35b4a336d6
Closed F2018-040. Found internally that the notes and cautions weren’t printing to the right margin. The Purpose text was also not printing to the margin when with a note or caution.
2018-08-24 18:36:31 +00:00
fefa774b12
F2018-039: Ginna – add section number to tab in backgrounds
2018-08-23 15:27:14 +00:00
9067c3c55d
F2018-038: WCNSAMG sub-format font is different for “First Level Sequential”
2018-08-14 13:18:20 +00:00
ff2b4c5e85
F2018-035 Created a sub format to WCNSAMG for the data entry of the Purpose, Symptom and Entry text in the SAMGs. The sequential sub steps at all levels are numbered and the first three levels include its parent tab number. .A sub step type called “First Level Sequential” was created which will align the sub step tab with the high level step tab
2018-08-10 14:34:09 +00:00
59946e12b3
B2018-110: continue message overwriting text in WCN background documents (change UseSmartTemplate to UseOldTemplate)
2018-08-08 14:18:24 +00:00
776671b40a
F2018-036 Initial check-in of the Wolf Creek SAMG Background format
2018-08-07 17:55:42 +00:00
Rich
234b6561f9
MNS - C2018-024 I in Arial font changed to I in TimesNewRoman for Step Tabs and Transitions
2018-08-07 14:45:54 +00:00
e14f037e8d
Wolf creek FSG background format
2018-07-24 12:02:34 +00:00
c598002470
B2018-102 various format changes
2018-07-24 12:01:30 +00:00
a6a9305f7d
C0218-022: If tab is too long, move text xoffset over for SAMG Supplemental Info (default flag to false)
2018-07-20 15:22:27 +00:00
d039ec8989
In the FNPSAM1 format header boxes, the word “Version” has been changed to “Revision” and on the landscape word sections, “REV” has been changed to “VER”. The old cover page was not changed.
2018-07-18 19:35:54 +00:00
05396b6b86
B2018-098 adjust the symbol bullet (use VESymbFix instead of FreeMono)
2018-06-21 15:12:53 +00:00
e258e7b3dc
B2018-068 was closed by KBR, but the ComPeakFlex11 format needed the LandscapePSIFlag added. Didn’t add to the other formats – will do that as requested due to this section type not being used often.
...
Closes F2018-031 for the title on the procedure steps section of Flex data format (CPFData) overwriting the GUIDELINE NAME text.
2018-06-12 14:22:39 +00:00
128c3c6685
F2018-029 Turned off step compression
2018-05-25 14:31:41 +00:00
89f046e792
Code cleanup – removed unused format setting
...
B2018-079 Calvert pagination fix. Don’t need to count phone list length when calculating space on the page. Phone list is printed below the footer and defined page length.
2018-05-18 19:22:57 +00:00
7c6f304957
Closes F2018-030. The word “Attachment” will now need manually entered as part of the section number field for the Attachments and Attachments (Columns) section type. Long section titles in the Attachments (Columns) will now print within the page border.
2018-05-18 13:41:56 +00:00
e5b47deb38
Added pagelist items to print the Effective Date on the ECC and Small Stamp cover page section types. Modified the SAMG Cover Page section type to remove the empty box beneath the header. Not released to customer yet. Part of F2018-027.
2018-05-09 20:06:43 +00:00
b8d9de399c
B2018-073 Adjusted the format setting for the printed title length so that it wraps properly in the page header of the deviation step pages.
2018-05-09 15:48:27 +00:00
e5e2fb777e
The genmac files that go with the format updates previously put on for F2018-027. Adjusted positioning of SRI PSI text and info in header boxes.
...
Part of F2018-027. Header box information better centered.
2018-05-08 12:45:23 +00:00
e4a99e09cf
F2018-027 Part 2 of 2. Removed the words “Steam Electric” and “Format” from the format titles. Added the ability to insert substeps off of Notes. Added PSI for the security line to all pages in the formats (except ComPeakFlex where it was not needed). Modified existing PSI so that it better aligns on the cover page types.
2018-05-07 14:56:55 +00:00
836967d1f1
The word “Format” was removed from the end of the format titles and if the title included the words “Steam Electric Station,” they were removed.
...
The ability to insert Notes off of substeps has been added.
Procedure Specific Information (PSI) has been modified to include a field for security information at the top of the page for each section type listed below, as well as existing PSI being better positioned/centered on the page.
The changes apply to the following formats unless noted:
- ComPeakFlex11
- ComPeakFlex (no security PSI information was added)
- TUECSAMG
- TUECSAMG1
- TUEC
2018-05-07 13:32:51 +00:00
02d51c4fc8
F2018-027 Removed "Format" from the title
...
F2018-027 Removed "Format" from the title and replaced with "(Unused)"
2018-05-04 18:49:36 +00:00
b2d714e584
F2018-028 Added the DoDevDate flag
2018-04-26 15:54:49 +00:00
Rich
2b8e75735d
Use the default step numbering for substeps
...
Changed the sequential step numering to alternate between numeric and alphabetic for substep level
2018-04-19 14:04:57 +00:00
c93cee7f20
Remove the underline property for high level step type 50 (Step with.0)
2018-04-11 19:43:48 +00:00
08c394f5e8
Verified the PSI was correct for each format (EOP/AOP format says EOP/AOP PSI and SAMG format says SAMG PSI)
2018-04-03 14:26:17 +00:00
d7ad09b4b7
Additional changes from Jim Lambert after he reviewed samples and modification after internal review. Continuation of F2018-024.
