Rich
aa6050a955
Changed Rtf to virtual so that vlnParagraph could override the derived property
2014-09-05 14:30:41 +00:00
Rich
8261a6bb55
Change a Property name (Prefix) to (PathPrefix)
...
Added generic Properties (Prefix and Suffix) for vlnParagraph
Changed Rtf to be lazy-loaded using new method BuildRtf
2014-09-05 14:29:20 +00:00
0b53f7ec7e
Improve pagination so that if steps at lower level have same y-offset as parent, break at parent (recursively until HLS)
2014-09-04 15:37:06 +00:00
Rich
74f88b6c1c
If the pagebreak is occuring at a location in the AER and RNO columns, use the maximum step level to determine the proper place to break.
2014-09-03 19:49:07 +00:00
ca30984031
Calvert Alarms: fix line spacing around text for Caution1 step type (Annunciator Window)
2014-09-03 13:56:40 +00:00
8c727377f3
Template use: if xoffset from template is 0, don’t use it and use width for wolf creek checklists
2014-09-03 12:21:26 +00:00
Rich
0808404bea
If the pagebreak is occuring at a location in the AER and RNO columns, use the maximum step level to determine the proper place to break.
2014-09-02 15:18:34 +00:00
c99b216e51
(B2014-095) Added a BackSpaceSize format variable off PrintData
...
(B2014-095) Use BackSpaceSize
2014-08-28 15:22:31 +00:00
01f078ea4f
Added property ‘BottomIsTable’ for determining that last item with change bar is a table
...
For Calvert Alarms, include table in continuous change bars
2014-08-27 16:48:35 +00:00
Rich
793f4c58df
The Pagination Logic was improved to more properly paginate the alarm procedures for Calvert.
2014-08-27 12:23:56 +00:00
c33fb0af53
BGEALN: Do not duplicate Tab/header for Notes/Cautions/Warnings. Add ‘IsCautionOrNotePart’
...
BGEALN: Various improvements in Calvert Alarms for blank lines within Notes/Cautions/Warnings
2014-08-26 16:36:29 +00:00
Rich
de04f70185
Don't paginate on an OR step if it's parent will fit on a page.
...
Only remove the Condition/Response header if the next Page Break is the first substep of the Condition/Response step.
2014-08-26 11:07:16 +00:00
Rich
907ff47e5d
1 Keep Notes/Cautions/Warnings with Condition/Response text
...
2 Don't break Condition/Response text before 3 lines.
3 Paginate Device and Setpoint lists properly
2014-08-25 18:39:36 +00:00
580ca5f63c
Don’t turn off Bold or Underline during Replace Words if entire text is manually Bold and/or Underlined
...
Fix the RNO continue message so that it does not use a bullet character when building the tab for the continue message
2014-08-22 20:20:06 +00:00
310fb42c3c
Fixed logic that determines when a step is continued on next page so that it uses the phonelist length
...
Fixed logic that counts the number of lines a phone list takes
Added number of lines an item take up in our debug (micro-print) message
2014-08-22 17:07:14 +00:00
Rich
9393fc01d4
Fixed logic for Calvert Alarm Condition/Response steps
...
Commented-out debug output
Added logic to keep text from being very bold when it starts with a bullet
Changed continue logic so that "(Continue)" does not overlap with the step tab.
2014-08-22 13:42:53 +00:00
45e663f2d3
For Calvert Alarms, when a CONDITION/RESPONSE table had a long list of Notes/Cautions associated with it, the page break was not correct. This was fixed.
2014-08-21 16:41:46 +00:00
9362a5f6d8
Improve location of centered NOTE, CAUTION & WARNING tabs
...
Enclose special case Calvert Alarm blank line handling for Cautions/Notes in Calvert Alarm Flag
2014-08-21 12:34:18 +00:00
Rich
7c26029b92
Fixed logic to correctly determine page break location at the end of a Condition/Response substep.
2014-08-20 16:26:54 +00:00
77e02fd438
Calvert Alarms: CONDITION/RESPONSE top continue messages improvements.
2014-08-20 13:49:22 +00:00
Rich
c0c249825c
Changed logic so that only the first substep skips the CR header
2014-08-19 19:23:32 +00:00
b52a05af12
Allow for continuous change bars with message at top, when flag is changeid
2014-08-19 12:40:18 +00:00
3d2757f094
Calvert Alarms: Make subscript/superscript characters a little bigger for CompressPropSubSup flag
2014-08-19 12:38:23 +00:00
Rich
49ffee4bd0
Change VlnSvgPageHelper TopMessageR(s) to support multiple vlnText items.
...
Corrected logic so that the tab is properly formatted in the continue message. Prior to this change the Tab incorrectly underlined the space following the tab
2014-08-18 18:39:36 +00:00
Rich
dec6a46080
Limit Calvert Alarm logic for Condition/Response to only be run for SpecialCaseCalvertAlarm format flag.
...
Added debug logic for TextAt counter.
2014-08-18 18:38:39 +00:00
8ee514f476
All changes are contained in BGE ALN flags: CONDITION/RESPONSE table top continue message improvements; vertical spacing around bulleted items (where everynlines == 99) fix; if previous step is within template & this is not (and has same type) use template definition (only for Calvert Alarms)
...
Y location Adjustments for Calvert Alarms ‘CONDITION/RESPONSE table top continue messages
2014-08-18 13:35:10 +00:00
a33347b22a
Replace words for bolding [Bxxx], i.e. support for regular expression text in replaceword/with
...
Added TextAt counter for debug
Added debug of TextAt by allowing specifying of ItemIds
2014-08-18 13:34:09 +00:00
Rich
7cdeec91f8
Adjusted the Condition/Response table lines.
