2356fbadcaAutoTableOfContents, Sub-Sections, new docstyles to support FSP proceduresJohn2014-10-07 19:38:55 +00:00
ea01b9bf71Logic for more control over indenting and underlining on Auto Table of Contents Added logic to prevent multiple numbers (on top of each other) from printing on the AutoTableOfContents, added logic to support format defined section continue text, logic to support EndMessageOnEachSubSection, logic to repeat high level step text as part of a continue message Logic to support DidFirstPageDocStyle flag, logic to support {SECTIONLEVELNUMBER} {SECTIONLEVELTITLE} on the same line of a pagelist item when the section title goes to more than one line.John2014-10-07 19:37:11 +00:00
3162883a66Flag to reset the docstyle when using UseOnFist and separate pagination, field to specify continue text to append to a continued section title, flag to print an end message on each sub-section Setting variables to control indenting and underlining on the Auto Table of ContentsJohn2014-10-07 19:35:56 +00:00
eeb8b9f452For IP2 format, for unused pagelist tokens, don’t write error message to log.Kathy2014-10-07 13:13:57 +00:00
add1510f84For IP2 backgrounds, adjust starting location & width of various steps Made RTBMargin publicKathy2014-10-07 12:25:12 +00:00
f9d0c363f7Support for ‘PaginateOnLowerStepLevel’ pagination flag (for IP2BCK) IP2BCK: Step Description table’s title (Cont) support and various xoffset & margin fixes IP2BCK: Support Step Descriptions table’s title (Cont) message IP2BCK: Implement ‘NoTabAlign’ flag so that tab aligning won’t occur for EquipmentOpt step typesKathy2014-10-03 13:44:46 +00:00
270d5e37d8IP2BCK: Added a flag so that the tabalign code won’t be run for IP2BCK’s equipment opts steps (this code was mis-aligning the bulleted tabs for IP2BCK)Kathy2014-10-03 13:43:19 +00:00
9bb365da74IP2BCK: Don’t underline Step/Note/Caution pagelist item IP2BCK: Added docstyle flag ‘DSS_PageListSpBckgrnd’ for IP2’s special background printing itemsKathy2014-10-03 13:42:39 +00:00
08f2a9f631Fixed logic so that if the high-level step has an end message and the end message would excede the bottom margin, then the step is placed on the next page.
Rich
2014-10-02 13:13:20 +00:00
183bdf015aThe logic was changed to keep the first continuuous subsection on the same page as its header.
Rich
2014-10-01 15:16:34 +00:00
8b9a092708Provide the option to display the PDF before the Page Number Transitions were updated to help the process of correcting pagination. Fix the inheritance lookup for Transtitions
Rich
2014-09-30 20:26:47 +00:00
3b921bed4aAdjusted the length of the Attachment docstyle so that it extends to the bottom edge of the page boarder (box)John2014-09-30 19:50:13 +00:00
81e5f7da84Put the page length for the Attachment docstyle back to what it should be.John2014-09-30 17:19:27 +00:00
765930867aBug fix B2014-106 – tables will now save if the text alignment of a cell was changedJohn2014-09-30 16:42:47 +00:00
912c11a65bFixed logic which parses RTF to handle underline terminate followed by a hard space. This was causing an error for Braidwood.
Rich
2014-09-29 20:12:27 +00:00
791444d2bbChanged replace words in tables so that IF THEN WHEN AND OR do not bold, THEN does not print on a new line. OR does not print at the left edge of the new line.Michelle2014-09-29 17:03:25 +00:00
033e5e9122Align centerd tables with CheckOffs Fix PCPC Print Logic when the next step is not applicable
Rich
2014-09-29 16:17:17 +00:00
b2aa854328Check for a null value if a page break cannot be found in a step. Fixed logic for steps with End Messages.
