Commit for development environment setup

PROMS/ReferencedObjectsOld/Exe/RefObj/CmpRpt/AssemblyInfo.cs

@@ -0,0 +1,55 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//

PROMS/ReferencedObjectsOld/Exe/RefObj/CmpRpt/AssemblyInfo.cs.bak

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("E:\\proms.net\\Public Key\\vlnkey.snk")]
+[assembly: AssemblyKeyName("")]

PROMS/ReferencedObjectsOld/Exe/RefObj/CmpRpt/CmpRpt.cs

@@ -0,0 +1,206 @@
+/*********************************************************************************************
+ * Copyright 2002 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: CmpRpt.cs $     $Revision: 3 $
+ * $Author: Jsj $   $Date: 6/08/05 4:31p $
+ *
+ * $History: CmpRpt.cs $
+ * 
+ * *****************  Version 3  *****************
+ * User: Jsj          Date: 6/08/05    Time: 4:31p
+ * Updated in $/EXE/RefObj/CmpRpt
+ * cleanup
+ * 
+ * *****************  Version 2  *****************
+ * User: Jsj          Date: 1/08/04    Time: 2:51p
+ * Updated in $/EXE/RefObj/CmpRpt
+ * constructor of  RODB() class changed
+ * 
+ * *****************  Version 1  *****************
+ * User: Kathy        Date: 11/11/02   Time: 7:17a
+ * Created in $/EXE/RefObj/CmpRpt
+ *********************************************************************************************/
+using System;
+using System.Drawing;
+using System.Collections;
+using System.ComponentModel;
+using System.Windows.Forms;
+using System.IO;
+using System.Data;
+using RODBInterface;
+
+
+// CmpRpt reads data for the RO database and puts the data into the
+// temporary file, 'print.tmp'. After this, it is sorted and printed.
+namespace CmpRpt
+{
+	// Form1 just acts as the container for this app.
+	public class Form1 : System.Windows.Forms.Form
+	{
+		/// <summary>
+		/// Required designer variable.
+		/// </summary>
+		private System.ComponentModel.Container components = null;
+
+		public Form1()
+		{
+			//
+			// Required for Windows Form Designer support
+			//
+			InitializeComponent();
+
+		}
+
+		/// <summary>
+		/// Clean up any resources being used.
+		/// </summary>
+		protected override void Dispose( bool disposing )
+		{
+			if( disposing )
+			{
+				if (components != null) 
+				{
+					components.Dispose();
+				}
+			}
+			base.Dispose( disposing );
+		}
+
+		#region Windows Form Designer generated code
+		/// <summary>
+		/// Required method for Designer support - do not modify
+		/// the contents of this method with the code editor.
+		/// </summary>
+		private void InitializeComponent()
+		{
+			// 
+			// Form1
+			// 
+			this.AutoScaleBaseSize = new System.Drawing.Size(5, 13);
+			this.ClientSize = new System.Drawing.Size(292, 273);
+			this.Name = "Form1";
+			this.Text = "Form1";
+
+		}
+		#endregion
+
+		/// <summary>
+		/// The main entry point for the application.
+		/// </summary>
+		[STAThread]
+		static void Main(string[] args) 
+		{
+			bool success;
+			VlnXmlElement rootXml;
+			VlnXmlDocument myroXmlDoc;
+			string recid=null;
+			string tbl=null;
+			RODB myrodb=null;
+
+			// the next two lists contain group headers for the reports.
+			ArrayList headers = new ArrayList();
+			ArrayList reversehdrs = new ArrayList();
+
+			if (args.Length <= 0) return;
+			// if an RO directory path was passed in, then change the
+			// current working directory to it.
+			// this path will also be used to generate a connection string
+			// for the Access database.
+			if (args.Length == 2)
+			{
+//				MessageBox.Show(args[1],"args[1]");
+				string path = args[0];
+				Directory.SetCurrentDirectory(path);
+				tbl = args[1].Substring(0,4);
+				recid = args[1].Substring(4,8);
+//				myrodb = new RODB(path);
+			}
+			else
+			{
+				tbl = args[0].Substring(0,4);
+				recid = args[0].Substring(4,8);
+//				myrodb = new RODB(Directory.GetCurrentDirectory());
+			}
+			myrodb = new RODB(Directory.GetCurrentDirectory());
+			VlnXmlElement rptele=null;
+
+			// Add the root to the tree
+			myroXmlDoc = myrodb.RODB_GetRoot();
+			rootXml = (VlnXmlElement) myroXmlDoc.FirstChild;
+			success = myrodb.RODB_GetRootGroups(rootXml);
+			if (success == false) return;
+
+			// if the table & recid = all zeros, we have a request
+			// for all ROs, otherwise it's a request for specific RO(s)
+			if (tbl == "0000" && recid == "00000000")
+			{
+				// the report element becomes the root.
+				rptele = rootXml;
+			}
+			else
+			{
+				// from the input tbl string, get a table name.
+				int itbl = System.Convert.ToInt32(tbl,16);
+				string stbl = System.Convert.ToString(itbl,10);
+				string pstbl = stbl.PadLeft(6,'0');
+				string tbname = "RO" + pstbl;
+
+				// read in this element from the table.
+				rptele = myrodb.RODB_ReadRO(tbname, recid);
+
+				VlnXmlElement parent;
+				string parentid;
+				parentid = rptele.GetAttribute("ParentID");
+				string rpteleParentid = parentid;
+
+				// walk up tree to get the path through the tree.
+				VlnXmlElement child = rptele;
+				while (parentid != null && parentid != "00000000")
+				{
+					parent = myrodb.RODB_ReadRO(tbname, parentid);
+					if (parent != null)
+					{
+						parentid = parent.GetAttribute("ParentID");
+						if (parentid == "00000000") 
+						{
+							reversehdrs.Add(parent.InnerText);
+							break;
+						}
+						parent.AppendChild(child);
+						child = parent;
+						reversehdrs.Add(parent.GetAttribute("MenuTitle"));
+					}
+					else
+						parentid = null;
+				}
+				
+				// Now hook this into the top part of tree by looking at the table
+				// names.  
+				VlnXmlElement group = (VlnXmlElement) rootXml.FirstChild;
+				while (group != null)
+				{	
+					string curtbname = group.GetAttribute("Table");
+					// hook it in here.
+					if (curtbname == tbname)
+					{
+						if (rpteleParentid != "00000000")
+							group.AppendChild(child);
+						else    // if this is a top group, just reset rept ele
+							rptele = group;
+						break;
+					}
+					group = (VlnXmlElement) group.NextSibling;
+				}
+				// Set up the headers array, it's in reverse order since we walked
+				// up the tree, not down.
+				int cnt = reversehdrs.Count;
+				for (int i=cnt-1; i>=0; i--)
+					headers.Add(reversehdrs[i]);
+			}
+			
+			rptele.Show(myrodb,headers);
+
+		}
+	}
+}

