9c464278f3
increase box length for procedures step box
2015-03-17 14:55:05 +00:00
086e73720c
missing box
...
docstyle messages: {par} consistent with code
docstyle messages: {par} consistent with code & missing box
Handle par in endmessage
Allow for more end message text length
Handle asterisk hls draws when steps are compressed
For RNO separator, if aer column is further down on page than rno, print rno separator off of aer (was causing separator to print beyond margin)
2015-03-16 13:54:18 +00:00
6c657832a2
Fixed the index number of the last two transition definitions
2015-03-12 18:09:37 +00:00
Rich
6211f03118
Westinghouse Footer for Purpose and Symptoms set to 42 to align at 6 Lines per inch
2015-03-12 14:48:17 +00:00
Rich
79adb37f12
Adjusted the horizontal location of the checkbox by one character (6 points) so that the box surrounding the note will not overlap the checkbox.
2015-03-11 12:36:27 +00:00
3f81f9477c
change {par} to {\par}
2015-03-11 11:10:15 +00:00
1a08f7410a
Adjusted the adjustment for the first level sub-section title length
2015-03-06 16:50:18 +00:00
2c0a9d9804
use docstyle/Continue/Top/UseStepTabs flag
...
define docstyle/Continue/Top/UseStepTabs flag
2015-03-06 13:30:27 +00:00
53b5f7ae54
adjust column widths for 2 column procedures; flag page number transitions
...
remove parpar in end message
adjust page length for procedure steps for pagination improvements
2015-03-02 16:00:43 +00:00
cd9008227a
fixed typo that prevented format from loading
2015-03-02 15:37:21 +00:00
18bc3ea263
All tables set to Lucida Console font
2015-03-02 15:15:59 +00:00
Rich
e66f44a8d9
Had to reduce the Page Length to 612 from 636 points (72/inch) so that OP-3 Would paginate properly.
2015-02-27 20:51:59 +00:00
763eb1865b
for Rodata, do not change case of units
...
for Rodata, do not change case of units, except uppercase after dash
adjust section separator line y-location
2015-02-27 13:15:31 +00:00
5f8c27367f
Increased the page length in the "Attachment Step - Continuous Steps" section to fix a pagination difference.
2015-02-26 16:49:19 +00:00
beac05011e
Single Col Section types now say “Operator Actions” and have a blank line after it. Added a “Single Column Procedure Steps – Last Sub-Section” which will print an end message that includes the procedure number. Added a new transition type that puts the Section Number, a space, then the Section Title. This is used for sections that have a section number with a period. The other transition types puts a comma between the section number and section title, resulting in a period followed by a comma.
2015-02-25 15:40:45 +00:00
63ca6242b1
center the sub-headers (Caution1)
...
print sub-headers for Calvert’s valve format
2015-02-25 14:24:22 +00:00
f2dbaa0061
Move the change bar one character position to the right
...
Increased the width of the page box (boarder) that is used in single column step sections a smudge to make room for the new change bar position.
2015-02-24 20:41:04 +00:00
068dbfc005
increased the width of the page box that is used on the FSG attachments so that the check boxes are inside the page boarder
2015-02-24 15:36:10 +00:00
577597fa54
Increased the page length of the procedure steps sections to fix a pagination/compression issue.
2015-02-20 21:06:05 +00:00
Rich
0e50de5f44
Transition User interface for {Step}{Other Procedure}
2015-02-19 22:15:59 +00:00
4b484b3a85
Adjusted the default change bar to the right
2015-02-18 14:53:14 +00:00
bd72c82eb4
Adjusted the position of the change bar and fixed the positioning of the Step tab on the printed page for high level steps, cautions and notes.
2015-02-16 19:42:00 +00:00
0d42827308
Add ‘SkipNonSeqTabWithPar’ to StepSectionData for inclusion of parent tab in current tab when intermediate non-sequential steps exist (default = “False”)
...
Add word ‘Step’ before step number in last transition. (request from customer) and use SkipNonSeqTabWithPar = “True”
2015-02-13 14:37:33 +00:00
e0cd24b61d
New format to support Ginna’s FSG procedures
2015-02-06 20:34:16 +00:00
6e7e41493c
changed “Comanche Peak Steam Electric Station” to “Comanche Peak Nuclear Power Plant”, aligned the headers and boxes so that they are all in a consistent location on the page.
2015-02-06 19:00:28 +00:00
428810c11e
New deviation format that includes “Attachment 1” in the page header
...
Moved the change bar position over to the right to get it off of the page boarder
Added a “Attachment Pages (Word)” section type, changed CPSGS to CPNPP in the page headers, added ” Information Use” to the bottom of the procedure step pages (not on the new attachment section), put the “R-8” below the “Page 3 of 3”
2015-02-06 18:59:56 +00:00
0f9706cbfc
New deviation format that includes “Attachment 1” in the page header.
