Commit Graph

  • adff92d778 Don’t automatically expend all sub-sections and the steps within them when selecting the main section from the tree. B2016-211 John 2016-10-12 16:12:35 +00:00
  • a16f1d8110 B2016-227 Use Section Margins for Word Sub-Sections Rich 2016-10-12 16:10:08 +00:00
  • f4fc2bf199 Adjust Page Length and Page Width to keep text within borders Rich 2016-10-11 18:14:54 +00:00
  • 146073dcb8 RNO tabs cut off on the edit screen B2015-123 John 2016-10-10 18:47:02 +00:00
  • f6ecb98bc8 Set format flag to use procedure titles as typed when creating a transition, fixed issue were step text was printing too close to the bottom page border. F2016-049 John 2016-10-06 21:07:51 +00:00
  • 4266d2fef0 Account for Section Continue Messsage when doing pagination Rich 2016-10-05 17:40:02 +00:00
  • 454697efdf B2016-222 fixed calculation of box height for notes and cautions at a section level Added a check to prevent an index out of range error John 2016-10-04 19:13:11 +00:00
  • aa3be25330 F2016-048: fix section/subsection number and title printing. Eliminate DocStyle for Attachments (Step Editor) for sections with subsection. Kathy 2016-10-03 14:21:39 +00:00
  • ff0a09a117 Added this file Michelle 2016-09-30 16:36:14 +00:00
  • 980ee2d886 Made title page, PSI, & proprietary info consistent with VCB1, VCB2, and VCBA Michelle 2016-09-30 16:34:54 +00:00
  • d672b83065 Adjusted the End message box and the width of the Appendix section style John 2016-09-30 15:46:09 +00:00
  • 684f39c6ee Adjusted margins, boxes, and fixed length of the end of section messages Michelle 2016-09-29 15:20:10 +00:00
  • 709c61a5c8 Adjusted box sizes & margins Michelle 2016-09-29 15:19:14 +00:00
  • 5db770027f Made format consistent with VCB1 title pages and proprietary information and PSI Michelle 2016-09-29 14:10:46 +00:00
  • 0b5520b49d Adjusted headers, box locations to make consistent with VCB1 Michelle 2016-09-29 14:08:31 +00:00
  • d24df779c3 B2016-217 fixed the alignment of the End Message box. John 2016-09-28 17:54:27 +00:00
  • ba5736d19a Fix B2016-219: VC Summer’s centerline prints on top of figure Kathy 2016-09-28 16:15:10 +00:00
  • 5bd0d550ac Algined the propietary information and doc number (at the bottom of the page) in the the Attachments (Step Editor) with Border for Sections with Subsections section type Michelle 2016-09-28 16:13:29 +00:00
  • 751fb678e7 Restore checkoff->checkoffadjustment value Kathy 2016-09-28 11:02:05 +00:00
  • 257ba5943c Changed right width in the Introduction section, changed top margin for the Appendix, Special Appendix, and Foldout Pages Word sections, added "REFERENCE PAGE for <procedure number>" to the top of the Foldout Pages Word section Michelle 2016-09-27 22:55:39 +00:00
  • 1926a435b0 Replace <u> within a PC P/C PSI Value with the current unit number. Rich 2016-09-27 19:35:36 +00:00
  • 570404687c B2016-216 Don’t put a page break between a group heading and the first item under it. John 2016-09-27 19:18:01 +00:00
  • 72282c3184 Fix B2016-218: do not allow insert before/after (another RNO) when on an RNO Kathy 2016-09-27 15:50:52 +00:00
  • 6f16095159 F2016-033: Replace “User Hold Point” with “Verification Point” step type & support its printing F2016-042: Fix tabbing of section text location (was overwriting number) Kathy 2016-09-27 13:04:35 +00:00
  • 4941dc0f5a Effective date adjustments, footer adjustments, add proprietary to table of contents Effective date adjustments, footer adjustments Michelle 2016-09-26 23:09:49 +00:00
  • e3b2c4f3be Adjustments to the VCB2 format, alignment, etc Adjustments to alignment, position, etc Michelle 2016-09-26 23:07:49 +00:00