2014-08-15 22:32:06 +00:00
Rich
8c5703de65
Logic for page breaks before Condition/Response steps
...
Logic for page breaks within Condition/Response steps
2014-08-15 22:31:30 +00:00
1a03c1b329
BGE: If ‘ANNUNCIATOR COMPENSATORY ACTIONS’ starts on a new page, fixed y-location so does not print too far down on page; fix x-offset of non-tabbed & non-sequential steps in ‘CONDITION/RESPONSE’ table so they don’t overwrite vertical table line.
2014-08-11 15:23:18 +00:00
34dca7cc46
Fixed placement of centered table when high level RNO is longer than the AER substeps
2014-08-08 19:32:09 +00:00
10ae0c3ab1
Adjust widths of items within the template for non-CONDITION/RESPONSE steps
...
Determine if step is within a single column template step
Use width for template items (uses change in format file); fixed HLS continue message location; center table around page center if under a single column template step
2014-08-08 13:46:01 +00:00
c6122d5a95
Blank lines around Multiple Cautions/Notes
...
Getting Template Item/compare text AND type (in code that only BGE Alarms uses)
Blank lines around Multiple Cautions/Notes; Don’t do alarm box if box ended on previous page (only occurred when break was on substep of non-boxed step).
2014-08-05 12:51:19 +00:00
9b67771f55
Additional code to support special cases in Template for Calvert Alarms including a TemplateColumnMode and mix of Cautions/Notes
...
Added Support for BGE Alarms, bottom continue message location.
Additional code to support special cases in Template for Calvert Alarms and new flag SpecialCaseCalvertAlarm
Support for Docstyle DSS_PageBreakHLS for page break on HLS
Changes for Calvert Alarms use of template to define top portion of alarm pages and CONDITION/RESPONSE table support.
Handle 3 top/bottom continue messages for Calvert Alarms; support box around CONDITION/RESPONSE table in Calvert Alarms; {REVUNIT} fix;
if TabPtsPerChar format is 0, set to a default of 6
2014-08-01 11:56:02 +00:00
Rich
a16ea8a6ac
Fixed CopyItemAndChildren so that change bars are not changed for copied procedures.
...
Changed logic so that VE-PROMS source code can be located in either 16Bit or 16-Bit folders
This strips prerequisite step references from procedure text when printing
Recursive transitions cannot be added to procedure text. If you try to add a transition to a step that contains the text of the step, you will be told that this is not permitted.
Default Change IDs were not being properly updated.
Added footer line to the debug rulers when creating a PDF.
Removed Prerequisite Step references in the PDF bookmarks
2014-07-22 00:05:06 +00:00
e6b45641cd
If we cannot find a space character to split on, then break up the word ( SplitText function)
2014-07-15 01:58:27 +00:00
beb97b57e8
In single column mode, allow one blank line between HLS and first RNO
2014-07-15 01:57:56 +00:00
b13b6799cf
BGE: Fix code to widen RNO column widths for two column step sections
2014-07-08 11:11:27 +00:00
c9cdc35ff2
fixed a problem where the ‘Page x of y’, or any page list item that had text & one or more tokens, was bolding when it should not be bolded
2014-06-30 12:20:38 +00:00
9fb17c103c
Added flag CompressPropSubSup for compressing proportional fonts sub & superscript (used by Calvert)
...
Use CompressPropSubSup
Use CompressPropSubSup
2014-06-27 12:16:10 +00:00
76cec2c961
Don’t try to initialize the signoff drop-down if there are no sighoffs
...
Added logic to support Prerequisite step information and to handle the indent character
Logic to pass font information to the Placekeeper logic
2014-06-26 20:19:58 +00:00
Rich
c74dd9f7ac
Added code to resolve an issue with summary of changes report involving the renumbering of steps when a new step is added and subsequently deleted.
2014-06-24 02:04:10 +00:00
Rich
0d99f81701
Use ChangeIDs format flag to control whether the Change ID is displayed on the change bar.
2014-06-20 14:10:30 +00:00
b1cd9ea1a3
Added a flag for the box around continuous action substeps
...
fix for Point Beach continuous action substeps
2014-06-09 18:18:04 +00:00
f675e6c866
BGE: Fixed RNO Tab from AER that is bullet
...
B2014-072: Do not display Page Number checkbox, transitions with page number are included in list of transition types
B2014-070: Fix null reference access if editing a procedure step title in the step editor when format uses change ids
BGE: RNO X-offset location and note/caution y-offset improvements
2014-06-05 12:52:29 +00:00
Rich
7ea6df9049
Correctly calculating the size of a high-level step (YSize) to include the box surrounding the first step
2014-06-04 18:30:32 +00:00
Rich
d345997474
Added call to SetupSecurity after closing edit user dialog
...
Aded code to corect how Summary of Changes report was processing list of changes
Added code to account for double line box around high level steps
Added code to resolve printing cautions and notes associated with substeps
2014-06-03 21:39:37 +00:00
Rich
b3abf86b9f
Properly position OR at the top of a page when required
2014-05-30 13:35:04 +00:00
2e54123c79
commented out menu item for procedure’s removal of change ids
...
section continue message no longer prints if section/not hls break; bottom continue message no longer prints over bottom of text if close to bottom of page; end of section message no longer prints for subsections
2014-05-29 13:24:29 +00:00
6d0a14c364
Add new macro settings to allow for a different checkoff macro when a step element is in single column mode
...
Logic to support the new macro settings which allows for a different checkoff macro and position when a step element is in single column mode
2014-05-27 16:51:23 +00:00
