0ed174d0da
F2022-023 Get the correct level to use the WidsAdjByLevel to adjust the step text width when sub-sections are used. This prevents the step text from printing into the right column
2022-05-02 13:12:44 +00:00
264e7b47ff
B2022-042: double Caution followed by Critical Step missing bullet
...
F2022-010: substeps in multiple notes, cautions, warning print differently
2022-03-22 15:17:37 +00:00
adc8617aa1
B2022-027: Barakah – blank line not printing after list within another list when in caution/note
2022-03-02 14:59:09 +00:00
1b7bb16e6d
C2021-015: High Level Steps in Table of Contents
...
C2021-015: Barakah High Level Steps in Table of Contents
2022-02-23 14:46:04 +00:00
e9ade37861
B2022-017: sub-step of note does not print blank line between note text & sub-step
2022-01-25 16:53:01 +00:00
43a1df66d0
B2022-002: BNPP1new - Step and section text printing into the INITIAL column
2022-01-12 15:29:45 +00:00
653a504234
B2022-003: BNPPalr - line spacing inconsistency between Explicit And & sub-steps
2022-01-06 16:42:01 +00:00
4522b2a636
B2021-133 indent of HLS & subsection should be the same
...
B2021-133 BNPP1new indent of HLS & subsection should be the same
2021-12-07 15:26:07 +00:00
5b237a893f
B2021-138 Top continue message missing sub-step tab
...
B2021-138 BNPP1new -Top continue message missing sub-step tab
2021-12-01 16:46:04 +00:00
1f8be43773
F2021-060 Do not remove blank line between step and Caution, Note or Warning below it (Caution, Note, Warning are off 1st sub step)
...
B2021-118: On cover page, if procedure title is 3 lines it prints over Revision Number
F2021-060 Add double lines for Warning box; B2021-120 Second Bulleted Sub-step type with empty bullet & remove dashed step type
2021-10-18 11:29:39 +00:00
3d80cf5832
C2021-049: Caution, Notes & Warnings with sub-steps should have no blank line between text & bottom box in BNPP1 & BNPPalr
2021-10-05 14:17:30 +00:00
687becbffc
B2021-106 added check if section/subsection has caution/notes in deciding where the checkoff header is printed.
2021-10-05 13:47:46 +00:00
c0d8d17a91
F2021-042: BNPP1 Order of Notes, Cautions, Warnings, etc
2021-09-30 13:32:45 +00:00
b3ff49c635
F2021-026: Double thick line box around Warning Message
...
F2021-025: Remove blank line between last Note/Caution/Warning & bottom box
F2021-033: No blank line between HLS and its first sub-step and fix sub-step tabs
Add format flags for Barakah (F2021-026, 025 & 033)
F2021-026: Draw double thick line box (for Barakah)
F2021-025: Remove blank line between last Note/Caution/Warning & bottom box (BNPP1)
2021-09-16 11:37:41 +00:00
84c8442c66
B2021-091 Fix a null a reference error in Print. Optimize the check for printable Annotations.
2021-08-27 17:59:35 +00:00
c40f58f572
B2021-087 & B2021-085: Crash on print/approval caused by null reference on no bullet printing for WCN
2021-08-26 10:51:16 +00:00
85c4f9694d
C2019-044 Added RowOverride toTop Continue Message to allow us to place the top continue message on the same row as the checkoff header
...
C2019-044 Use the value of RowOverride to place the top continue message on the same row as the checkoff header
2021-08-05 13:23:48 +00:00
8899967a8e
F2019-069: Hold Point designator for Barakah (add Step’s DefaultText attribute)
2021-07-15 13:07:48 +00:00
d944fd635a
C2021-024: Wolf Creek Top/Bottom continue message, do not include bullet and bullet or bullet followed by sub-steps in tab
...
C2021-024: Top/Bottom continue message, do not include bullet and bullet or bullet followed by sub-steps in tab
2021-04-26 13:46:15 +00:00
cf126fe4ce
B2021-027 Catawba – AER steps that do not have Cautions or Notes above it, but do have an RNO with Cautions or Notes, was not aligned properly.
2021-03-03 14:26:51 +00:00
b679829508
C2021-010: Print using standard pagination rules by removing trailing hard returns, spaces & manual page breaks
2021-02-23 14:51:49 +00:00
7100163f8e
B2020-166 – Calvert pagination fix for OI procedures. First step of a sub-section (set to separate pagination) started printed more than half way down the page.
2020-12-10 13:28:46 +00:00
c67009c502
B2020-164 Logic was causing a numeric substep to split over a page in a Calvert STP procedure. Added a check for the SpecialCaseCalvert flag to fix this bug
2020-12-04 20:37:40 +00:00
4eaa2b0e1c
B2020-163 Calvert section header breaking from HLS caused forced pagination
2020-12-04 15:17:21 +00:00
28ad19953e
B2020-162 Blank High Level Step breaking from table in Single Column Procedures
2020-12-03 21:56:23 +00:00
9b724d17ac
B2020-161 Not all centered tables were properly centering. Needed to add logic to account for the use of a checkoff header. This was needed for tables that where approaching the defined width of the page.
