6503
Initial Wolf Creek Training Format Initial Wolf Creek Training macros Added WCNTraining flag Use WCNTraining flag to always paginate on subsection Don’t do docstyle reset if in WCNTraining format Do centerline if in WCNTraining format
kruffing2015-05-26 13:59:39 +00:00
d4e030811e
B2015-065: don’t duplicate Page ~/Page Num in page number transitions B2015-065: Pass in correct transition type for resolving page number transitions
kruffing2015-05-26 12:58:05 +00:00
64752c1e33
remove references to WST, adjust boxes
kruffing2015-05-26 12:52:39 +00:00
4ede5de86d
flag for pagenum transition processing removed references to Westinghouse, Title page improvements & top header box for procedure steps
kruffing2015-05-26 12:51:21 +00:00
f005316849
Modified code to support structure changes to treeview nodes
Jim
2015-05-16 17:02:26 +00:00
f66cb15dd3
Added stored procedures to support determining when treeview needs to be refreshed based on other user activities
Jim
2015-05-16 16:59:36 +00:00
1630834fb6
Added flag for DropCheckOff for specific checkoff/sign-off Folder/DocVersion Specific Info in Pagelist items
kruffing2015-05-14 14:42:40 +00:00
36603d643b
Folder/DocVersion Specific Info & remove unused code
kruffing2015-05-14 14:41:19 +00:00
af470cb08b
Folder/DocVersion Specific Info & Sign-off flag
kruffing2015-05-14 14:39:43 +00:00
ab03dfd2ff
Enhancements for handling checkout/modifications at folder and session level
kruffing2015-05-14 14:39:05 +00:00
e61ee1051c
Config get/set (for DocVersion Specific Info data) Config get/set (for Folder Specific Info data)
kruffing2015-05-14 14:37:32 +00:00
b97b6b41d1
Folder/DocVersion Specific Info dialog support and multi-user checks
kruffing2015-05-14 14:36:41 +00:00
46ff7a513d
Proms Express: display format tab for top folder if not using default format Use generic Specific Information field processing
kruffing2015-05-14 14:35:01 +00:00
977b748548
Added flag to allow for Folder/DocVersion Specific Info and pagelist support; sign-offs
kruffing2015-05-14 14:33:50 +00:00
0240b0632b
added Folder & Document Version Specific Information
kruffing2015-05-14 14:32:57 +00:00
da37a78190
multi-user enhancements for Folders/Sessions
kruffing2015-05-14 14:31:48 +00:00
7af7f043fd
Don’t remove the Note/Caution tab on multiples when using the LimitCautionNoteWidthToHLS format flag.
jjenko2015-05-13 17:26:34 +00:00
ae47368d34
Added logic to not extend the change bar on different types of Notes and Cautions if using the LimitCautionNoteWidthToHLS Logic to adjust the Note/Caution width when off of a substep and when using the LimitCautionNoteWidthToHLS format flag. Logic to adjust the Yoffset of a note when off of a borderless table.
jjenko2015-05-13 17:26:03 +00:00
7cb179f085
Added logic to support doing an Add Next or Add Previous on a Table
jjenko2015-05-13 17:25:15 +00:00