2015-02-06 18:58:40 +00:00
56816c2cba
Added Two Column Attachments and One Column Attachments step editor section types
2015-02-03 19:51:49 +00:00
e0b21fa4a2
added AllowNoteCautionAdd to the step section layout
2015-02-02 17:12:09 +00:00
3dc4827fd4
Add DontResetIndentOnNewline
2015-01-16 14:58:20 +00:00
9ce6c8c2b5
removed commented out line
2015-01-07 17:43:26 +00:00
a2586a851f
Moved the starting position for pages other than the first page down a half line so that change bars on the first item of the second, third, etc. pages do not run into the page number at the top of the page.
...
Fixed Change Bar location set, page widths and lengths adjustments, section title wrapping fix, page boarder positioning
2015-01-07 17:40:33 +00:00
1541cc4f13
fix text width when meta section level is 2; fix font & underlining of Checkoff header
2015-01-06 14:18:43 +00:00
7145beac7b
Added CautionNoteOrder
2014-12-12 17:05:24 +00:00
4ea481e430
Set the NumberingSequence to 11 (WithinEachSectionNumber) in the Attachment-SubSections document style
...
Set the NumberingSequence to 11 (WithinEachSectionNumber) in the Valve List document style
Added a new NumberingSequence 11 – WithinEachSectionNumber which will continue the page numbering across sections that have the same Section Number and are set to print continuous.
Added logic to support the WithinEachSectionNumber NumberingSequence type
2014-12-11 19:32:39 +00:00
428a6241d5
Make pagelist items landscape (& locate appropriately) for the landscape attachment document style
2014-12-10 15:56:16 +00:00
7c56a096ea
Move the change bar to the right a little bit
2014-11-18 16:16:14 +00:00
85a8a26504
added Docstyle format flag DSS_WordContentLandscaped to flag that Word content is landscaped
...
don’t change level for steps under sequentials (only under notes/cautions/equipment lists)
use Docstyle format flag DSS_WordContentLandscaped to make End message landscaped
2014-11-18 15:12:23 +00:00
443dc9adaf
Restored a prior update that was stepped on. – added 4 spaces to the tab of the Fixed Paragraph type
2014-11-14 21:04:56 +00:00
bcc0ec5a3b
force alignment of ‘Unnumbered High Level Step’ with section text
...
Calvert: force alignment of ‘Unnumbered High Level Step’ with section text
2014-11-12 15:17:17 +00:00
Rich
5beee972f0
Replaced Initials as text with {Initials} as token.
2014-11-12 06:39:56 +00:00
1be86ef960
Added a 4 space blank tab to the Fixed Paragraph substep type
2014-11-11 17:48:04 +00:00
5cc512234e
RNO xoffset
...
RNO xoffset & “Improved Box with Paragraph” printing
“Improved Box with Paragraph” box location
fix possible null reference for determining auto indent of meta-sections
Calvert: using format flag IdentWidth in defining tab width if it is set in format file
2014-11-11 15:45:11 +00:00
80315d2657
Added EndMessageOnEachSubSection flag
2014-11-11 14:26:26 +00:00
Rich
242514ae99
Fixed Transition Format to support multiple level sub-sections
2014-11-10 13:04:41 +00:00
72a03590dd
Added the “AllowNoteCautionAdd” flag to the StpSectLayData, and set the Section Caution, Section Note, and Section Warning inactive
...
Set the Section Caution, Section Note, and Section Warning inactive
2014-11-07 17:26:36 +00:00
b52c7098f9
Reverted the first transition type back to not allowing the user to select a section
...
Fixed the transition logic so that the first transition type can be when the procedure you are transiting to does not have a default section named “Procedure Steps”.
2014-11-06 20:59:22 +00:00
fd6e80ef71
Adjusted the positioning of some of the signoffs so they don’t bump into change bars
2014-11-06 17:04:19 +00:00
235b6f7472
Added Print/HorizontalSubstep flag (default to false). Was in 16bit to flag footnotes for BGEVL (in addition to NotesToFootnotes
...
Set HorizontalSubstep flag to true (for Note type as footnote)
Added property ‘IsFootnote’; for Calvert formats: don’t bullet a single note/caution
Added HorizontalSubstep flag
Use ‘IsFootnote’ property to determine if a note is a footnote.
2014-11-06 14:30:40 +00:00
Rich
e77c7dfc2c
Added Unit configuration Flag so that the user can specify the unit for a Working Draft set.
2014-11-06 02:47:59 +00:00
