8a96b47e72
F2019-042 turned off the automatic conversion of FORTRAN numbers (Ex. 2.0E-2” to “1.0x10-2”), F2019-043 AND will be automatically bolded and underlined, NO will no longer be automatically underlined F2019-044 add the <Proc Num>, <Sect Num>, Step <First Step> transition type and made transition list same across formats
...
F2019-042 turned off the automatic conversion of FORTRAN numbers (Ex. 2.0E-2” to “1.0x10-2”), F2019-044 add the <Proc Num>, <Sect Num>, Step <First Step> transition type and made transition list same across formats.
2019-05-08 20:51:17 +00:00
51962b5c31
F2019-041 restored the second level sub step tab to be a lowercased letter. F2019-042 turned off the automatic conversion of FORTRAN numbers (Ex. 2.0E-2” to “1.0x10-2”), F2019-043 AND will be automatically bolded and underlined, NO will no longer be automatically underlined
2019-05-08 20:50:09 +00:00
8a6e215241
F2019-036 Corrected the wrapping of the procedure title on the cover page, F2019-037 Corrected the wrapping of the procedure title in the page headers, F2019-038 The sub sections listed in the table of contents will now be indented, F2019-039 The first level section titles will be underlined when printed, F2019-040 the second level sequential sub steps will have only an uppercased letter.
2019-05-08 13:20:26 +00:00
8a0c20d60b
F2019-035 Added a transition with the format <Proc Num>, <Sec Num>, Step <First Step> (the step number is optional).
2019-05-07 19:52:46 +00:00
7d7d9cb42b
B2019-067 Added check for use of a proportional symbol font in the logic that will replace our symbol character with a WingDing font character (used for the Clock, Check Mark, and Heavy X symbols)
2019-05-07 14:11:39 +00:00
Kathy
27944c837d
B2019-017: Do not create enhanced step for an RNO
2019-05-07 12:59:47 +00:00
Rich
a0461e9a7a
Added functionality to the Import Word Content feature (Insert Ribbon in Debug Mode)
2019-05-06 18:24:02 +00:00
Rich
c973925790
Added Properties required for the Import of MSWord text.
2019-05-06 18:23:22 +00:00
Kathy
5f63a39299
C2019-020: fix typo in tooltip for Merge PDF
...
C2019-020: fix typo on Merged Output Settings button
2019-05-02 13:58:55 +00:00
Kathy
ff913f29f5
B2019-051: Summary of changes not resetting properly after new Approval revision
2019-05-02 12:18:36 +00:00
e5740d6a95
Created a Supplementary Attachment section format type that prints only the section title, does not print the Foldout on back pages, and does not have an end of section message (like the Purpose, Symptoms and Entry Conditions section type but the title is centered and it has the section page numbering) Also created a Non-Bolded Standard High Level Step type.
2019-05-01 18:37:22 +00:00
774ff846b3
Added a Check Mark and a Heavy X to the symbol list
2019-04-30 18:48:08 +00:00
0e7b5d25ac
B2019-063 Turned off the printing of foldout pages prior to the Revision Summary section.
2019-04-29 14:47:58 +00:00
536f7efb7e
B2018-152 Added a message box for case where user deletes all of the text in a step element, then selects one of its substeps. Added logic to handle the deleting of the that step if user selects YES from message box.
2019-04-26 15:07:52 +00:00
Kathy
cd3656c955
B2019-052: Pdf Links for each Referenced Object and Transition within a Step
2019-04-25 13:07:19 +00:00
456909e848
F2019-034 Turned off the SpecialStepsFoldout docstyle flag so that the lines of text do not appear compressed. Also adjusted the starting position of the first step and page length.
2019-04-24 14:03:41 +00:00
3da1b7192a
B2019-016 include RNO step type in the list of step types to search
2019-04-23 19:12:28 +00:00
550200acf6
B2019-023 Fixed case sensitive search in Word attachments
...
B2019-016 include RNO step type in the searchable list
2019-04-23 19:11:44 +00:00
31c744af4b
B2019-016 Set Searchable to True for RNO step type
2019-04-23 19:09:57 +00:00
Kathy
9d6ff32926
B2019-060: On procedure set import, could not import set with same (folder) name even though set had been deleted
2019-04-22 14:41:28 +00:00
c30518c4fe
F2019-033 Added Flag to position the top continue message at the left margin
...
F2019-033 Added flag to position top continue message at the left margin
F2019-033 Added logic to support format flag to position the top continue message at the left margin
2019-04-17 19:52:00 +00:00
644e289561
B2019-059 – replaced a hard coded 12 with SixLinesPerInch variable
...