PROMS/ReferencedObjectsOld/Exe/RefObj/CmpRpt/CmpRpt.csproj

@@ -0,0 +1,147 @@
+<VisualStudioProject>
+    <CSHARP
+        ProjectType = "Local"
+        ProductVersion = "7.10.3077"
+        SchemaVersion = "2.0"
+        ProjectGuid = "{C4293263-EA9C-11D6-8515-00A0CC271352}"
+    >
+        <Build>
+            <Settings
+                ApplicationIcon = "App.ico"
+                AssemblyKeyContainerName = ""
+                AssemblyName = "CmpRpt"
+                AssemblyOriginatorKeyFile = ""
+                DefaultClientScript = "JScript"
+                DefaultHTMLPageLayout = "Grid"
+                DefaultTargetSchema = "IE50"
+                DelaySign = "false"
+                OutputType = "WinExe"
+                PreBuildEvent = ""
+                PostBuildEvent = ""
+                RootNamespace = "CmpRpt"
+                RunPostBuildEvent = "OnBuildSuccess"
+                StartupObject = ""
+            >
+                <Config
+                    Name = "Debug"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "DEBUG;TRACE"
+                    DocumentationFile = ""
+                    DebugSymbols = "true"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "true"
+                    NoStdLib = "false"
+                    NoWarn = ""
+                    Optimize = "false"
+                    OutputPath = "..\..\..\..\Ve-proms.net\BIN\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+                <Config
+                    Name = "Release"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "TRACE"
+                    DocumentationFile = ""
+                    DebugSymbols = "false"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = ""
+                    Optimize = "true"
+                    OutputPath = "..\..\..\..\Ve-proms.net\BIN\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+            </Settings>
+            <References>
+                <Reference
+                    Name = "System"
+                    AssemblyName = "System"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.0.3705\System.dll"
+                />
+                <Reference
+                    Name = "System.Data"
+                    AssemblyName = "System.Data"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.0.3705\System.Data.dll"
+                />
+                <Reference
+                    Name = "System.Drawing"
+                    AssemblyName = "System.Drawing"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.0.3705\System.Drawing.dll"
+                />
+                <Reference
+                    Name = "System.Windows.Forms"
+                    AssemblyName = "System.Windows.Forms"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.0.3705\System.Windows.Forms.dll"
+                />
+                <Reference
+                    Name = "System.XML"
+                    AssemblyName = "System.Xml"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.0.3705\System.XML.dll"
+                />
+                <Reference
+                    Name = "ROField"
+                    AssemblyName = "ROField"
+                    HintPath = "..\..\..\..\Ve-proms.net\BIN\ROField.dll"
+                    Private = "False"
+                />
+                <Reference
+                    Name = "VlnStatus"
+                    AssemblyName = "VlnStatus"
+                    HintPath = "..\..\..\..\Ve-proms.net\BIN\VlnStatus.dll"
+                    Private = "False"
+                />
+                <Reference
+                    Name = "RODBInterface"
+                    AssemblyName = "RODBInterface"
+                    HintPath = "..\..\..\..\Ve-proms.net\BIN\RODBInterface.dll"
+                    Private = "False"
+                />
+                <Reference
+                    Name = "DBEncapsulation"
+                    AssemblyName = "DBEncapsulation"
+                    HintPath = "..\..\..\..\Ve-proms.net\BIN\DBEncapsulation.dll"
+                    Private = "False"
+                />
+            </References>
+        </Build>
+        <Files>
+            <Include>
+                <File
+                    RelPath = "app.config"
+                    BuildAction = "None"
+                />
+                <File
+                    RelPath = "App.ico"
+                    BuildAction = "Content"
+                />
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CmpRpt.cs"
+                    SubType = "Form"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CmpRpt.resx"
+                    DependentUpon = "CmpRpt.cs"
+                    BuildAction = "EmbeddedResource"
+                />
+            </Include>
+        </Files>
+    </CSHARP>
+</VisualStudioProject>
+

PROMS/ReferencedObjectsOld/Exe/RefObj/CmpRpt/CmpRpt.resx

@@ -0,0 +1,102 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+            Microsoft ResX Schema 
+        
+            Version 1.3
+                
+            The primary goals of this format is to allow a simple XML format 
+            that is mostly human readable. The generation and parsing of the 
+            various data types are done through the TypeConverter classes 
+            associated with the data types.
+        
+            Example:
+        
+                ... ado.net/XML headers & schema ...
+                <resheader name="resmimetype">text/microsoft-resx</resheader>
+                <resheader name="version">1.3</resheader>
+                <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+                <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+                <data name="Name1">this is my long string</data>
+                <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+                <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+                    [base64 mime encoded serialized .NET Framework object]
+                </data>
+                <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+                    [base64 mime encoded string representing a byte array form of the .NET Framework object]
+                </data>
+        
+            There are any number of "resheader" rows that contain simple 
+            name/value pairs.
+            
+            Each data row contains a name, and value. The row also contains a 
+            type or mimetype. Type corresponds to a .NET class that support 
+            text/value conversion through the TypeConverter architecture. 
+            Classes that don't support this are serialized and stored with the 
+            mimetype set.
+                     
+            The mimetype is used for serialized objects, and tells the 
+            ResXResourceReader how to depersist the object. This is currently not 
+            extensible. For a given mimetype the value must be set accordingly:
+        
+            Note - application/x-microsoft.net.object.binary.base64 is the format 
+                   that the ResXResourceWriter will generate, however the reader can 
+                   read any of the formats listed below.
+        
+            mimetype: application/x-microsoft.net.object.binary.base64
+            value   : The object must be serialized with 
+                    : System.Serialization.Formatters.Binary.BinaryFormatter
+                    : and then encoded with base64 encoding.
+        
+            mimetype: application/x-microsoft.net.object.soap.base64
+            value   : The object must be serialized with 
+                    : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+                    : and then encoded with base64 encoding.
+            mimetype: application/x-microsoft.net.object.bytearray.base64
+            value   : The object must be serialized into a byte array 
+                    : using a System.ComponentModel.TypeConverter
+                    : and then encoded with base64 encoding.
+        -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>1.3</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="$this.Name">
+    <value>Form1</value>
+  </data>
+</root>

PROMS/ReferencedObjectsOld/Exe/RefObj/CmpRpt/CmpRpt.sln

@@ -0,0 +1,39 @@
+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "CmpRpt", "CmpRpt.csproj", "{C4293263-EA9C-11D6-8515-00A0CC271352}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DBEncapsulation", "..\..\..\LibSource\DBEncapsulation\DBEncapsulation.csproj", "{6D44F537-879E-11D6-84B8-00A0CC271352}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "RODBInterface", "..\..\..\LibSource\RODBInterface\RODBInterface.csproj", "{0C7825FD-AA05-11D6-84D1-00A0CC271352}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "ROFields", "..\..\..\LibSource\ROField\ROFields.csproj", "{0C782592-AA05-11D6-84D1-00A0CC271352}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		Debug = Debug
+		Release = Release
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{C4293263-EA9C-11D6-8515-00A0CC271352}.Debug.ActiveCfg = Debug|.NET
+		{C4293263-EA9C-11D6-8515-00A0CC271352}.Debug.Build.0 = Debug|.NET
+		{C4293263-EA9C-11D6-8515-00A0CC271352}.Release.ActiveCfg = Release|.NET
+		{C4293263-EA9C-11D6-8515-00A0CC271352}.Release.Build.0 = Release|.NET
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Debug.ActiveCfg = Debug|.NET
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Release.ActiveCfg = Release|.NET
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Debug.ActiveCfg = Debug|.NET
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Release.ActiveCfg = Release|.NET
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Debug.ActiveCfg = Debug|.NET
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Release.ActiveCfg = Release|.NET
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

PROMS/ReferencedObjectsOld/Exe/RefObj/CmpRpt/app.config

@@ -0,0 +1,7 @@
+<?xml version="1.0"?>
+<configuration>
+	<startup>
+	<supportedRuntime version="v1.1.4322"/>
+	<requiredRuntime version="v1.1.4322" safemode="true"/></startup><runtime>
+		<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1" appliesTo="v1.0.3705">
+		</assemblyBinding></runtime></configuration>

PROMS/ReferencedObjectsOld/Exe/RefObj/ParadoxConversion/AssemblyInfo.cs

@@ -0,0 +1,55 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//

PROMS/ReferencedObjectsOld/Exe/RefObj/ParadoxConversion/AssemblyInfo.cs.bak

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("E:\\proms.net\\Public Key\\vlnkey.snk")]
+[assembly: AssemblyKeyName("")]

