4020477158
B2017-071: unlink and create new linked step-tabs are same rather than unlinked being ‘NA’
kruffing2017-05-23 11:56:40 +00:00
4f5585e332
B2017- 092 Added logic to the PDF generation so that duplicate PDF Bookmarks are not added for steps containing supplemental information.
jjenko2017-05-22 15:33:41 +00:00
68aa1e9aab
B2017-091The Checkbox for inserting blank pages for duplex printing was shortened so that it does not run into the Cancel button. It now reads “Add Blank Pages For Duplex Printing”. Also when print a procedure that has facing pages this check box is checked by default. B2017-090 Commented out a line of code that is no longer needed for printing facing pages, but was causing the main procedure to paginate incorrectly. Sped up the logic that calculates how small to shrink the font size on the supplemental information facing page.
jjenko2017-05-22 15:32:47 +00:00
2055fa863e
B2017-073: Pasting image into RO image from context menu crashes
kruffing2017-05-19 14:19:45 +00:00
8280de55e2
First round of reducing the font size of supplemental info text if would not normally fit on a page
jjenko2017-05-18 16:27:09 +00:00
7f4173af82
Logic to keep the supplemental info pages in sync with the SAMG procedure should the sup info print past the end of the page
jjenko2017-05-18 16:26:17 +00:00
7f1fab4877
Increased the page length by two lines and moved starting position up a line for the “Procedure Steps without Section Header” section
jjenko2017-05-18 16:25:44 +00:00
5ea29fbc74
B2017-084: Fix hang when closing PROMS with Word doc open & open/close of RO Editor B2017-084: Fix hang when closing PROMS with Word doc open & open/close of RO Editor.
kruffing2017-05-18 14:13:23 +00:00
ab44a78d9e
B2017-083: Missing procedures in enhanced after creating new enhanced procedure from source, if it first procedure in list
kruffing2017-05-17 12:16:53 +00:00
d5b0ebc1f9
Increased the page length to correct pagination compared to 16-bit output
jjenko2017-05-16 20:05:55 +00:00
881e8c0833
Set the change bar position to the same location as in the EOPs (single and duel column)
jjenko2017-05-16 18:16:59 +00:00
2a34dd3fe0
Moved the Section Number and Section Title up in the Procedure Steps with Section Header section type
jjenko2017-05-16 13:32:26 +00:00
fc672fac31
F2017-037: Adjust location of box and page lengths to increase printable area for procedure step sections F2017-037: Adjust page length so length doesn’t go off bottom of page F2017-037: Increase size of box1 (used for procedure step sections)
kruffing2017-05-15 12:03:53 +00:00
6c2cc93b88
A temporary fix to the template to remove unhandled hard return. Changed the page with of the Step Description Table section
jjenko2017-05-12 20:14:19 +00:00
bbbcdf946a
Add text to checkbox for blank page printing Improve pagination for SAMG facing page print
kruffing2017-05-12 13:50:02 +00:00
d8f00ec197
B2017-081: crash on insert of supplemental information. Cached item was of wrong type. Removed lines of code using this – it was not needed
kruffing2017-05-08 15:55:42 +00:00
3b03233003
B2017-082 Added a check for a RO Path being assigned at the working draft node
jjenko2017-05-05 14:53:47 +00:00
243779476c
The header information for the Appendix Pages, Special Appendix Pages, One Column Attachment Page, Two Column Attachment page and Attachment_Landscape pages will all be consistent with the following format:
mvickers2017-05-04 18:55:33 +00:00
b0e9f99226
Included SupInfo in Search Results and Data Paths Added Indexes to Contents and Items for LastChanged to improve Session Open Stored Procedures
Rich
2017-05-04 14:25:26 +00:00
944cd18c6b
B2017-081: crash on insert of supplemental information (cached item was of wrong type)
kruffing2017-05-04 14:10:23 +00:00
f139c79d32
Support for SAMGS Supplemental Information
kruffing2017-05-03 14:37:25 +00:00
e7f9d4e3ed
Support for SAMGS Supplemental Information
kruffing2017-05-03 13:57:12 +00:00
419dd4712a
Update revision number to 1.4 for SAMG Supplemental Information Add flag for SAMG Supplemental Information
kruffing2017-05-03 13:51:54 +00:00
f59a8f9840
In the Comanche Peak SAMG Data Package format, the Intro page will now have “SAMG DATA PACKAGE” centered at the top under CPNPP. The Procedure Steps page will now have “Guideline Step No.” for the first column heading.