...
- Added multi-line procedure titles
- Made Safety/Non-Safety Related a PSI field
- Bolded procedure number, title and the SAMG line on the SAMG cover page
(continued for F2018-024)
2018-04-02 15:40:59 +00:00
90110b4a23
Closes F2018-024 request from Jim Lambert for a new SAMG cover page and a new EOP/AOP cover page. Samples were sent to Jim and approved by him, as well as the information on how to insert the logo and Guidance Block for the SAMG cover page and that he will need to create library documents for the word sections.
2018-03-29 13:37:24 +00:00
0ca73a5eae
F2018-023 added a transition “{Sec Num} Step {First Step} ( To a different section )”
2018-03-22 18:10:25 +00:00
a99e5f1fef
A "Step with .0" high level step type was added, using the AppendDotZero step type flag.
2018-03-21 17:11:40 +00:00
d4beb72fa8
Closes F2018-017 – SAMG format with supplemental facing pages and landscape header attachments. This format was based on the Catawba SAMG format.
2018-03-20 19:38:12 +00:00
e6938f6b32
Adjusted the header text to accommodate for two line procedure titles in the landscape section attachments.
2018-03-20 19:22:46 +00:00
bea96c9833
F2017-062 Added template for enhanced backgrounds
2018-03-20 18:02:11 +00:00
d0c2901597
This is part of F2018-021. Needed to adjust the centering of the line that contains the text “SEVERE ACCIDENT MANAGEMENT GUIDELINES” when it was changed from Mitigation Guidance
2018-03-19 15:36:51 +00:00
0680a28946
Closes F2018-021 customer request to change Mitigation Guidance to Management Guidelines on the cover pages in CPSAMGDATA, TUECSAMG and TUECSAMG1
2018-03-16 17:50:48 +00:00
c95dc74a89
2018-03-16 17:30:41 +00:00
bd862bd9ac
F2018-019 Created a short form deviation format
2018-03-16 16:20:33 +00:00
76120ce731
The Catawba SAMG with supplemental info format has been added. This format also includes a section type for landscape sections with the landscape header and a landscape section type with a header for 11 x 17 sections. Closes F2018-018.
2018-03-16 15:27:26 +00:00
Rich
2f7578900b
F2018-003 Copied Replace Words for logic terms from WCN1 (single column) since SAMGs with facing pages are single column.
2018-03-15 18:58:29 +00:00
d5c8e1ae7e
F2018-020 Added the "No Header Word Accessory Pages - Separate Page Numbers" and the "Word Attachments - Separate Page Numbers" docstyles.
2018-03-08 16:57:25 +00:00
38f005f9c2
Added two landscape section Word attachments with landscape headers. One is for 11 x 17 only.
2018-03-06 12:40:56 +00:00
09aa4e4ab0
B2018-042 the property class was not printing on all of the pages it needed to be
...
B2018-041 Setpoints were not being uppercased when they followed a dash character
2018-03-02 16:59:27 +00:00
7df2535d78
F2018-015 Move the diamond step designator (Continuous Action step type) to the left so that two digit step numbers will fit inside it.
2018-02-23 16:32:07 +00:00
df4f1b7cc7
B2018-040 the End message was printing inside a table and other tables were printing past the bottom page boarder. This was due to the default bullet size was one point size too big. When the bullet symbol was used in tables, the table sizes grew to where tables that once fitted on a page started to overflow the bottom page boarder. Found testing Callway Flex / TSG-4/ Section C . Step C6.
2018-02-22 21:16:27 +00:00
ec48e1ec9f
Formats\fmtall:
...
EXESAMall.xml
Formats\genmacall:
exesam.svg
Internal Release:
Closes F2018-012 landscape header attachment for 11 x 17 that prints the header across the entire top of the page
2018-02-22 21:06:42 +00:00
Rich
33976e8d2b
set the default Font and Size for bullets
...
Changed the function the replaces symbols to be able to be used for tabs.
Used the function that replaces symbols so that it is used for tabs.
2018-02-21 16:53:37 +00:00
Rich
2da62a43b8
Eliminate the footer to increase printable space on the page.
2018-02-21 15:57:06 +00:00
d257fbe856
B2018-027 In the Wolf Creek SAMG format, change bars on tables were printing inside the tables instead of in the right margin (for single column procedures)
2018-02-19 15:18:01 +00:00
de0d787fa1
The page headings in the Robinson AOP Enhanced Background Non-Linked Styles format have been updated to align with the page headings in the Robinson AOP Enhanced Background format.
2018-02-16 13:49:10 +00:00
cd9bb3984c
The RNPAOPBCK format has been modified so that 11 pt Arial font is used and page header information is consistent. Removed proctitle2 from printing in the headers, adjusted all fonts to Arial and made 11 except for BASIS DOCUMENT text, changed right margin in the General Text section so it doesn't print off the page if hard returns aren't used, adjusted positioning of header information so that it's centered. F2018-014 still open for RNPAOPBCK2 work that I had trouble with.
2018-02-15 14:33:52 +00:00