Rich
2014-09-26 20:05:45 +00:00
237b82df01Change format name to begin with “Byr-Bwd”John2014-09-26 16:10:43 +00:00
84f4153900Add logic to determine if a section has one high level step and an end message to include the height of the end message when a section will not fit on a page. When determining the Page Break location in a step, verify that the item before the page break will fit on the page Add Error Log output if text is low on the page,John2014-09-26 15:39:31 +00:00
eac2037172Consider whether an ‘End’ message is printed when determining page breaks Added error log message ‘End Message LOW on page’, if the end message locates on the bottom line of page list box.Kathy2014-09-25 16:38:03 +00:00
c79e514f3bAdd ½ line to Pagelen of the attachments sectionKathy2014-09-25 16:35:11 +00:00
80f7397451Adjusted change bar locationMichelle2014-09-25 13:24:33 +00:00
1298fa7c38Needed to comment more code still in development.John2014-09-25 13:24:03 +00:00
be5fde936aAdjusted change bar location to 69Michelle2014-09-25 13:23:56 +00:00
ef426ca3e3Fixed issue of blank pages would sometimes have a line down the centerJohn2014-09-25 13:04:06 +00:00
7b2b53bf02Change bars were printing off of the page. Moved the change bar location to the left.John2014-09-24 18:57:14 +00:00
881cbe5bddAdjust HLS width (checklist header) and DocStyle:page length for pagination Display message box after formats/genmacs are copied Improve checklist pagination Improve checklist pagination & right checklist box line alignmentKathy2014-09-24 14:47:36 +00:00
2c6eeee66cAdded bold words from the ALM formatMichelle2014-09-19 13:04:23 +00:00
b27b0ad8bdAdded a FormattedDisplayText for use on Calvert’s Placekeepers Will now handle Bold, Underline, and Super/Sub ScriptJohn2014-09-18 19:58:04 +00:00
29f3db8605BGEALN: Adjust Condition/Response table header to left by 1 characterKathy2014-09-18 16:17:35 +00:00
748e4ad900Adjust Condition/Response table header to left by 1 characterKathy2014-09-18 16:10:21 +00:00
2c2fb9ac3dModified the format name from Indian Point 3 to IP3 for consistency Modified format name to begin with Harrs Modified format name to begin with HarrisMichelle2014-09-17 17:45:22 +00:00
9e51c82aa0completed the bold word list Modified the name of the format file to remove Progress Modified the name of the format to remove ProgressMichelle2014-09-17 17:43:52 +00:00
e785302c9eCalvert: copied steps/sections have change idsKathy2014-09-17 16:44:31 +00:00
373634318bNeeded to add 1 to the page number when generating the Place Keeper pageJohn2014-09-17 15:46:02 +00:00
713ddbb3dfchanged format file name added list of bold words changed format nameMichelle2014-09-17 14:40:21 +00:00
a833185d58Added code to adjust order of refreshing transitions when deleting item that is part of a transition B2014-096 fixed
Rich
2014-09-16 03:18:32 +00:00
033b3514f8Added some error handling to keep from crashing Added code to support Opposite Unit replace words with and without ROs. Added logic to limit UpcaseAllRoUnits to only work for setpoints.
Rich
2014-09-15 21:10:27 +00:00
be08172cf8Change to sub-format titles to exclude the parent title, if the title begins with an asterisk
Rich
2014-09-15 18:11:42 +00:00
bbc56cbf78Fix B2014-103: Notes have extra ‘Note’ tabs fix asterisk hls, bulletted hls and location of change bar/change id on some hlsKathy2014-09-15 15:48:04 +00:00
2f1be0a3a5Added a "FSG Cover Page - Duke Logo" section typeJohn2014-09-12 21:13:31 +00:00
4069371056Added output to the DebugPagination file. Changed the oage break logic to keep a substep with its cautions and notes.
Rich
2014-09-12 20:39:29 +00:00
dfa04a18a5Fixed logic so that Most Recently Used list works when in the development environment.
Rich
2014-09-12 13:58:10 +00:00
9efdfd46c7Added a message to the release text which identifies when a format is changed.
Rich
2014-09-12 13:57:23 +00:00
7d1441c999The FindSectionStart function will now auto correct an invalid value that resulted from the Copy Procedure functionJohn2014-09-12 13:03:54 +00:00
18e8d73d70Modified stored procedure CopyItemAndChildren to fix updating the SectionStart value stored in the procedure config which indicates the default section of a copied procedure.
Rich
2014-09-12 01:07:34 +00:00
018599a9e7Fixed issue of floating foldouts not printing for a procedure that was copied (Shearon Harris)John2014-09-11 17:34:23 +00:00
fbb2df544cWCNCKL: Improve pagination of checklists, i.e. don’t break if 1st substep doesn’t fit on page WCNCLK: ‘SplitText’ moved out of file & use it from RtfToolsKathy2014-09-09 13:11:20 +00:00
aa264a4e5dWCNCKL: added length of smart template HLS (for wrapping) WCNCKL: Set length of smart template HLS (for wrapping) Moved ‘SplitText’ from vlnSvgPageHelper so that it can be accessible from DisplayText (Volian.Controls.Library) and VlnSvgPageHelper (print) Calvert: use item’s format to determine if change id tab should be visible rather than top folder (top folder was used when user was prompted to enter change id for session). WCNCKL: use ‘SplitText’ to handle split/wrap of HLS checklist textKathy2014-09-09 13:10:34 +00:00
d6aae18a46Added code to update FloatingFoldout ItemID value when copying a procedure which contains FloatingFoldout data.