mvickers2017-05-02 21:18:21 +00:00
2c690ac1ef
Increased page length for the Landscape Header Attachment page and decreased the page length for Landscape Header with Border Attachment page.
mvickers2017-05-02 19:14:31 +00:00
ee4708735b
Somehow, the previous update had the old old old FSI information in it. It should have SAMG and PWROG.
mvickers2017-04-27 17:35:32 +00:00
352b5c85b4
Insignificant change made to push this file through that didn't go through on previous update Insignificant change made to push this file through that didn't go through on previous update. (spelled out Comanche Peak SAMG Data Package at the top of the file)
mvickers2017-04-27 13:56:40 +00:00
9285d3ac30
No actual changes made - only added a space to push this file through. File missing from previous update on 4/26/17
mvickers2017-04-27 11:56:49 +00:00
176a4d6511
corrected positioning from the previous update for Comanche Peak SAMG Data Package for GUIDELINE NO, CPNPP and text under CPNPP
mvickers2017-04-26 19:34:06 +00:00
d0f5aa43ca
In the SAMG Data Package format, the text under “CPNPP” will now be centered beneath “CPNPP” in the Introduction section type and the Procedure Steps section type. The word “INSTRUCTION” has been replaced with “GUIDELINE” in the same section types. In the SAMG procedure format, high level steps are no longer bold and multiple notes will print in their own note boxes.
mvickers2017-04-26 18:19:00 +00:00
c5f12b116a
B2017-078 Open the RO FST file for reading and with file sharing of read/write
jjenko2017-04-25 16:49:19 +00:00
9a52e89fd5
B2017-059 only turn on the spellchecking if the RTB is visible
jjenko2017-04-17 15:42:31 +00:00
ff47bd858b
Fixed logic to Copy Search Results to eliminate duplicate steps in the results Fixed logic to Print Search Results to eliminate duplicate steps in the results Fixed logic to prooperly output the procedure number and title
Rich
2017-04-12 14:48:11 +00:00
499c09b9c0
Update AddPDF stored procedure to keep duplicates from causing PROMs to crash when adding an existing record.
Rich
2017-04-10 17:52:03 +00:00
1e7004b5d6
B2017-070 when restoring a deleted step that once had enhanced document link info, remove the link info from the step and its cautions and notes
jjenko2017-03-31 18:09:09 +00:00
de0e7d3613
B2017-069 – remove enhanced document information from the config when a step is restored from history Added a null check
jjenko2017-03-31 15:18:02 +00:00
8f81199574
B2017-068 don’t convert transition to other procedure to text if the link is valid for the paste destination
jjenko2017-03-30 16:57:47 +00:00
0e18aa7b83
B2017-067 don’t give option to use Visio if it is not installed on the machine
jjenko2017-03-30 13:56:30 +00:00
2d23a5e6da
B2017-066 fixed an index out of range when doing a right arrow to walk through table cells where the first column of the table had merged rows
jjenko2017-03-29 18:48:01 +00:00
4d5dc34210
When a deleted RO is found in an MSWord section <SP-C.123> for example, the RO had been replaced with the text RO Not Found. If there were mutiple ROs the specific one with the issue could not be found. Now the token will be replaced with RO (SP-C.123) Not Found. This will make it easier to fix problems when they occur.
Rich
2017-03-29 18:05:12 +00:00
75ec77fd49
B2017-065 Fixed null reference bug happening during a CopyStep / Replace Step of an EOP step that is linked to an Enhanced step
jjenko2017-03-29 16:51:15 +00:00
3935e16f46
Moved the StepCompression to the correct format location (to turn off step compression)
jjenko2017-03-28 17:00:44 +00:00
d441bbc4b1
Moved the PartialStepCompression flag to the correct format location (to turn on partial step compression) Removed redundant PartialStepCompression and StepCompression flags
jjenko2017-03-28 17:00:08 +00:00
26a9fcba81
A bug fix for Farley was causing problems for Facing Page code. It was fixed.