2020-12-03 20:09:44 +00:00
b2419c1f5c
B2020-160 Calvert Forced Pagination fix. Logic to help keep RNO Note header on the same page as the note text and corresponding AER text.
2020-12-02 20:39:29 +00:00
867281200d
B2020-154: Incorrect top continue message tab in RNO column if for substep with a Caution/Note
...
B2020-154: Incorrect top continue message tab in RNO column if for substep with a Caution/Note (2nd fix)
2020-11-19 17:15:03 +00:00
1e4c42a9f5
B2020-151 – Calvert pagination fix. Keep OR substep together. Working Draft folder, :Unit 1 Operating Procedures, OP-3, section 6.1, step A.7
2020-11-18 17:20:36 +00:00
afcfe40136
B2020-154: Incorrect top continue message tab in RNO column if for substep with a Caution/Note
2020-11-18 17:08:46 +00:00
b0c6ecdde1
Corrected issue of un-needed extra information appearing in baseline meta file for the Calvert Alarms. A pagination fix that was put on for Westinghouse (B2020-047) cause extra (not needed) information in the baseline meta file for Calvert Alarms. Un-doing that change corrected the Calvert Alarm baseline meta file and the pagination bug (B2020-047) is still fixed as it appears on other pagination fix had corrected the Westinghouse issue.
2020-11-09 19:46:53 +00:00
314f695990
B2020-133 When printing an EOP with the PDF Links option needed to add a check for a null reference when trying to add a link to an enhanced document step that does not exist.
2020-10-14 13:36:35 +00:00
8ede560ac6
F2020-023: Include substep levels in top & bottom continue message
...
F2020-023: Include substep levels in top & bottom continue message (don’t duplicate parent tab)
2020-09-30 13:22:51 +00:00
de8c535db9
B2020-128: Pagination of a complicated AER/RNO may overwrite bottom continue message
2020-09-17 14:46:45 +00:00
1136071e14
B2020-116: Pagination of WCN single column
2020-09-16 13:48:08 +00:00
377788c314
B2020-121: pagination/location of BGE Alarms, Condition Response Caution/Notes
2020-09-14 13:14:54 +00:00
a4395852b6
B2020-112: Pagination of complicated AER/RNO
...
B2020-123: Missing section continue message for Calvert OI & STP
2020-09-03 16:50:54 +00:00
72355db893
B2020-117 fix for multiple Notes, Cautions, and Warnings in the Calvert Cliffs Condition Response column, fixed the bullets printing on the text, also removed extra blank line between them
2020-08-28 20:53:28 +00:00
Rich
d8f41f3dcb
vlnParagraph.cs
...
• B2020-115 Create Static properties for vlnParagraph to limit
the size of a figure and paginate large figures properly onto
their own page.
• B2020-115 Limit the figure size to the space available in a
page.
• B2020-115 Set a very large figure's Step Level so that
pagination will happen prior to the figure.
2020-08-18 12:23:45 +00:00
8d9d19db7d
B2020-059 – the 1st AER sub-step was printing on the HLS text when the last table in the RNO was compressed. (Barakah data)
2020-04-24 13:12:19 +00:00
9bea938777
B2020-047 forced pagination causing single step part to print on a page all by itself. Westinghouse house data BDS-101 Attachment 1
2020-04-01 20:27:09 +00:00
58a878da9d
B2020-031: Supplemental information print has extra blank page
2020-03-20 12:27:32 +00:00
f3b7903292
B2020-026: FNP - overlap of caution/note box
2020-03-03 15:43:30 +00:00
b41320ed24
C2020-002 Logic to use either the Letter or A4 paper size
2020-02-14 17:16:28 +00:00
cb5a88ea6f
B2020-013 Added check for second RNO that will fit on the page
...
Corrected Debug message for Leading so 7lpi is factored in
B2020-014 Corrected 7lpi print of tables so that they shrink properly
2020-01-29 17:46:07 +00:00
27b3ce2ff2
B2020-008: Second page of Alarm format prints over part of header
2020-01-22 13:17:03 +00:00
3f695a95a4
B2020-0001 Catawba/McGuire when paginated on a section (set to continuous) the extra line before the section title was printed at the top of page. We now remove that extra line for this pagination case.
2020-01-08 15:25:59 +00:00
cfb847de9c
C2019-042 Added a check box to identify a section as being a foldout – used in with printing in duplex
...
C2019-042 use new format config setting to check if sections are foldouts
C2019-042 use new format config setting to check if sections are foldout
B2019-134 code cleanup, discovered we were missing a “break;” statement in processing folder specific information
2019-11-06 20:50:29 +00:00
61ef1d4b40
C2019-040 added a format flag to adjust text width when a checkoff is used but not a checkoff header.
...
C2019-040 added a format flag to existing logic that will adjust text width when a checkoff is used on at least one step element, but a checkoff header is not being used
2019-10-30 15:08:54 +00:00
fdb6949c6d
B2019-141: Set width for steps whose parent is TextWithTitleRight
2019-10-02 16:12:57 +00:00