PROMS/ReferencedObjectsOld/Exe/RefObj/ParadoxConversion/Form1.cs

@@ -0,0 +1,351 @@
+/*********************************************************************************************
+ * Copyright 2002 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: Form1.cs $     $Revision: 7 $
+ * $Author: Jsj $   $Date: 1/06/03 12:53p $
+ *
+ * $History: Form1.cs $
+ * 
+ * *****************  Version 7  *****************
+ * User: Jsj          Date: 1/06/03    Time: 12:53p
+ * Updated in $/EXE/RefObj/ParadoxConversion
+ * cleanup
+ * 
+ * *****************  Version 6  *****************
+ * User: Jsj          Date: 1/06/03    Time: 11:35a
+ * Updated in $/EXE/RefObj/ParadoxConversion
+ * When called from the RO Editor, hide the Find RO Directory button
+ * 
+ * *****************  Version 5  *****************
+ * User: Jsj          Date: 12/18/02   Time: 12:47p
+ * Updated in $/EXE/RefObj/ParadoxConversion
+ * new icons
+ * 
+ * *****************  Version 4  *****************
+ * User: Jsj          Date: 12/06/02   Time: 3:21p
+ * Updated in $/EXE/RefObj/ParadoxConversion
+ * added command line argument (DEBUG) to turn on writing debug message to
+ * a file
+ * 
+ * *****************  Version 3  *****************
+ * User: Jsj          Date: 10/04/02   Time: 2:02p
+ * Updated in $/EXE/RefObj/ParadoxConversion
+ * added better user interface
+ * 
+ * *****************  Version 2  *****************
+ * User: Jsj          Date: 9/25/02    Time: 10:19a
+ * Updated in $/EXE/RefObj/ParadoxConversion
+ * added header
+ *********************************************************************************************/
+
+using System;
+using System.Drawing;
+using System.Collections;
+using System.ComponentModel;
+using System.Windows.Forms;
+using System.Data;
+using System.IO;
+
+namespace ParadoxConversion
+{
+	/// <summary>
+	/// Summary description for Form1.
+	/// </summary>
+	public class Form1 : System.Windows.Forms.Form
+	{
+		bool DidConvert = false;
+		bool ShowBtnFndRO = true;
+		public Form MainForm;
+		private System.Windows.Forms.Button button1;
+		private System.Windows.Forms.Label StatWindow;
+		private string PassedInDirPath;
+		private System.Windows.Forms.Button btnFndRO;
+		private System.Windows.Forms.Button btnExit;
+		private bool DoDebugFile;
+
+		/// <summary>
+		/// Required designer variable.
+		/// </summary>
+		private System.ComponentModel.Container components = null;
+
+		public void StatusWindow(String Message1,String Message2, String Message3)
+		{
+			StatWindow.Text = Message1 + Message2 + Message3;
+		}
+
+		public Form1(string Connpath, bool doingDebug)
+		{
+			//
+			// Required for Windows Form Designer support
+			//
+//			Icon = new Icon(typeof(Form1),"V.ico");
+			InitializeComponent();
+			PassedInDirPath = Connpath;
+			if (!Connpath.Equals(""))
+				ShowBtnFndRO = false;
+			DoDebugFile = doingDebug;
+
+			//
+			// TODO: Add any constructor code after InitializeComponent call
+			//
+		}
+
+		/// <summary>
+		/// Clean up any resources being used.
+		/// </summary>
+		protected override void Dispose( bool disposing )
+		{
+			if( disposing )
+			{
+				if (components != null) 
+				{
+					components.Dispose();
+				}
+			}
+			base.Dispose( disposing );
+		}
+
+		#region Windows Form Designer generated code
+		/// <summary>
+		/// Required method for Designer support - do not modify
+		/// the contents of this method with the code editor.
+		/// </summary>
+		private void InitializeComponent()
+		{
+			System.Resources.ResourceManager resources = new System.Resources.ResourceManager(typeof(Form1));
+			this.button1 = new System.Windows.Forms.Button();
+			this.StatWindow = new System.Windows.Forms.Label();
+			this.btnFndRO = new System.Windows.Forms.Button();
+			this.btnExit = new System.Windows.Forms.Button();
+			this.SuspendLayout();
+			// 
+			// button1
+			// 
+			this.button1.Font = new System.Drawing.Font("Tahoma", 11.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.button1.Location = new System.Drawing.Point(176, 152);
+			this.button1.Name = "button1";
+			this.button1.Size = new System.Drawing.Size(80, 40);
+			this.button1.TabIndex = 0;
+			this.button1.Text = "Convert";
+			this.button1.Click += new System.EventHandler(this.button1_Click);
+			// 
+			// StatWindow
+			// 
+			this.StatWindow.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D;
+			this.StatWindow.Font = new System.Drawing.Font("Tahoma", 9.75F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.StatWindow.Location = new System.Drawing.Point(8, 16);
+			this.StatWindow.Name = "StatWindow";
+			this.StatWindow.Size = new System.Drawing.Size(368, 112);
+			this.StatWindow.TabIndex = 1;
+			this.StatWindow.TextAlign = System.Drawing.ContentAlignment.MiddleCenter;
+			// 
+			// btnFndRO
+			// 
+			this.btnFndRO.Font = new System.Drawing.Font("Tahoma", 11.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.btnFndRO.Location = new System.Drawing.Point(8, 152);
+			this.btnFndRO.Name = "btnFndRO";
+			this.btnFndRO.Size = new System.Drawing.Size(152, 40);
+			this.btnFndRO.TabIndex = 2;
+			this.btnFndRO.Text = "Find RO Directory";
+			this.btnFndRO.Click += new System.EventHandler(this.btnFndRO_Click);
+			// 
+			// btnExit
+			// 
+			this.btnExit.Font = new System.Drawing.Font("Tahoma", 11.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.btnExit.Location = new System.Drawing.Point(288, 152);
+			this.btnExit.Name = "btnExit";
+			this.btnExit.Size = new System.Drawing.Size(80, 40);
+			this.btnExit.TabIndex = 3;
+			this.btnExit.Text = "Exit";
+			this.btnExit.Click += new System.EventHandler(this.btnExit_Click);
+			// 
+			// Form1
+			// 
+			this.AutoScaleBaseSize = new System.Drawing.Size(5, 13);
+			this.ClientSize = new System.Drawing.Size(384, 197);
+			this.Controls.AddRange(new System.Windows.Forms.Control[] {
+																		  this.btnExit,
+																		  this.btnFndRO,
+																		  this.StatWindow,
+																		  this.button1});
+			this.Icon = ((System.Drawing.Icon)(resources.GetObject("$this.Icon")));
+			this.Name = "Form1";
+			this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
+			this.Text = "Referenced Object Database Conversion";
+			this.Load += new System.EventHandler(this.Form1_Load);
+			this.Paint += new System.Windows.Forms.PaintEventHandler(this.Form1_Paint);
+			this.ResumeLayout(false);
+
+		}
+		#endregion
+
+		/// <summary>
+		/// The main entry point for the application.
+		/// </summary>
+
+		static bool ValidateConnectionPath(string ConPath)
+		{
+			bool validPath = true;
+			string tmpstr = "";
+
+			if (ConPath.Equals(""))
+				validPath = false;
+			else
+			{
+				// make sure we are in a directory named "RO"
+				if (ConPath.IndexOf("\\") != -1)
+				{
+					tmpstr = ConPath.Substring(ConPath.LastIndexOf("\\"));
+					tmpstr = tmpstr.ToUpper();
+				}
+				else 
+					tmpstr = ConPath;
+				if (!tmpstr.Equals("\\RO"))
+				{
+					string tstr = "This is not an RO directory:\n\n" + ConPath;
+					MessageBox.Show(tstr,"Error",MessageBoxButtons.OK,MessageBoxIcon.Error);
+					//				Application.Exit();
+					validPath = false;
+				}
+				// make sure there is at least an ROMASTER file
+				if (validPath && !File.Exists("ROMASTER.db"))
+				{
+					string tstr = "This RO directory is empty:" + ConPath;
+					MessageBox.Show(tstr,"Error",MessageBoxButtons.OK,MessageBoxIcon.Error);
+					//				Application.Exit();
+					validPath = false;
+				}
+			}
+
+			return validPath;
+		}
+
+		static string GetRODirPath(string ConPath)
+		{
+			string rtnstr = "";
+			string tmpstr = "";
+			OpenFileDialog ofDlg = new OpenFileDialog();
+			ofDlg.Title = "Navigate to the Referenced Objects (RO) directory";
+			ofDlg.Filter = "Referenced Objects|ROMASTER.DB;|All Files|*.*";
+
+			if (ConPath.Equals(""))
+				tmpstr = "c:\\";
+
+			ofDlg.CheckPathExists = true;
+			ofDlg.FileName = "ROMASTER.DB";
+			ofDlg.InitialDirectory = tmpstr;
+
+			if (ofDlg.ShowDialog() == DialogResult.OK)
+			{
+				tmpstr = ofDlg.FileName;
+				rtnstr = Path.GetDirectoryName(tmpstr);
+			}
+			else
+			{
+				string tstr = "Cannot convert Referenced Objects data.\n\nInvalid RO directory:\n\n" + ConPath;
+				MessageBox.Show(tstr,"Error",MessageBoxButtons.OK,MessageBoxIcon.Error);
+				rtnstr = null;
+			}
+		return rtnstr;
+		}
+
+		[STAThread]
+		static void Main(string[] args) 
+		{
+			string ConnectionPath = "";
+			bool DebugFile = false;
+			// if an RO directory path was passed in, then change the
+			//  current working directory to it.
+			// this path will also be used to generate a connection string
+			// to the Access database.
+			if (args.Length > 0)
+			{
+				string tmpstr;
+				for (int i = 0; i<args.Length; i++)
+				{
+					tmpstr = args[0];
+					if (tmpstr.Equals("DEBUG"))
+						DebugFile = true;
+					else
+					{
+						ConnectionPath = tmpstr;
+						Directory.SetCurrentDirectory(ConnectionPath);
+						ConnectionPath = Directory.GetCurrentDirectory();
+					}
+				}
+			}
+				Form MainForm = new Form1(ConnectionPath,DebugFile);
+				Application.Run(MainForm);
+		}
+
+		private void button1_Click(object sender, System.EventArgs e)
+		{
+			if (!DidConvert)
+			{
+				StatWindow.Text = "";
+				ConvertParadoxROs CvrtROs = new ConvertParadoxROs(StatWindow,DoDebugFile);
+				CvrtROs.ConvertParadoxRODb(PassedInDirPath);
+				StatWindow.Text = " *** Conversion Complete ****";
+				DidConvert = true;
+				button1.Enabled = false;
+				this.Refresh();
+			}
+			else
+			{
+				Application.Exit();
+			}
+		}
+
+		private void Form1_Load(object sender, System.EventArgs e)
+		{
+		
+		}
+
+		private void btnFndRO_Click(object sender, System.EventArgs e)
+		{
+			while ((PassedInDirPath != null) && !ValidateConnectionPath(PassedInDirPath))
+			{
+				PassedInDirPath = GetRODirPath(PassedInDirPath);
+			}
+
+			if (PassedInDirPath == null)
+			{
+				Application.Exit();
+			}
+			DidConvert = false;
+		
+		}
+
+		private void btnExit_Click(object sender, System.EventArgs e)
+		{
+			Application.Exit();
+		}
+
+		private void Form1_Paint(object sender, System.Windows.Forms.PaintEventArgs e)
+		{
+			string msgtxt = "";
+			if (!DidConvert)
+			{
+				if ((PassedInDirPath == null) || !ValidateConnectionPath(PassedInDirPath))
+				{
+					button1.Enabled = false;
+					btnFndRO.Enabled = true;
+					msgtxt = "Press the Find RO Directory button to locate the Referened Objects you want to Convert.";
+				}
+				else
+				{
+					if (PassedInDirPath != null)
+					button1.Enabled = true;
+					if (!ShowBtnFndRO)
+						btnFndRO.Hide();
+					msgtxt = "Current RO directory selected:\n\n" + PassedInDirPath;
+				}
+
+				StatWindow.Text = msgtxt;
+			}
+		
+		}
+
+	}
+}