B2019-059 – only one blank line after a figure
2019-04-17 17:59:20 +00:00
e803ec1cb2
B2019-037 added logic to replace ~ and # characters with superscript and subscript commands
2019-04-17 17:08:03 +00:00
0fccb2af79
B2019-037 added format flag to allow use of ~ # characters as token characters for superscript and subscript in RO return values
2019-04-17 17:07:14 +00:00
70692e9d77
B2019-037 added logic to replace ~ and # characters with superscript and subscript commands
2019-04-17 17:06:37 +00:00
b970920ee5
B2019-037 added format flag to allow use of ~ # characters as token characters for superscript and subscript in RO return values
2019-04-17 17:05:11 +00:00
99c5cfc6c6
B2019-037 added format flag to allow use of ~ # characters as token characters for superscript and subscript in RO return values. Initialized as False
2019-04-17 17:04:37 +00:00
45fef89e6a
F2019-032 Removed the section continued message.
2019-04-16 14:08:27 +00:00
5c93f04940
F2019-031 Adjusted the spitting of section titles when printed for attachment sections
2019-04-11 17:37:55 +00:00
40a7f674f1
F2019-030 Added end message to the Word attachment sections
2019-04-11 14:33:52 +00:00
c8b01d803c
B2019-057 The override width on sub-steps without tabs (i.e. paragraph) was being reset back to non-override value. Added logic to not do this if the step type has a width override set in the format.
2019-04-10 18:45:01 +00:00
23d3774cdf
F2019-026 Text for Cautions and Notes runs past the edge of the page border. Adjusted the width of the Cautions and Notes.
2019-04-10 18:44:27 +00:00
0824aee647
F2019-029 don’t do ReplaceWords in Tables. B2019-056 – Turn off MixedCautionsAndNotes so that we get proper bulleting on multiple Hold Points (Caution2 type)
2019-04-10 17:18:50 +00:00
Kathy
bbead6687d
B2019-046: Improve error handling for import
2019-04-10 13:56:58 +00:00
b3b98dacff
F2019-028 Turn off step compression
2019-04-10 12:42:35 +00:00
8dd8b95b7a
F2019-027 include section for oversized page sections in table of contents to be consistent with other word attachments
...
F2019-027 Add Table of Contents section type
F2019-027 Add Table of Contents section type to be consistent with two column format
2019-04-09 17:47:48 +00:00
fd21ef8e66
B2019-055 (re-fix of B2019039) Removed previous format change which caused issues entering hold points after a note
...
B2019-055 (re-fix of B2019039) added logic to check if previous note or caution have the same Type number in determining if the change bar should be extended from the previous change bar.
2019-04-09 15:58:55 +00:00
Kathy
169f6a276d
B2019-053: Inside section transitions without step number do not have PDF link
2019-04-05 12:18:02 +00:00
915264e6e8
B2019-039 – change bar extended from a Note through a Hold Point. Needed to set the OnlyBulletSameCautionNoteType format variable to true.
2019-04-04 17:16:21 +00:00
304860b7e2
B2019-054 Upon startup of PROMS, the initialization of ProcItem caused the list of PROMS databases to display.
2019-04-04 13:53:11 +00:00
917fda2bf5
B2019-038 Fixed issue where there was an extra blank line between a Note box and Hold Point box
...
Removed a duplicate Warning step type definition (that was not being used)
2019-04-03 18:55:37 +00:00
a2b10e0844
B2019-049 Added check for table in a Caution or Note to the TableLocation() logic
...
B2019-049 when printing a table that is inside a note or cation, use the single column setting of the TableCenterPos format value
2019-04-02 15:45:33 +00:00
Kathy
abb89cc757
B2019-048: fixed crashes on approval dialog
2019-04-01 13:22:19 +00:00
Kathy
5d6bfe1c45
C2019-009: Fix type of message box when doing Approve Procedure
...
C2019-014: Make Print Dialog consistent with Version Properties Dialog for duplex printing
2019-03-28 15:47:09 +00:00
Kathy
a9ad0ed12a
B2019-029: When a new annotation is created, unless you press save, it isn’t saved. The first fix caused a dialog to come up repeatedly for when save is selected. There is no longer a dialog and this was fixed with this update
2019-03-28 14:35:21 +00:00
389250bad3
B2019-044 Since the watermark switch on the print dialog can turn off the printing of a watermark, created a enum of the watermark options but without the “None’ option for use only on the Print dialog.
...
B2019-044 The watermark switch on the print dialog will now turn off the printing of a watermark when there is a default set at the working draft level.
2019-03-26 13:58:15 +00:00
676ebac6cd
F2019-025 Added transition options to reference the main (default) procedure body
...
F2019-024 Changed “AP1000 ERG Step” to “EOG STEP”. Changed font of section titles on the display to Arial 12pt
2019-03-25 16:04:05 +00:00
Kathy
8570148961
2019-03-25 14:12:11 +00:00
b29176f636
B2019-043 Added checks for being in design mode during initialization of variables
...
B2019-043 Added checks for being in design mode during initialization of variables. Also needed to remove the parameter from the constructor
2019-03-22 15:19:19 +00:00
94f18653eb
B2019-043 Added checks for being in design mode during initialization of variables. C2019-015 removed (hid) the Volian Web help menu option and place the About option as the last help menu option.
2019-03-22 15:16:44 +00:00