Rich
2014-09-09 00:43:04 +00:00
aa6050a955Changed Rtf to virtual so that vlnParagraph could override the derived property
Rich
2014-09-05 14:30:41 +00:00
8261a6bb55Change a Property name (Prefix) to (PathPrefix) Added generic Properties (Prefix and Suffix) for vlnParagraph Changed Rtf to be lazy-loaded using new method BuildRtf
Rich
2014-09-05 14:29:20 +00:00
4531a04db1Added an error handler if getOwnersByVersionID does not exist in the database.
Rich
2014-09-05 14:28:12 +00:00
0b53f7ec7eImprove pagination so that if steps at lower level have same y-offset as parent, break at parent (recursively until HLS)Kathy2014-09-04 15:37:06 +00:00
74f88b6c1cIf the pagebreak is occuring at a location in the AER and RNO columns, use the maximum step level to determine the proper place to break.
Rich
2014-09-03 19:49:07 +00:00
f8aad3efbcUse new generic property (ActiveDatabase) to access the current database name. Info in email message
Rich
2014-09-03 19:37:58 +00:00
3a7667d9b7Use new generic property (ActiveDatabase) to access the current database name. About Screen Use new generic property (ActiveDatabase) to access the current database name. Name of Export File Use new generic property (ActiveDatabase) to access the current database name. Name of Error Log FIle. Added new generic property (ActiveDatabase) to access the current database name.
Rich
2014-09-03 19:37:24 +00:00
ca30984031Calvert Alarms: fix line spacing around text for Caution1 step type (Annunciator Window)Kathy2014-09-03 13:56:40 +00:00
3ff3ea45c9Fixed issue where version number was not displaying.John2014-09-03 13:17:49 +00:00
8c727377f3Template use: if xoffset from template is 0, don’t use it and use width for wolf creek checklistsKathy2014-09-03 12:21:26 +00:00
21353ceb82Undo previous fix for backspace size – was incomplete solution improve debug performance (used by developers only)Kathy2014-09-03 12:20:44 +00:00
48ecbdea36Added code to change the xml that is added to the config column of the procedure content record when creating a new procedure in a multi-unit working draft.
Rich
2014-09-03 02:14:52 +00:00
080b1098bcAdded Command Line support to set the operating mode to Debug, Demo or Production
Rich
2014-09-02 18:30:48 +00:00
b84141f9e5Added Command Line support to set the server so that we don't need to duplicate the executable folder to create versions that use the local database or SQL2008.
Rich
2014-09-02 18:30:17 +00:00
f5a9e032a2Added a Version Indicator (Debug), (Demo), (Production) the the about dialog.
Rich
2014-09-02 18:29:43 +00:00
0808404beaIf the pagebreak is occuring at a location in the AER and RNO columns, use the maximum step level to determine the proper place to break.
Rich
2014-09-02 15:18:34 +00:00
c99b216e51(B2014-095) Added a BackSpaceSize format variable off PrintData (B2014-095) Use BackSpaceSizeKathy2014-08-28 15:22:31 +00:00
62f9f4f04c(WCNCKL) Added a BackSpaceSize format variable off PrintData (B2014-095) (B2014-094) for WCN1, fix format of section number/step number (to a different section) transition, (B2014-095) for WCNCKL set a size for the backspace characterKathy2014-08-28 15:21:03 +00:00
6a8cad9899Added a necesssary Property (IsSubStep) for ItemInfo that is used for copy/paste,
Rich
2014-08-28 14:05:16 +00:00
d7a7c13b72Added code to display hour glass when copying and pasting items
Rich
2014-08-28 02:42:02 +00:00
f9de5305f2Added code to handle collection was modified error when copying items Added code to make F5 and Shift-F5 keystrokes in the editor work identical to the right mouse button context menu of the tree view with regards to copy and paste of items Added code to assure only items of similar type (eg: procedure, section, high level step, etc) can be copied and pasted at similar locations within a procedure or working draft
Rich
2014-08-28 02:41:23 +00:00
1baf690bc6Modified CopyItemAndChildren to speed up copying items Added 1 index on tblContents and 2 indexes on tblItems to speed up copying items
Rich
2014-08-28 02:39:53 +00:00
01f078ea4fAdded property ‘BottomIsTable’ for determining that last item with change bar is a table For Calvert Alarms, include table in continuous change barsKathy2014-08-27 16:48:35 +00:00
9825ea8ff9Fixed problem where the “Unit Number for Cover and Header page printing” setting was automatically being changed when something on a different property page tab was changed. We needed to un-bind the text box from the working draft config and allow the changes to this text box be handled in our code.John2014-08-27 15:30:20 +00:00
2bfc220948Fixed the size of the Open PDF button on the PDF Status dialogJohn2014-08-27 13:57:39 +00:00
793f4c58dfThe Pagination Logic was improved to more properly paginate the alarm procedures for Calvert.