PROMS/ReferencedObjectsOld/Exe/RefObj/ParadoxConversion/Form1.resx

@@ -0,0 +1,124 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+            Microsoft ResX Schema 
+        
+            Version 1.3
+                
+            The primary goals of this format is to allow a simple XML format 
+            that is mostly human readable. The generation and parsing of the 
+            various data types are done through the TypeConverter classes 
+            associated with the data types.
+        
+            Example:
+        
+                ... ado.net/XML headers & schema ...
+                <resheader name="resmimetype">text/microsoft-resx</resheader>
+                <resheader name="version">1.3</resheader>
+                <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+                <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+                <data name="Name1">this is my long string</data>
+                <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+                <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+                    [base64 mime encoded serialized .NET Framework object]
+                </data>
+                <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+                    [base64 mime encoded string representing a byte array form of the .NET Framework object]
+                </data>
+        
+            There are any number of "resheader" rows that contain simple 
+            name/value pairs.
+            
+            Each data row contains a name, and value. The row also contains a 
+            type or mimetype. Type corresponds to a .NET class that support 
+            text/value conversion through the TypeConverter architecture. 
+            Classes that don't support this are serialized and stored with the 
+            mimetype set.
+                     
+            The mimetype is used for serialized objects, and tells the 
+            ResXResourceReader how to depersist the object. This is currently not 
+            extensible. For a given mimetype the value must be set accordingly:
+        
+            Note - application/x-microsoft.net.object.binary.base64 is the format 
+                   that the ResXResourceWriter will generate, however the reader can 
+                   read any of the formats listed below.
+        
+            mimetype: application/x-microsoft.net.object.binary.base64
+            value   : The object must be serialized with 
+                    : System.Serialization.Formatters.Binary.BinaryFormatter
+                    : and then encoded with base64 encoding.
+        
+            mimetype: application/x-microsoft.net.object.soap.base64
+            value   : The object must be serialized with 
+                    : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+                    : and then encoded with base64 encoding.
+            mimetype: application/x-microsoft.net.object.bytearray.base64
+            value   : The object must be serialized into a byte array 
+                    : using a System.ComponentModel.TypeConverter
+                    : and then encoded with base64 encoding.
+        -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>1.3</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="$this.Name">
+    <value>Form1</value>
+  </data>
+  <data name="$this.Icon" type="System.Drawing.Icon, System.Drawing, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" mimetype="application/x-microsoft.net.object.bytearray.base64">
+    <value>
+        AAABAAIAEBAQAAAAAAAoAQAAJgAAACAgEAAAAAAA6AIAAE4BAAAoAAAAEAAAACAAAAABAAQAAAAAAIAA
+        AAAAAAAAAAAAABAAAAAQAAAAAAAAAAAAgAAAgAAAAICAAIAAAACAAIAAgIAAAICAgADAwMAAAAD/AAD/
+        AAAA//8A/wAAAP8A/wD//wAA////AAAAAJmQAAAAAAAAAAAAAAAAAAB3cAAAAAAAAHdwAAAAAAAAd3AA
+        AAAAAAd3dwAAAAAAd3d3cAAAAAd3d3d3AAAAd3d3d3dwAAAAAAAAAAAAAIeBERGHgAAAAAEREQAAAAAA
+        ARERAAAAAAABEREAAAAAAAEREQAAAAAAARERAAAA/H8AAPg/AAD4PwAA+D8AAPg/AADwHwAA4A8AAMAH
+        AACAAwAAAAEAAIADAADABwAA+D8AAPg/AAD4PwAA+D8AACgAAAAgAAAAQAAAAAEABAAAAAAAAAIAAAAA
+        AAAAAAAAEAAAABAAAAAAAAAAAACAAACAAAAAgIAAgAAAAIAAgACAgAAAgICAAMDAwAAAAP8AAP8AAAD/
+        /wD/AAAA/wD/AP//AAD///8AAAAAAAAAAAAAAAAAAAAADAAAAAAAAAAAAAAAAHcAAMAAAAAAAAAAAAAA
+        AAd3AAwMAAAAAAAAAAAAAAB3dwDAwAAAAAAAAAAAAAAHd3cMDAAAd3d3d3d3d3d3d3d3AMAAAHFxdxd3
+        dxdxF3ERdwwAAABxcXFxd3dxd3Fxd3cADAwAcRdxcXERERcXdxd3AMDAAHFxcXF3d3F3cXdxdwwAAABx
+        F3cXd3cXcRdxEXcAwAAAd3d3dwAAAAAAB3d3DAzAAHd3F3cAiIiIiIB3dwDADAB3cRF3CAiIiIiIB3cA
+        DAAAdxcXFwiAAAAAAIB3AADAAHd3F3cIgAAAAAAIAAAADAB3dxd3CIAAAAAAAIgAAAAAd3cXdwiAAAAA
+        AAAIAAAAAHd3d3cIgAAAAAAAAAAAAABxEXcXCIAAAAAAAAAAAAAAdxdxcQiAAAAAAAAAAAAAAHcXcRcI
+        gAAAAAAAAAAAAABxF3F3CIAAAAAAAAAAAAAAdxd3FwiAAAAAAAAAAAAAAAAAAAAIgAAAAAAAAAAAAACI
+        iIiICIAAAAAAAAAAAAAACIcAeICAAAAAAAAAAAAAAACEREiIAAAAAAAAAAAAAAAABERAAAAAAAAAAAAA
+        AAAAAAREQAAAAAAAAAAAAAAAAAAEREAAAAAAAAAAAAAAAAAABERAAAAAAAAAAAAAAAD///8e///+Hf//
+        /Br///gVgAAAC4AAABeAAAAPgAAAGoAAABWAAAAPgAAAF4AAAAmAAAAWgAAAG4AAAB2AA/wegAP+H4AD
+        /x+AA/+fgAP//4AD//+AA///gAP//4AD//+AA///gAP//8AD///gA///8AP///h////4f///+H///w==
+</value>
+  </data>
+</root>

