99cbb788f2
Corrected the starting location of the step edit window for steps 1-9 so that they start at the same location as step 10 and greater
...
Fixed the positioning of the Fixed Change Bar to use the format default font rather than the current step / substep font, to ensure consistency.
2015-01-07 17:41:57 +00:00
1d0dca79b4
fix text width for 2nd level sections (WCN); do not print section continue message if subsection starts at top of page (BGE)
2015-01-06 14:19:17 +00:00
c2abe9214b
Fixed print bug where Calvert IO4 procedure OI-27D-2 would not print.
2014-12-05 21:13:56 +00:00
27c8d89bed
For tab comparison, trim strings before doing comparison in code that determines whether subsection number is derived from section number (IsSubsectionNumber)
...
If parent was continuous & this is separate, need to paginate to get subsection on its own page
For sections/subsections: if parent was continuous & this is separate, don’t reset docstyle until after separate section pagebreak; if separator location is ‘0’, x-offset should be at tab not text of step
2014-12-04 16:03:06 +00:00
06df9a9233
Adjusted the y position after printing a End Message so that the next section (set to continuous pagination) will print below the End Message.
2014-12-02 16:20:21 +00:00
234f55ea77
Use vlnParagraph for footnotes so that Change Bars will print (rather than vlnText)
2014-12-02 15:26:25 +00:00
6953d5a88b
BGE: If top section continue message is for a subsection, use parent rather than current section for text.
2014-11-18 16:47:17 +00:00
f68a68c63a
Calvert: fixed printing of 'Date Time Note' in previous siblings box - now prints it separately without box.
2014-11-14 15:04:07 +00:00
d06c896795
fixed issue with placing an End message at the end of sections that are printed with the continuous pagination setting
2014-11-13 20:24:08 +00:00
Rich
cf8d11623b
Enter Key on High Level step will default to the current step type
...
Fix logic for continue message indent
2014-11-13 20:09:41 +00:00
7d3b8872c8
Added properties for IsSubsection, IsSubsectionNumber and IsSeparateSubsection
...
Improved debug
Calvert: Improved tab on Section Continue Message and print missing Section Continue Message
2014-11-13 15:50:46 +00:00
bcc0ec5a3b
force alignment of ‘Unnumbered High Level Step’ with section text
...
Calvert: force alignment of ‘Unnumbered High Level Step’ with section text
2014-11-12 15:17:17 +00:00
Rich
9eed40353e
Changed logic to properly output checkoff header "INITIALS"
2014-11-12 06:41:47 +00:00
5cc512234e
RNO xoffset
...
RNO xoffset & “Improved Box with Paragraph” printing
“Improved Box with Paragraph” box location
fix possible null reference for determining auto indent of meta-sections
Calvert: using format flag IdentWidth in defining tab width if it is set in format file
2014-11-11 15:45:11 +00:00
Rich
310c7a108c
Added logic to center single small (1 line) Cautions, Notes or Warnings
2014-11-11 03:46:05 +00:00
Rich
3237a2345b
Fixed Logic to limit size of figures to use the whole page and keep the the same aspect ratio.
2014-11-10 18:23:44 +00:00
4fea758321
For Calvert, section/subsection xoffset was not considering autoindent flag setting on section property when printing section/subsection numbers and titles.
2014-11-07 16:51:38 +00:00
235b6f7472
Added Print/HorizontalSubstep flag (default to false). Was in 16bit to flag footnotes for BGEVL (in addition to NotesToFootnotes
...
Set HorizontalSubstep flag to true (for Note type as footnote)
Added property ‘IsFootnote’; for Calvert formats: don’t bullet a single note/caution
Added HorizontalSubstep flag
Use ‘IsFootnote’ property to determine if a note is a footnote.
2014-11-06 14:30:40 +00:00
Rich
32ddfbbce0
Fixed logic to keep code from crashing.
2014-11-06 02:48:50 +00:00
Rich
344b7f9ab7
Changed the logic to match the logic for bulleted steps
2014-11-05 17:04:10 +00:00
Rich
b89af73735
Made Status Change available to other print objects
...
Update status when moving through a section with subsections
Update status when moving through a section with subsections
GetSectionInfo use local value rather than using the cache
Used SectionInfo property HasStepCheckOffs to turn-on CheckOff header and narrow text width.
2014-11-05 14:36:17 +00:00
3daa13f4b6
Fixed background document pagination
...
adjusted sub-step text width when they have a tab (background documents)
2014-11-04 21:14:16 +00:00
c46b4de7ab
Alignment and positioning of pagelist items, fixed line spacing of some text elements
...
Added a null check
logic to keep the text widths consistent for enhanced background Caution/Note steps
2014-11-04 17:16:46 +00:00
792fede090
Calvert: fix extra blank lines around single caution/notes (for Calvert formats only)
2014-11-04 11:56:37 +00:00
a45c860de4
Don’t underline “(Continued)” in the top section continue message
...
Fixed the creation of the section continued message tab
2014-10-31 19:03:24 +00:00
6f1d41879f
Turn on indent of sub-sections in Table of Contents. Count the pages of the Cover, List of Effective Pages, and Table of Contents when generating the Table of Contents.
...
Put a page number for the Valve List sections in the Table of Contents
Fix the bolded numbers problem in the Table of Contents
2014-10-30 16:40:24 +00:00
09c88e8948
fixed footnote tabbing in editor & made other note types inactive
...