Rich
2017-03-27 14:16:57 +00:00
6ac7897946
B2017-043 If the Edit Window is scrolled horizontally then new steps, cautions, notes or tables need to be located with respect to the horizontal scroll location
Rich
2017-03-24 19:09:09 +00:00
8b5e7e01ad
B2017-060 the update of RO usages of an imported procedure, if RO was not found in the ROUsage table, the import would be aborted instead of converting the invalid RO to text B2017-060 the update of RO usages of an imported procedure, if RO was not found in the ROUsage table, the import would be aborted instead of converting the invalid RO to text. Part of B2017-060 fix were we need to prevent the content text from being disposed when Item is used in a Using statement.
jjenko2017-03-24 14:29:39 +00:00
95d7cbbf98
Added parameter (empty string) to function used in this file part of bug fix B2017-060
jjenko2017-03-24 14:27:55 +00:00
0ee5f8d1c9
Closes F2017-025 and the entire format was redone based upon the CWE format and Paul's requests.
mvickers2017-03-23 20:15:53 +00:00
c4509c6a87
B2017-062 needed to remove square brackets from the IF NOT EXITSTS statement for IX_contentsLastChanged
jjenko2017-03-23 17:41:02 +00:00
156888f6dc
Removed compression and partial step compression at Brian Seo's request. F2017-028.
mvickers2017-03-23 11:04:51 +00:00
19be8b03b9
B2017-061: improve speed of repeated test of newer rofst.
kruffing2017-03-22 13:25:42 +00:00
b6b58e30a0
B2017-061: added an index for a field used in session (multiuser) queries to speed up queries
kruffing2017-03-22 13:24:47 +00:00
dd65177acd
Added ability for user to enter the path to Visio Use the user specified path to Visio, else look in the registry
jjenko2017-03-20 20:32:39 +00:00
ca9e0b2c1c
Added ability for user to enter the path to Visio, Also fixed the Cancel button so that it restores the previous settings
jjenko2017-03-20 20:30:19 +00:00
b8f330718e
B2017-046 added a check for a zero selection length when we check a table cell that uses the symbol font
jjenko2017-03-16 19:28:38 +00:00
41bc492517
B2017-039 Allow insert of High Level Step and substep while on an embedded image sub-step.
jjenko2017-03-08 19:50:13 +00:00
36ed82ba43
B2017-040 Allow range transitions start and end at different step levels
jjenko2017-03-08 19:39:31 +00:00
17b402ab95
Closes C2015-057 – turning on partial step compression for plants that have compression (IP3 gets it from Base).
mvickers2017-03-07 20:25:14 +00:00
5c7e9e4ac2
New file for the RNP AOP Backgrounds (copied from the EOP Background format and modified)
mvickers2017-03-06 20:30:37 +00:00
a302d7a076
Added the No Header Word Accessory Page
mvickers2017-03-02 18:22:15 +00:00
ced517c3cb
Added the Landscape Header Attachment Pages and Landscape Header Attachment Pages with Border section types for Paul.
mvickers2017-03-02 14:26:09 +00:00
32cf8e2f3c
Added Command Timeout to each query that did not have a specified timeout
Rich
2017-03-01 15:42:00 +00:00
b5f4a0751e
Added Command Timeout to each query that did not have a specified timeout Added SQLTimeout Property (Default 30 Seconds) which is 1/20 of the DefaultTimeout (Default 600 seconds)
Rich
2017-03-01 15:41:15 +00:00
aa40ff017d
Added a Timeout property to the FolderConfig Added Command Timeout to each query that did not have a specified timeout
Rich
2017-03-01 15:40:36 +00:00
e77a17d645
Added a SQL Timeout text box to the Folder Property form. Set the Database Default Timeout to twenty times SQL Timeout Property for the top folder. Set the Database SQL Timeout to SQL Timeout Property for the top Folder.
Rich
2017-03-01 15:39:24 +00:00
1eac3a41ca
Added Single Column Foldout Page
mvickers2017-02-28 18:25:21 +00:00
3d6d75e04d
Changed the getContentAuditsSummaryByItemIDandUnitID to run faster
Rich
2017-02-27 16:32:11 +00:00
2c3c5fc9e0
B2017-031 linked enhanced document sections were displaying an ‘@’ sign for sequential sub-step tabs
jjenko2017-02-24 19:44:21 +00:00
3eada0254d
Landscape header attachments and landscape header attachments with border were added. New format added based upon the NSP Deviation format.
mvickers2017-02-23 22:20:08 +00:00
812c4b2c3a
Landscape header attachments and landscape header attachments with border section types were added. The box was increased slightly and the footer adjusted by half line to correct a problem in SAG-3 Step 5 where the bottom continued message printed over the last line of text New format based upon the NSP Deviation format.