PROMS/ReferencedObjectsOld/Exe/RefObj/ParadoxConversion/ParadoxConversion.csproj

@@ -0,0 +1,129 @@
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup>
+    <ProjectType>Local</ProjectType>
+    <ProductVersion>8.0.50727</ProductVersion>
+    <SchemaVersion>2.0</SchemaVersion>
+    <ProjectGuid>{2FEB12F6-B8F7-11D6-8550-A8738D000000}</ProjectGuid>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ApplicationIcon>ROConvrt.ico</ApplicationIcon>
+    <AssemblyKeyContainerName>
+    </AssemblyKeyContainerName>
+    <AssemblyName>ParadoxConversion</AssemblyName>
+    <AssemblyOriginatorKeyFile>
+    </AssemblyOriginatorKeyFile>
+    <DefaultClientScript>JScript</DefaultClientScript>
+    <DefaultHTMLPageLayout>Grid</DefaultHTMLPageLayout>
+    <DefaultTargetSchema>IE50</DefaultTargetSchema>
+    <DelaySign>false</DelaySign>
+    <OutputType>WinExe</OutputType>
+    <RootNamespace>ParadoxConversion</RootNamespace>
+    <RunPostBuildEvent>OnBuildSuccess</RunPostBuildEvent>
+    <StartupObject>
+    </StartupObject>
+    <FileUpgradeFlags>
+    </FileUpgradeFlags>
+    <UpgradeBackupLocation>
+    </UpgradeBackupLocation>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <OutputPath>bin\Debug\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>true</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <NoStdLib>false</NoStdLib>
+    <NoWarn>
+    </NoWarn>
+    <Optimize>false</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>full</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <OutputPath>bin\Release\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>TRACE</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>false</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <NoStdLib>false</NoStdLib>
+    <NoWarn>
+    </NoWarn>
+    <Optimize>true</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>none</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System">
+      <Name>System</Name>
+    </Reference>
+    <Reference Include="System.Data">
+      <Name>System.Data</Name>
+    </Reference>
+    <Reference Include="System.Drawing">
+      <Name>System.Drawing</Name>
+    </Reference>
+    <Reference Include="System.Windows.Forms">
+      <Name>System.Windows.Forms</Name>
+    </Reference>
+    <Reference Include="System.Xml">
+      <Name>System.XML</Name>
+    </Reference>
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="app.config" />
+    <Content Include="App.ico" />
+    <Compile Include="AssemblyInfo.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="ConvertParadoxROs.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="Form1.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="RODBRecordInterface.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <EmbeddedResource Include="Form1.resx">
+      <DependentUpon>Form1.cs</DependentUpon>
+    </EmbeddedResource>
+    <EmbeddedResource Include="ROConvrt.ico" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\..\..\LibSource\DBEncapsulation\DBEncapsulation.csproj">
+      <Project>{6D44F537-879E-11D6-84B8-00A0CC271352}</Project>
+      <Name>DBEncapsulation</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\..\..\LibSource\ROField\ROFields.csproj">
+      <Project>{0C782592-AA05-11D6-84D1-00A0CC271352}</Project>
+      <Name>ROFields</Name>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
+  <PropertyGroup>
+    <PreBuildEvent>
+    </PreBuildEvent>
+    <PostBuildEvent>
+    </PostBuildEvent>
+  </PropertyGroup>
+</Project>

PROMS/ReferencedObjectsOld/Exe/RefObj/ParadoxConversion/ParadoxConversion.sln

@@ -0,0 +1,29 @@
+Microsoft Visual Studio Solution File, Format Version 9.00
+# Visual Studio 2005
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "ParadoxConversion", "ParadoxConversion.csproj", "{2FEB12F6-B8F7-11D6-8550-A8738D000000}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "ROFields", "..\..\..\LibSource\ROField\ROFields.csproj", "{0C782592-AA05-11D6-84D1-00A0CC271352}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DBEncapsulation", "..\..\..\LibSource\DBEncapsulation\DBEncapsulation.csproj", "{6D44F537-879E-11D6-84B8-00A0CC271352}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Release|Any CPU = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{2FEB12F6-B8F7-11D6-8550-A8738D000000}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{2FEB12F6-B8F7-11D6-8550-A8738D000000}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{2FEB12F6-B8F7-11D6-8550-A8738D000000}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{2FEB12F6-B8F7-11D6-8550-A8738D000000}.Release|Any CPU.Build.0 = Release|Any CPU
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Release|Any CPU.ActiveCfg = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal

PROMS/ReferencedObjectsOld/Exe/RefObj/ParadoxConversion/RODBRecordInterface.cs

@@ -0,0 +1,352 @@
+/*********************************************************************************************
+ * Copyright 2002 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: RODBRecordInterface.cs $     $Revision: 4 $
+ * $Author: Jsj $   $Date: 1/27/03 2:56p $
+ *
+ * $History: RODBRecordInterface.cs $
+ * 
+ * *****************  Version 4  *****************
+ * User: Jsj          Date: 1/27/03    Time: 2:56p
+ * Updated in $/EXE/RefObj/ParadoxConversion
+ * using OLEDB for the connection
+ * 
+ * *****************  Version 3  *****************
+ * User: Jsj          Date: 10/04/02   Time: 2:02p
+ * Updated in $/EXE/RefObj/ParadoxConversion
+ * added better user interface
+ * 
+ * *****************  Version 2  *****************
+ * User: Jsj          Date: 9/25/02    Time: 10:20a
+ * Updated in $/EXE/RefObj/ParadoxConversion
+ * added header
+ *********************************************************************************************/
+
+using System;
+//using System.Collections;
+using System.IO;
+using System.Data;
+using System.Text;
+using System.Windows.Forms;
+using DBEncapsulation;
+
+namespace ParadoxConversion
+{
+	/// <summary>
+	/// This class contains a very simple interface to the RO Database.
+	/// All the database conversion module needs is to create a new table
+	/// and write a database record.
+	/// </summary>
+	public class RODBRecordInterface
+	{
+		bool success;
+
+		DBEncapsulation.DBEncapsulate DBE;
+		DBEncapsulation.OLEDB_DBEncap DBE_OLEDB;
+		DBEncapsulation.ODBC_DBEncap DBE_ODBC;
+
+		private string strAccOLEDBconn = "";
+		private string strSQLOLEDBconn = "";
+		private string strAccODBCconn = "";
+		private string strodbcConn = "";
+
+		public RODBRecordInterface(int conntype, string connectstring)
+		{
+			// Setup the connection string
+//			if (connectstring.Equals(""))
+//				GetConnectionStringFromFile();
+//			else
+				BuildConnectionString(connectstring);
+
+			// Initialize the connection depending on OLE-DB or ODBC:
+			conntype = 2;   // for now - till valid data passed in.
+//			conntype = 1;   // for now - till valid data passed in.
+			//END OF TEMPORARY
+
+			// Either use an OLE-DB or ODBC connection, depending on what was passed in.
+			if ( conntype == 1) 
+			{
+				DBE_ODBC = new ODBC_DBEncap();
+				DBE = DBE_ODBC;
+			}
+			else
+			{
+				DBE_OLEDB = new OLEDB_DBEncap();
+				DBE = DBE_OLEDB;
+			}
+			
+			try
+			{
+				DBE.Connection(strAccOLEDBconn);   
+//				DBE.Connection(strodbcConn);   
+			}
+			catch (Exception e)
+			{
+				Console.WriteLine("error {0}", e.Message);
+			}
+		}
+
+		public void RODB_OpenConnection()
+		{
+			try
+			{
+				DBE.OpenConnection();
+			}
+			catch (Exception e)
+			{
+				Console.WriteLine("Error opening database connection.\n{0}",e.Message);
+			}
+		}
+
+		public void RODB_CloseConnection()
+		{
+			try
+			{
+				DBE.CloseConnection();
+			}
+			catch (Exception e)
+			{
+				Console.WriteLine("Error closing database connection.\n",e.Message);
+			}
+		}
+		
+		/*
+		 * Create a new Referenced Objects table in the current database
+		 */
+		public void RODB_AddNewTable(String TblName)
+		{
+
+			string strMkTable = "CREATE TABLE "+ TblName + " (";
+//			strMkTable = strMkTable + "UID Integer NULL ,";
+			strMkTable = strMkTable + "RecID Char(8) NULL ,";
+			strMkTable = strMkTable + "RecType Integer ,";
+			strMkTable = strMkTable + "ParentID char(8) NULL ,";
+			strMkTable = strMkTable + "AccPageID char(32) NULL ,";
+			strMkTable = strMkTable + "ModDateTime char(14) NULL ,";
+			strMkTable = strMkTable + "Info Memo NULL)"; 
+			try
+			{
+				DBE.Command(strMkTable);
+//				DBE.Reader();
+			}
+			catch (Exception e)
+			{
+				Console.WriteLine("Command error:\n{0}", e.Message);
+				//				bool retval = false;
+			}
+			//			DBE.ReaderClose();
+			try
+			{
+				DBE.NonQuery();
+			}
+			catch (Exception e)
+			{
+				Console.WriteLine("NonQuery error:\n{0}", e.Message);
+				//				bool retval = false;
+			}
+			DBE.CommandDispose();
+		}
+
+		/*
+		 * Write an RO Database record
+		 */
+		public void RODB_WriteDbRecord(String DBTable, String RecID, int RecType, String ParID, String AcPgID, String DateTime, String Info)
+		{
+			String DbRecCmd;
+
+			// if no RecID provided, then get the next available one.
+			if (RecID.CompareTo("") == 0)
+			{
+				RecID = RODB_GetNextRecid(DBTable);
+			}
+			
+			DbRecCmd = "INSERT INTO " + DBTable + " (RecID, RecType, ParentID, AccPageID, ModDateTime, Info) VALUES ('";
+			DbRecCmd += RecID + "', " + RecType + ", '" + ParID + "', '" + AcPgID + "', '" + DateTime + "', '" + Info	+ "');"; 
+			try
+			{
+				DBE.Command(DbRecCmd);
+			}
+			catch (Exception e)
+			{
+				success = false;
+				Console.WriteLine("RODB_WriteDbRecord  Caught an exception:\n{0}", e.Message);
+			}
+			try
+			{
+				DBE.NonQuery();
+			}
+			catch (Exception e)
+			{
+				Console.WriteLine("NonQuery error:\n{0}", e.Message);
+				//				bool retval = false;
+			}
+			DBE.CommandDispose();
+		}
+
+		public void GetConnectionStringFromFile()
+		{
+			/* This file should contain the connection strings in the followin order:
+			 * AccOLEDBconn, SQLOLEDBconn, AccODBCconn, odbcConn.
+			 */
+			// append "ConnectList.txt" to the path of the location of the exe being run
+			// for example: VE-PROMS.NET\BIN or BIN\DEBUG
+			// This set in Visual Studio .NET in the properties dialog of the project, select
+			// Configuration Properties.  You will see an option call Output Path.
+			string FileName = Application.StartupPath + "\\ConnectList.txt";
+
+			if (!File.Exists(FileName))
+			{
+				// File does not exist
+				Console.WriteLine("Could not find ConnectList.txt file");
+				return;
+			}
+
+			/*
+			 * Open the text file for reading
+			 */
+			StreamReader sr = File.OpenText(FileName);
+
+			/*
+			 * Connection string to MS-access use with oledb directly
+			 */
+			strAccOLEDBconn = sr.ReadLine();
+
+			/* 
+			 * connection string to SQL-server use with oledb
+			 */
+			strSQLOLEDBconn = sr.ReadLine();
+
+			/* 
+			 * connection string to for oledb to odbc dsn
+			 */
+			strAccODBCconn = sr.ReadLine();
+
+			/* 
+			 * ODBC connection:
+			 * ACCESS:
+			 */
+			strodbcConn = sr.ReadLine();
+			
+			sr.Close(); // close ConnectList.txt
+
+		}
+
+		public void BuildConnectionString(string DataConnectionPath)
+		{
+			/*
+			 *  Connect to MSAccess using OLEDB directly
+			 */
+
+			//			strAccOLEDBconn = "Provider=Microsoft.Jet.OLEDB.4.0;Password=\"\";User ID=Admin;Data Source=I:\\RO Design\\RO\\ROMaster.mdb;Mode=Share Deny None;Extended Properties=\"\";Jet OLEDB:System database=\"\";Jet OLEDB:Registry Path=\"\";Jet OLEDB:Database Password=\"\";Jet OLEDB:Engine Type=5;Jet OLEDB:Database Locking Mode=1;Jet OLEDB:Global Partial Bulk Ops=2;Jet OLEDB:Global Bulk Transactions=1;Jet OLEDB:New Database Password=\"\";Jet OLEDB:Create System Database=False;Jet OLEDB:Encrypt Database=False;Jet OLEDB:Don't Copy Locale on Compact=False;Jet OLEDB:Compact Without Replica Repair=False;Jet OLEDB:SFP=False";
+
+			strAccOLEDBconn = "Provider=Microsoft.Jet.OLEDB.4.0;Password=\"\";User ID=Admin;Data Source=" + DataConnectionPath +"\\ROMaster.mdb;Mode=Share Deny None;Extended Properties=\"\";Jet OLEDB:System database=\"\";Jet OLEDB:Registry Path=\"\";Jet OLEDB:Database Password=\"\";Jet OLEDB:Engine Type=5;Jet OLEDB:Database Locking Mode=1;Jet OLEDB:Global Partial Bulk Ops=2;Jet OLEDB:Global Bulk Transactions=1;Jet OLEDB:New Database Password=\"\";Jet OLEDB:Create System Database=False;Jet OLEDB:Encrypt Database=False;Jet OLEDB:Don't Copy Locale on Compact=False;Jet OLEDB:Compact Without Replica Repair=False;Jet OLEDB:SFP=False";
+
+			/*
+			 *  Connect to SQL-server using OLEDB
+			 */
+			// !!!!! do we need the Workstation ID?  if so, we need to pass this in too!
+
+			//			strSQLOLEDBconn = "Provider=SQLOLEDB;Persist Security Info=False;User ID=sa;Initial Catalog=ROMaster;Data Source=DELL-W2K-SERVER\\SQL2000;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=KATHY;Use Encryption for Data=False;Tag with column collation when possible=False";
+
+			strSQLOLEDBconn = "Provider=SQLOLEDB;Persist Security Info=False;User ID=sa;Initial Catalog=ROMaster;Data Source=" + DataConnectionPath +"\\ROMaster.mdb;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=KATHY;Use Encryption for Data=False;Tag with column collation when possible=False";
+
+			/*
+			 *  Connect to MSAccess using OLEDB and ODBC DSN
+			 */
+
+			//			strAccODBCconn = "Provider=MSDASQL.1;Persist Security Info=False;Data Source=Access for RO;Extended Properties=\"DSN=Access for RO;DBQ=I:\\RO Design\\RO\\ROMaster.mdb;DriverId=25;FIL=MS Access;MaxBufferSize=2048;PageTimeout=5;\"";
+
+			strAccODBCconn = "Provider=MSDASQL.1;Persist Security Info=False;Data Source=Access for RO;Extended Properties=\"DSN=Access for RO;DBQ=" + DataConnectionPath + "\\ROMaster.mdb;DriverId=25;FIL=MS Access;MaxBufferSize=2048;PageTimeout=5;\"";
+
+			/* 
+			 * Connection to MSAccess using an ODBC connection
+			 */
+			//			strodbcConn = "Driver={Microsoft Access Driver (*.mdb)};DBQ=i:\\Ro Design\\RO\\ROMaster.mdb";
+			strodbcConn = "Driver={Microsoft Access Driver (*.mdb)};DBQ=" + DataConnectionPath + "\\ROMaster.mdb";
+
+			// Connection to SQL Server using an ODBC connection
+			//strodbcConn = "Driver={SQL Server};Server=DELL-W2K-SERVER\\SQL2000;UID=sa;Database=ROMaster";
+
+			//SQL - DSN - worked: string strodbcConn = "DSN=SQL RO;UID=sa";
+			//Initial odbc tests on strodbcconn			
+		}
+
+		/*
+		 * Get the next available RO Database RecID
+		 */
+		public String RODB_GetNextRecid(String DBTable)
+		{
+			String NextRecID="";
+			String RtnStr = "";
+			String SpcStr = " ";
+			String ZeroStr = "0";
+			String DbCmd = "SELECT Info FROM " + DBTable + " WHERE RecID = '00000000'";
+
+			try
+			{
+				DBE.Command(DbCmd);
+			}
+			catch (Exception e)
+			{
+				success = false;
+				Console.WriteLine("RODB_GetNextRecid - Read NextRecID Caught an exception:\n{0}", e.Message);
+			}
+
+
+			if (DBE.Reader())
+			{
+				if (DBE.Read())
+				{
+					RtnStr = DBE.GetString(0);
+					DBE.ReaderClose();
+				}
+			}
+			else
+			{
+				System.Windows.Forms.MessageBox.Show("Could Not Open Reader");
+			}
+
+			// Create the new next RecID
+			if (RtnStr.CompareTo("") != 0)
+			{
+				uint nxID = Convert.ToUInt32(RtnStr,16);
+				nxID++;
+				NextRecID = String.Format("{0,8:X}",nxID);// 8 char field padded on left with blanks
+				NextRecID = NextRecID.Replace(SpcStr,ZeroStr);
+			}
+			else
+			{
+				// there is no next RecID
+				Console.WriteLine("RODB_GetNextRecid  No Next RecID!");
+			}
+
+			// Write the new next RecID
+			DbCmd = "UPDATE " + DBTable + " SET " + DBTable + ".Info = '" + NextRecID + "'";
+			DbCmd = DbCmd + " WHERE RecID = '00000000';";
+
+			try
+			{
+				DBE.Command(DbCmd);
+			}
+			catch (Exception e)
+			{
+				success = false;
+				Console.WriteLine("RODB_GetNextRecid - Write new NextRecID  Caught an exception:\n{0}", e.Message);
+			}
+
+			try
+			{
+				DBE.NonQuery();
+			}
+			catch (Exception e)
+			{
+				Console.WriteLine("NonQuery error:\n{0}", e.Message);
+				//				bool retval = false;
+			}
+			DBE.CommandDispose();
+			
+			return RtnStr;
+		}
+	}
+}