BGEVLV: for ‘TitleWithTextRight’ types, position correctly on screen if no children for this type
BGEVLV: don’t print duplicate footnote data even if it exists in data; fixed y-location of footnotes on last page of section.
2014-10-30 14:24:48 +00:00
Rich
818ebe20c3
Fixed bug when XOfffset was being calcuated.
2014-10-30 09:27:58 +00:00
7f8b048f8a
Print footnotes & separator lines for BGE Valve Sections
2014-10-29 14:44:22 +00:00
Rich
1c37a32d78
Restore Kathy's change that I stepped on.
2014-10-28 16:00:50 +00:00
Rich
74a8145f1d
Changed DBSequence to Short Path in debug output
2014-10-24 16:50:19 +00:00
9d2e558451
Calvert: CheckOffXtraLines’ support for new check off [6]; fix blank line adjustment for caution 6 in EOP/AOPs
2014-10-23 12:58:13 +00:00
Rich
6098140d26
Support the impact of the Section Continue Message on Pagination
...
Added logic to determine if the Section Continue Message would be printed.
2014-10-22 15:29:21 +00:00
91ef383ad4
‘INITIALS’ pagelist fix & extraneous end message fix
...
fixed various check off line lengths (underlines now are lines in macro)
Calvert: adjust paragraph widths if section has a check off
Calvert: determine whether ‘INITIALS’ pagelist item is printed based on whether section has check offs
2014-10-22 13:15:02 +00:00
6c564c8e4d
Section titles & section title continue messages improved
...
Calvert OP/STP: Improved section title continue message
Calvert OP/STP: Added a method to get tab width with no symbol font name as argument
2014-10-21 14:42:43 +00:00
f6a471dde8
Various print format improvements
...
Fix multiple note/caution bulletting
Improve check off lines (may need further improvement)
Fix multiple/note caution printing for Calvert Only
2014-10-16 15:59:48 +00:00
ba6eff87f4
BGE_STP: Implement ‘CheckOffHeaderInPagelist’ and ‘CheckOffXtraLines’ format flags
2014-10-16 12:51:07 +00:00
4ebc193d09
Eliminate Forced pagination problems in IP2 Bck
...
Resize figures when figure is bigger than page
Remove {NULLDOCCURPAGE} when processing page numbers
2014-10-14 13:39:52 +00:00
Rich
a4f0a04c5d
Added logic to speed-up printing
2014-10-09 18:22:53 +00:00
be96be3ecc
Was going through left tab adjust logic even though the adjustment for the current level was zero. This caused an extra space to be added in between the tab and the step text which shortened the step text width and cause different word wrapping. This happens only when the UseMetaSection flag is turned
2014-10-09 13:32:39 +00:00
d8b0f21619
IP2 Background: Fixes for bad pagination within Step Description table & width of some sub-steps
2014-10-08 16:37:28 +00:00
7a25579663
IP2 Background indenting in Step Description Table for non-template steps
2014-10-08 14:14:05 +00:00
ea01b9bf71
Logic for more control over indenting and underlining on Auto Table of Contents
...
Added logic to prevent multiple numbers (on top of each other) from printing on the AutoTableOfContents, added logic to support format defined section continue text, logic to support EndMessageOnEachSubSection, logic to repeat high level step text as part of a continue message
Logic to support DidFirstPageDocStyle flag, logic to support {SECTIONLEVELNUMBER} {SECTIONLEVELTITLE} on the same line of a pagelist item when the section title goes to more than one line.
2014-10-07 19:37:11 +00:00
f9d0c363f7
Support for ‘PaginateOnLowerStepLevel’ pagination flag (for IP2BCK)
...
IP2BCK: Step Description table’s title (Cont) support and various xoffset & margin fixes
IP2BCK: Support Step Descriptions table’s title (Cont) message
IP2BCK: Implement ‘NoTabAlign’ flag so that tab aligning won’t occur for EquipmentOpt step types
2014-10-03 13:44:46 +00:00
Rich
033e5e9122
Align centerd tables with CheckOffs
...
Fix PCPC Print Logic when the next step is not applicable
2014-09-29 16:17:17 +00:00
84f4153900
Add logic to determine if a section has one high level step and an end message to include the height of the end message when a section will not fit on a page.
...
When determining the Page Break location in a step, verify that the item before the page break will fit on the page
Add Error Log output if text is low on the page,
2014-09-26 15:39:31 +00:00
eac2037172
Consider whether an ‘End’ message is printed when determining page breaks
...
Added error log message ‘End Message LOW on page’, if the end message locates on the bottom line of page list box.
2014-09-25 16:38:03 +00:00
881cbe5bdd
Adjust HLS width (checklist header) and DocStyle:page length for pagination
...
Display message box after formats/genmacs are copied
Improve checklist pagination
Improve checklist pagination & right checklist box line alignment
2014-09-24 14:47:36 +00:00
Rich
4069371056
Added output to the DebugPagination file.
...
Changed the oage break logic to keep a substep with its cautions and notes.
2014-09-12 20:39:29 +00:00
Rich
8261a6bb55
Change a Property name (Prefix) to (PathPrefix)
...
Added generic Properties (Prefix and Suffix) for vlnParagraph
Changed Rtf to be lazy-loaded using new method BuildRtf
2014-09-05 14:29:20 +00:00