mvickers2017-02-23 22:18:49 +00:00
4932c7d28c
Fixed logic to support adding a Caution when a Caution or adding a note when a note exists in Deviation Document Format
Rich
2017-02-20 16:08:23 +00:00
e1019e3454
Fixed logic to support adding a Caution when a Caution exists in Deviation Document Format
Rich
2017-02-17 16:06:16 +00:00
30369c2630
B2017-029 added a check for editing a deviation document before doing some special positioning
jjenko2017-02-16 20:47:34 +00:00
be1a86b43a
Changed Deviation Document Layout: * account for Cautions and Notes * find the first item on a High Level Step (Cautions or Notes) * account for RNOs and Substeps when calculating step height
Rich
2017-02-16 18:24:48 +00:00
4686cb0f6e
Added a check for column mode before adjusting a sub-step note or caution text width
jjenko2017-02-16 17:09:52 +00:00
ea177b4b21
Fixed a null reference error cause by previous update to this file
jjenko2017-02-15 15:50:35 +00:00
fef4b2ba8b
Deviation Documents now display properly in the Step Editor. Cautions and Notes position properly when added
Rich
2017-02-15 14:26:26 +00:00
dea491a3d9
B2017-023 fixed null reference errors when text boxes on Working Draft Specific Information dialog are empty. B2017-024 Added a context menu with windows clipboard options
jjenko2017-02-13 19:26:35 +00:00
f933b59e5f
B2017-024 Added a context menu with windows clipboard options
jjenko2017-02-13 19:24:52 +00:00
ac103b0f77
Fixed a typo in the get of the SectionNumberAndTitleLength flag name
jjenko2017-02-13 14:32:58 +00:00
88876fbe90
Don't remember window state when opening PROMS
Rich
2017-02-10 17:32:48 +00:00
de84adc5ff
Corrected logic to Find Visio Path in Registry
Rich
2017-02-10 17:03:29 +00:00
2459c403ec
Added Error Handling for Null Active Format
Rich
2017-02-10 17:02:58 +00:00
69b7de9fc5
Added Error Log code to record errors when import fails Added Error handling to Import so that Change Manager is turned-on after Import whether it is successful or not. Don't allow import if the Referenced Objects have not been selected. Turn On Change Manager if there are no active sessions Don't crash if the Referenced Objects are not set when you right-click on a Working Draft.
Rich
2017-02-10 16:23:31 +00:00
0deea55d7e
Cleanup Sessions and Owners before beginning a session
Rich
2017-02-10 16:22:09 +00:00
8eb8874b6f
Closes F2017-004. This is my final update for the creation of the Comanche Peak SAMG formats based upon the Flex formats.
mvickers2017-02-09 17:29:31 +00:00
96872600e9
F2017-017 Corrected the Prairie Island SAMG format so that it properly lists the available substep types on the Insert Substep dropdown and on the Tags tab of the Step Properties panel
jjenko2017-02-09 14:45:44 +00:00
0f99ac59f5
F2017-011 fixed logic that was partially overwriting the text in the TitleWithTextRight step type (enhanced backgrounds) Also fixed the positioning of the TitleWithTextRight and TitleWithTextBelow step types on the step editor for enhanced backgrounds null reference check F2017-013 – added logic to SplitTitle to handle when the page list item containing <SectionLevelTitle> also has text (ex: <SectionLevelNumber>) on the same line and we need to split all of that text onto another line
jjenko2017-02-08 20:19:28 +00:00
d88c2fa54b
Added new format variable SectionNumberAndTitleLength
jjenko2017-02-08 20:18:16 +00:00
54cb7cda1f
F2017-011 – removed “FSG” from the Step, Caution and Note tabs F2017-013 Added new format variable SectionNumberAndTitleLength to use for splitting the section title and any text to the left of it (usually the section number)
jjenko2017-02-08 20:15:01 +00:00
665415724c
F2017-013 Added new format variable SectionNumberAndTitleLength to use for splitting the section title and any text to the left of it (usually the section number)
jjenko2017-02-08 20:14:12 +00:00
f9349f418c
Similar format to the CPF Data package; removed extra Caution types Deviation format similar to the CP Flex Deviations Removed extra Caution types
mvickers2017-02-08 19:42:06 +00:00
1ac6f74c11
F2017-015: New Byron-Braidwood SAMG format files
kruffing2017-02-08 16:29:16 +00:00