PROMS/ReferencedObjectsOld/Exe/RefObj/ParadoxConversion/app.config

@@ -0,0 +1,6 @@
+<?xml version="1.0"?>
+<configuration>
+	<startup>
+	</startup><runtime>
+		<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1" appliesTo="v1.0.3705">
+		</assemblyBinding></runtime></configuration>

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/About.cs

@@ -0,0 +1,184 @@
+using System;
+using System.Drawing;
+using System.Collections;
+using System.ComponentModel;
+using System.Windows.Forms;
+
+namespace ROEditor
+{
+	/// <summary>
+	/// Summary description for About.
+	/// </summary>
+	public class AboutDlg : System.Windows.Forms.Form
+	{
+		private System.Windows.Forms.Button btnHlpAbtOK;
+		private System.Windows.Forms.Label label1;
+		private System.Windows.Forms.Label label2;
+		private System.Windows.Forms.Label CopyrightMessage;
+		private System.Windows.Forms.PictureBox pictureBox1;
+		private System.Windows.Forms.PictureBox pictureBox2;
+		private System.Windows.Forms.LinkLabel VolianWebLink;
+		/// <summary>
+		/// Required designer variable.
+		/// </summary>
+		private System.ComponentModel.Container components = null;
+
+		public AboutDlg()
+		{
+			//
+			// Required for Windows Form Designer support
+			//
+			InitializeComponent();
+			CopyrightMessage.Text = "Copyright \x00A9 1993 - 2008.  All Rights Reserved.";
+
+			//
+			// TODO: Add any constructor code after InitializeComponent call
+			//
+		}
+
+		/// <summary>
+		/// Clean up any resources being used.
+		/// </summary>
+		protected override void Dispose( bool disposing )
+		{
+			if( disposing )
+			{
+				if(components != null)
+				{
+					components.Dispose();
+				}
+			}
+			base.Dispose( disposing );
+		}
+
+		#region Windows Form Designer generated code
+		/// <summary>
+		/// Required method for Designer support - do not modify
+		/// the contents of this method with the code editor.
+		/// </summary>
+		private void InitializeComponent()
+		{
+			System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(AboutDlg));
+			this.btnHlpAbtOK = new System.Windows.Forms.Button();
+			this.label1 = new System.Windows.Forms.Label();
+			this.label2 = new System.Windows.Forms.Label();
+			this.CopyrightMessage = new System.Windows.Forms.Label();
+			this.pictureBox1 = new System.Windows.Forms.PictureBox();
+			this.pictureBox2 = new System.Windows.Forms.PictureBox();
+			this.VolianWebLink = new System.Windows.Forms.LinkLabel();
+			((System.ComponentModel.ISupportInitialize)(this.pictureBox1)).BeginInit();
+			((System.ComponentModel.ISupportInitialize)(this.pictureBox2)).BeginInit();
+			this.SuspendLayout();
+			// 
+			// btnHlpAbtOK
+			// 
+			this.btnHlpAbtOK.BackColor = System.Drawing.Color.YellowGreen;
+			this.btnHlpAbtOK.Font = new System.Drawing.Font("Tahoma", 9.75F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.btnHlpAbtOK.Location = new System.Drawing.Point(120, 118);
+			this.btnHlpAbtOK.Name = "btnHlpAbtOK";
+			this.btnHlpAbtOK.Size = new System.Drawing.Size(75, 28);
+			this.btnHlpAbtOK.TabIndex = 0;
+			this.btnHlpAbtOK.Text = "OK";
+			this.btnHlpAbtOK.UseVisualStyleBackColor = false;
+			this.btnHlpAbtOK.Click += new System.EventHandler(this.btnHlpAbtOK_Click);
+			// 
+			// label1
+			// 
+			this.label1.BackColor = System.Drawing.Color.Transparent;
+			this.label1.Font = new System.Drawing.Font("Arial", 12F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.label1.Location = new System.Drawing.Point(73, 28);
+			this.label1.Name = "label1";
+			this.label1.Size = new System.Drawing.Size(216, 14);
+			this.label1.TabIndex = 1;
+			this.label1.Text = "Referenced Object Editor";
+			this.label1.TextAlign = System.Drawing.ContentAlignment.MiddleCenter;
+			// 
+			// label2
+			// 
+			this.label2.BackColor = System.Drawing.Color.Transparent;
+			this.label2.Font = new System.Drawing.Font("Arial", 11.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.label2.Location = new System.Drawing.Point(60, 69);
+			this.label2.Name = "label2";
+			this.label2.Size = new System.Drawing.Size(216, 23);
+			this.label2.TabIndex = 2;
+			this.label2.Text = "Version  4   Release  0";
+			this.label2.TextAlign = System.Drawing.ContentAlignment.MiddleCenter;
+			// 
+			// CopyrightMessage
+			// 
+			this.CopyrightMessage.BackColor = System.Drawing.Color.Transparent;
+			this.CopyrightMessage.Font = new System.Drawing.Font("Arial", 6F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.CopyrightMessage.ImageAlign = System.Drawing.ContentAlignment.MiddleLeft;
+			this.CopyrightMessage.Location = new System.Drawing.Point(0, 159);
+			this.CopyrightMessage.Name = "CopyrightMessage";
+			this.CopyrightMessage.Size = new System.Drawing.Size(207, 14);
+			this.CopyrightMessage.TabIndex = 4;
+			this.CopyrightMessage.Text = "Copyright C  1993 - 2007.   All Rights Reserved.";
+			this.CopyrightMessage.TextAlign = System.Drawing.ContentAlignment.MiddleCenter;
+			// 
+			// pictureBox1
+			// 
+			this.pictureBox1.BackColor = System.Drawing.Color.Transparent;
+			this.pictureBox1.Image = ((System.Drawing.Image)(resources.GetObject("pictureBox1.Image")));
+			this.pictureBox1.Location = new System.Drawing.Point(24, 24);
+			this.pictureBox1.Name = "pictureBox1";
+			this.pictureBox1.Size = new System.Drawing.Size(32, 32);
+			this.pictureBox1.SizeMode = System.Windows.Forms.PictureBoxSizeMode.AutoSize;
+			this.pictureBox1.TabIndex = 5;
+			this.pictureBox1.TabStop = false;
+			// 
+			// pictureBox2
+			// 
+			this.pictureBox2.Image = ((System.Drawing.Image)(resources.GetObject("pictureBox2.Image")));
+			this.pictureBox2.Location = new System.Drawing.Point(227, 104);
+			this.pictureBox2.Name = "pictureBox2";
+			this.pictureBox2.Size = new System.Drawing.Size(70, 32);
+			this.pictureBox2.SizeMode = System.Windows.Forms.PictureBoxSizeMode.AutoSize;
+			this.pictureBox2.TabIndex = 7;
+			this.pictureBox2.TabStop = false;
+			this.pictureBox2.Visible = false;
+			// 
+			// VolianWebLink
+			// 
+			this.VolianWebLink.BackColor = System.Drawing.SystemColors.GrayText;
+			this.VolianWebLink.Font = new System.Drawing.Font("Microsoft Sans Serif", 6F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.VolianWebLink.Location = new System.Drawing.Point(207, 159);
+			this.VolianWebLink.Name = "VolianWebLink";
+			this.VolianWebLink.Size = new System.Drawing.Size(93, 14);
+			this.VolianWebLink.TabIndex = 10;
+			this.VolianWebLink.TabStop = true;
+			this.VolianWebLink.Text = "Volian Enterprises Inc.";
+			this.VolianWebLink.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+			// 
+			// AboutDlg
+			// 
+			this.AutoScaleBaseSize = new System.Drawing.Size(5, 13);
+			this.BackgroundImage = ((System.Drawing.Image)(resources.GetObject("$this.BackgroundImage")));
+			this.ClientSize = new System.Drawing.Size(363, 204);
+			this.Controls.Add(this.VolianWebLink);
+			this.Controls.Add(this.pictureBox2);
+			this.Controls.Add(this.pictureBox1);
+			this.Controls.Add(this.CopyrightMessage);
+			this.Controls.Add(this.label2);
+			this.Controls.Add(this.label1);
+			this.Controls.Add(this.btnHlpAbtOK);
+			this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.FixedToolWindow;
+			this.Icon = ((System.Drawing.Icon)(resources.GetObject("$this.Icon")));
+			this.Name = "AboutDlg";
+			this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
+			this.Text = "About";
+			((System.ComponentModel.ISupportInitialize)(this.pictureBox1)).EndInit();
+			((System.ComponentModel.ISupportInitialize)(this.pictureBox2)).EndInit();
+			this.ResumeLayout(false);
+			this.PerformLayout();
+
+		}
+		#endregion
+
+		private void btnHlpAbtOK_Click(object sender, System.EventArgs e)
+		{
+			this.Close();
+		}
+
+	}
+}