  • 234682420f If the Printable Text - X Location is set for an annotation Type and text is entered in the annotation between square brackets, the text will be displayed next to the step with the annotation. This is limited since there mat not be much space next to the step. The location is in points (1/72 of an inch, 36=> 1/2 inch, 18=> 1/4 inch). Also Up and Down arrows can be included in this text, by typing {Up} and {Down} within the square brackets. Rich 2016-09-26 21:11:28 +00:00
  • 645dd85bf7 Step transitions to another Section were being output as Section 3.0 Step 3.4. This change causes the code to output Step 3.4. Rich 2016-09-26 20:36:24 +00:00
  • b6c4258262 Added WEC proprietary information to all pages except title page and auto toc; other tweeking of header information Michelle 2016-09-26 20:25:27 +00:00
  • a9c6129617 Adjustments for the cover page and other section types Michelle 2016-09-26 20:24:39 +00:00
  • 564393b3ac B2016-191 The Watermarks on landscaped sections that also rotates the page header (pagelist) need to be rotated back. John 2016-09-26 19:06:44 +00:00
  • 4ca2769c50 F2016-039: fix text column widths when a checkoff is used for vcb formats Added checkoff formatting (same as vcb1) Kathy 2016-09-26 14:24:21 +00:00
  • 73daac2ce1 F2016-039: fix text column widths when a checkoff is used for vcb formats. Kathy 2016-09-26 13:50:03 +00:00
  • 04927739bf initial Kathy 2016-09-23 16:03:01 +00:00
  • 5b25cf6d6c Added code so that Means can be printed properly. Rich 2016-09-23 14:43:42 +00:00
  • 89f2a58397 Step transitions to another Section were being output as Section 7.1.3 Step 7.1.3.g. This change causes the code to output Step 7.1.3.g. Rich 2016-09-23 14:43:10 +00:00
  • 352be2695a Removed Unit Number from PSI Michelle 2016-09-23 11:39:16 +00:00
  • 1bf41bc8b6 C2016-028: adjust location/length of procedure title on landscape word sections Kathy 2016-09-22 14:12:02 +00:00
  • 41ec066d69 Fixed logic to account for the Section Continue Message at the top of the page. Rich 2016-09-22 14:06:30 +00:00
  • 7297dc1706 Corrected the Bubble Help to describe the function of the Convert to DocX button Rich 2016-09-19 16:16:01 +00:00
  • ebbc57e5bb Fixed the visibility of the Convert to DocX button so that it is not visible for Library Documents, Automatic Table of Contents or Step Sections. Rich 2016-09-19 16:15:28 +00:00
  • b4d867a517 B2016-209 – the dash (hyphen) character was not found in Word sections John 2016-09-16 18:08:30 +00:00
  • 65d9e6231d Added support for VCB Unit Numbers Rich 2016-09-16 15:22:27 +00:00
  • 0cc449483a Remove Hard Coded Unit Number Rich 2016-09-16 15:21:50 +00:00
  • a9d7d99a3a Use VCBUnit Token Rich 2016-09-16 15:20:39 +00:00
  • 37f210af93 Added No Header Word Accessory Page to their section types Michelle 2016-09-16 15:07:52 +00:00
  • ea777fc938 Adjusted the name column by moving it to the right three characters so that when text in the name field wraps, it does not overwrite the component number column. Michelle 2016-09-15 19:46:02 +00:00
  • f2c175f58a Modified the format to the customers request - headers match vcb1, procedure information changes, information added to PSI to print at the bottom left margin Michelle 2016-09-15 11:25:29 +00:00
  • 537ec8c2fe B2016-204 – needed to pass in the document file extension when we create a new word document in converting a library document to a regular word section. John 2016-09-14 17:30:16 +00:00
  • 0f4378913f The logic that handles backslashes in RO return values did not account for the Unicode hard space character. John 2016-09-14 15:23:08 +00:00
  • 54334cc233 Added button to convert MSWord sections to DocX Rich 2016-09-13 21:11:28 +00:00
  • f989e52a13 B2016-182 fixed replace word logic that was replacing words surrounded by dashes John 2016-09-13 18:03:48 +00:00