Rich
2014-08-27 12:23:56 +00:00
e8a905af49When a Hard Return is added to a High-Level step, the RTF command "\line" is added. This was appearing in the TreeView. The code was changed so that the command was replaced with a semicolon.
Rich
2014-08-27 12:23:23 +00:00
7a9bdf9dd7Copied the “Attachment Step – No Header” section type from the Calvert OI format to the Alarm format for use in some Common Alarm proceduresJohn2014-08-26 19:51:50 +00:00
c33fb0af53BGEALN: Do not duplicate Tab/header for Notes/Cautions/Warnings. Add ‘IsCautionOrNotePart’ BGEALN: Various improvements in Calvert Alarms for blank lines within Notes/Cautions/WarningsKathy2014-08-26 16:36:29 +00:00
ee74919174Slight increase of width of text for Cautions/Notes/WarningsKathy2014-08-26 16:35:30 +00:00
de04f70185Don't paginate on an OR step if it's parent will fit on a page. Only remove the Condition/Response header if the next Page Break is the first substep of the Condition/Response step.
Rich
2014-08-26 11:07:16 +00:00
293fcb2f1cAdded code to fix error regarding importing procedure Added initial code in preparation for allowing exporting/importing procedure sets with or without audit history
Rich
2014-08-26 01:12:18 +00:00
907ff47e5d1 Keep Notes/Cautions/Warnings with Condition/Response text 2 Don't break Condition/Response text before 3 lines. 3 Paginate Device and Setpoint lists properly
Rich
2014-08-25 18:39:36 +00:00
e61898ff07Turn on bold for Immediate Action high level stepsJohn2014-08-25 16:06:43 +00:00
003ca74e2cFixed replace words underline logicJohn2014-08-25 14:49:29 +00:00
580ca5f63cDon’t turn off Bold or Underline during Replace Words if entire text is manually Bold and/or Underlined Fix the RNO continue message so that it does not use a bullet character when building the tab for the continue messageJohn2014-08-22 20:20:06 +00:00
310fb42c3cFixed logic that determines when a step is continued on next page so that it uses the phonelist length Fixed logic that counts the number of lines a phone list takes Added number of lines an item take up in our debug (micro-print) messageJohn2014-08-22 17:07:14 +00:00
9393fc01d4Fixed logic for Calvert Alarm Condition/Response steps Commented-out debug output Added logic to keep text from being very bold when it starts with a bullet Changed continue logic so that "(Continue)" does not overlap with the step tab.
Rich
2014-08-22 13:42:53 +00:00
ba4f16b7e1Use ActiveFormat rather than FormatStepData.MyFormat (this works for Steps/Sections and Procedures)
Rich
2014-08-21 17:52:11 +00:00
45e663f2d3For Calvert Alarms, when a CONDITION/RESPONSE table had a long list of Notes/Cautions associated with it, the page break was not correct. This was fixed.Kathy2014-08-21 16:41:46 +00:00
9362a5f6d8Improve location of centered NOTE, CAUTION & WARNING tabs Enclose special case Calvert Alarm blank line handling for Cautions/Notes in Calvert Alarm FlagKathy2014-08-21 12:34:18 +00:00
899e58cba0Fixed a null reference when doing an Insert BeforeJohn2014-08-20 19:15:23 +00:00
ff57e04521Added logic to identify that we are in a Condition/Response section of the Calvert Cliffs Alarms Disable the ability to insert a Caution or Note when in a Condition/Response section of the Calvert Cliffs AlarmsJohn2014-08-20 17:52:23 +00:00