  • 6a737a961d Fix for auto TOC grouping logic (B2016-200) and for line spacing consistency (B2016-205) John 2016-09-12 18:47:05 +00:00
  • ae4d9fa4b1 Replaced the WEC header boxes in the VCB2 format with the header boxes in the VCB1 format. Michelle 2016-09-09 17:17:23 +00:00
  • 2405d1c86f Modified headers and boxes on the page so that they are all the same (Attachments - Word section style still needs adjusted) Michelle 2016-09-09 17:16:28 +00:00
  • 36e4b0c3ab Added check for even page number before printing Auto Table of Contents to determine if blank page should be printed. B2016-181 John 2016-09-06 19:33:14 +00:00
  • a5707e2cdf Removing mv from the procedure title (accidentally left in from April) Michelle 2016-09-02 14:18:58 +00:00
  • 1ba918cfd8 Added logic to use “{DB}” as the connection Initial Catalog setting which will be replaced with the specified database name from the \DB command line switch John 2016-09-02 14:05:33 +00:00
  • 0245c9fe7a Fix to import Transitions in Grids (tables) and handle the dash characters Added a Set method to MyGrid John 2016-08-31 18:40:25 +00:00
  • ae2473ba24 Fix to import Transitions in Grids (tables) John 2016-08-31 18:39:25 +00:00
  • dcedc10ba9 Add checkoff xml back in (from wst1) and fix numbering off a bullet (F2016-030 & 031) Kathy 2016-08-25 15:29:31 +00:00
  • 0d60f4fb66 Adjusted the position of the procedure title both vertically and horizontally for the landscape word section type. Michelle 2016-08-25 15:02:31 +00:00
  • f62fd3bf61 Added a tool tip to the Printable Text position entry on the Annotations tab John 2016-08-24 21:16:55 +00:00
  • f576fc928e Added the "Blank Checkbox" symbol. Generic item requested by WCN. Michelle 2016-08-24 12:30:43 +00:00
  • 29794ec5a9 Added some debug code for testing the function above. After the code was finished, the debug code was commented-out. Rich 2016-08-22 20:27:42 +00:00
  • 30c7c16cd0 Fix the RTF for grid cells so that Text is set to use a Text font rather than a Symbol font. Added some debug code for testing the function above. After the code was finished, the debug code was commented-out. Rich 2016-08-19 15:31:43 +00:00
  • 948161603a Set the default text font based upon the current format for Tables. Rich 2016-08-19 15:30:04 +00:00
  • e9a42b1b45 B2016-189: Fix formatting of ‘and’ transition type Kathy 2016-08-16 13:00:37 +00:00
  • ef338c9e74 remove VCB1 tabbing code because of change of tabs; step tab on Example should skip paragraph level if off paragraph Kathy 2016-08-12 16:23:16 +00:00
  • df2240ad94 VC Summer 2 column VC Summer admin Kathy 2016-08-12 16:21:12 +00:00
  • 653d72fc22 VC Summer 2 column VC Summer admin change step numbering to be like WST1; fix through transition text (B2016-177) Kathy 2016-08-12 16:20:26 +00:00
  • 27480ff321 Removed the word "Ballot" from the symbols "Box with Check" and "Box with X" Michelle 2016-08-12 15:08:09 +00:00
  • e7a1619945 when building an export file (from the Approved procedure) replace any forward slash or backslash used in the rev number (user types in the rev number) John 2016-08-12 13:29:15 +00:00
  • d46ee4e39c Keep special characters for Enhanced Document Text Rich 2016-08-11 19:31:52 +00:00
  • d42a05a1f4 For Parent/Child procedures, added the Child name (ex. Unit 1) to the export filename when you export from the Approve Version John 2016-08-11 17:53:27 +00:00
  • df152b7b67 The Through transition type now puts the word “through” in the transition John 2016-08-10 20:03:49 +00:00
  • 2a60c36d25 Table off of Caution or Note Rich 2016-08-10 18:03:19 +00:00
  • 2f974705dd Adjusted the position of the OK and Cancel buttons John 2016-08-10 16:38:18 +00:00
  • d6e23d63d1 Verify that an RO Table or Text Table can be added for an RNO. Rich 2016-08-09 20:04:59 +00:00
  • 1a52a4d79e Changed the default font of the No Header Word Accessory Page to Arial (the font used throughout their format). Michelle 2016-08-09 17:32:03 +00:00
  • 20babc4db3 Added TurnOffReplaceWords=True F2016-024 requested by PAL. Michelle 2016-08-09 13:18:27 +00:00
  • d2384ef4c3 Enhanced Documents - Change Bars Rich 2016-08-09 13:10:58 +00:00
  • f9029bb00b Enhanced Documents - Change Bars are based upon the source document rather than the step which is automatically updated Rich 2016-08-09 13:06:15 +00:00
  • 1bf77667b2 Give option to import RO’s as text when the RO path of the import is different than the target procedure set Prompts user with options on what to do with the import of a procedure that has a different RO path than the target procedure set. John 2016-08-09 12:33:01 +00:00
  • 0804ecc7ee B2016-174: PartialStepCompression does not work correctly for Background formats (those steps that use PageBreakOnStep format flag) Kathy 2016-08-09 11:37:12 +00:00
  • 202ef89909 Added ballot box with check and ballot box with x for vcb. C2016-026. Michelle 2016-08-08 14:14:12 +00:00
  • 60e7c9a140 Notes and Cautions off of Sections with substeps were not expanding in the editor Rich 2016-08-04 20:03:16 +00:00
  • a2835ab73d Added Warning with triple line box, Adjusted PSI Use Class text X-location Support for Printing ‘[xx]’ text within an annotation by allowing for xlocation on dialog. Triple Line Box around note or caution Kathy 2016-08-04 10:35:26 +00:00
  • ac47021609 Added a null reference check for selectedDVI on the tc_PanelTabDisplay() function. Added logic to skip the checks for changed integrated graphics (figures) when the RO database has none. John 2016-08-03 18:52:14 +00:00
  • 56ab02c3f7 Refresh NextItems when looking for Range transition Item Dispose of steps as they are imported. Rich 2016-08-03 15:12:04 +00:00
  • 4293219f16 Added a “Section Sign” symbol § John 2016-08-01 19:23:11 +00:00
  • e7302a504e B2013-154: enter-key from RNO in single column -> fix incorrect insertion/display of new RNO Kathy 2016-08-01 15:30:36 +00:00
  • ffd8d0d530 Changed Partial step compression to False & for the step description table section, changed page length to 660 from 624. This is related to B2016-174 & is the same change made to CALBCK. Michelle 2016-07-29 13:16:30 +00:00
  • cac8107124 Increased page length from 624 to 660 to support pagination after removing partial step compression in yesterday's update Michelle 2016-07-28 18:13:53 +00:00
  • 2b2fd0bf87 Remove PartialStepCompression for temporary fix for B2016-174. Kathy 2016-07-27 14:12:04 +00:00
  • 1333d820a1 Adjust column for Procedure title printing so it doesn’t write on left box line for Word attachments Kathy 2016-07-27 13:37:27 +00:00
  • 254d15948f Fixed issue of Import Procedure has same RO Path but a different ROdbid number Fixed issue where the top box of the dialog was not displaying the “&” character used in the RO Path John 2016-07-26 15:25:48 +00:00
  • 146e1fb968 New Table of Contents flags & MaxWidth for PSIs (for current page) Improve message when format is changed and not certain if section type is valid. (part of B2016-165) vcb1: Added MaxWidthCurPage for PSI text widths (use for current page) vcb1: Table of Contents values for subsections line spacing and grouping section numbers Table of Contents to handle single space subsections & Grouping section names remove group title Use MaxWidthCurPage to handle max width, but don’t account for multiple lines when printing content Kathy 2016-07-25 15:04:23 +00:00
  • 4feea15106 Added the No Header Word Accessory Page for printing large WORD sections (11 x 17) Michelle 2016-07-20 15:43:46 +00:00
  • 2099596290 B2015-134 Hanging Indent with Hard Returns was not being saved Rich 2016-07-20 12:43:40 +00:00