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/AboutROEditor.Designer.cs

@@ -0,0 +1,499 @@
+namespace ROEditor
+{
+	partial class AboutROEditor
+	{
+		/// <summary>
+		/// Required designer variable.
+		/// </summary>
+		private System.ComponentModel.IContainer components = null;
+
+		/// <summary>
+		/// Clean up any resources being used.
+		/// </summary>
+		protected override void Dispose(bool disposing)
+		{
+			if (disposing && (components != null))
+			{
+				components.Dispose();
+			}
+			base.Dispose(disposing);
+		}
+
+		#region Windows Form Designer generated code
+
+		/// <summary>
+		/// Required method for Designer support - do not modify
+		/// the contents of this method with the code editor.
+		/// </summary>
+		private void InitializeComponent()
+		{
+			this.logoPictureBox = new System.Windows.Forms.PictureBox();
+			this.labelProductName = new System.Windows.Forms.Label();
+			this.labelVersion = new System.Windows.Forms.Label();
+			this.labelCopyright = new System.Windows.Forms.Label();
+			this.labelCompanyName = new System.Windows.Forms.LinkLabel();
+			this.textBoxDescription = new System.Windows.Forms.TextBox();
+			this.panel1 = new System.Windows.Forms.Panel();
+			this.panel2 = new System.Windows.Forms.Panel();
+			this.panel3 = new System.Windows.Forms.Panel();
+			this.labelVersionDateTime = new System.Windows.Forms.Label();
+			this.labelServer = new System.Windows.Forms.Label();
+			this.labelDatabase = new System.Windows.Forms.Label();
+			this.panel4 = new System.Windows.Forms.Panel();
+			this.panel5 = new System.Windows.Forms.Panel();
+			this.panel6 = new System.Windows.Forms.Panel();
+			this.panel7 = new System.Windows.Forms.Panel();
+			this.btnEULA = new System.Windows.Forms.Button();
+			this.btnOK = new System.Windows.Forms.Button();
+			((System.ComponentModel.ISupportInitialize)(this.logoPictureBox)).BeginInit();
+			this.panel1.SuspendLayout();
+			this.panel2.SuspendLayout();
+			this.panel3.SuspendLayout();
+			this.panel4.SuspendLayout();
+			this.panel5.SuspendLayout();
+			this.panel6.SuspendLayout();
+			this.panel7.SuspendLayout();
+			this.SuspendLayout();
+			// 
+			// logoPictureBox
+			// 
+			this.logoPictureBox.Cursor = System.Windows.Forms.Cursors.Hand;
+			this.logoPictureBox.Dock = System.Windows.Forms.DockStyle.Fill;
+			this.logoPictureBox.Image = global::ROEditor.Properties.Resources.Red_V_txt_NB_bur_1984;
+			this.logoPictureBox.Location = new System.Drawing.Point(0, 0);
+			this.logoPictureBox.Margin = new System.Windows.Forms.Padding(4);
+			this.logoPictureBox.Name = "logoPictureBox";
+			this.logoPictureBox.Size = new System.Drawing.Size(577, 174);
+			this.logoPictureBox.TabIndex = 25;
+			this.logoPictureBox.TabStop = false;
+			this.logoPictureBox.Click += new System.EventHandler(this.logoPictureBox_Click);
+			// 
+			// labelProductName
+			// 
+			this.labelProductName.Dock = System.Windows.Forms.DockStyle.Top;
+			this.labelProductName.Font = new System.Drawing.Font("Microsoft Sans Serif", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.labelProductName.Location = new System.Drawing.Point(0, 0);
+			this.labelProductName.Margin = new System.Windows.Forms.Padding(8, 0, 4, 0);
+			this.labelProductName.MaximumSize = new System.Drawing.Size(0, 21);
+			this.labelProductName.Name = "labelProductName";
+			this.labelProductName.Size = new System.Drawing.Size(577, 21);
+			this.labelProductName.TabIndex = 19;
+			this.labelProductName.Text = "Referenced Object Editor";
+			this.labelProductName.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+			// 
+			// labelVersion
+			// 
+			this.labelVersion.Dock = System.Windows.Forms.DockStyle.Top;
+			this.labelVersion.Font = new System.Drawing.Font("Microsoft Sans Serif", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.labelVersion.Location = new System.Drawing.Point(0, 0);
+			this.labelVersion.Margin = new System.Windows.Forms.Padding(8, 0, 4, 0);
+			this.labelVersion.MaximumSize = new System.Drawing.Size(0, 21);
+			this.labelVersion.Name = "labelVersion";
+			this.labelVersion.Size = new System.Drawing.Size(577, 21);
+			this.labelVersion.TabIndex = 0;
+			this.labelVersion.Text = "Version 1 Beta Release";
+			this.labelVersion.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+			// 
+			// labelCopyright
+			// 
+			this.labelCopyright.Dock = System.Windows.Forms.DockStyle.Fill;
+			this.labelCopyright.Font = new System.Drawing.Font("Microsoft Sans Serif", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.labelCopyright.Location = new System.Drawing.Point(0, 0);
+			this.labelCopyright.Margin = new System.Windows.Forms.Padding(8, 0, 4, 0);
+			this.labelCopyright.MaximumSize = new System.Drawing.Size(0, 21);
+			this.labelCopyright.Name = "labelCopyright";
+			this.labelCopyright.Size = new System.Drawing.Size(577, 21);
+			this.labelCopyright.TabIndex = 21;
+			this.labelCopyright.Text = "Copyright 2008";
+			this.labelCopyright.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+			// 
+			// labelCompanyName
+			// 
+			this.labelCompanyName.Dock = System.Windows.Forms.DockStyle.Fill;
+			this.labelCompanyName.Font = new System.Drawing.Font("Microsoft Sans Serif", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.labelCompanyName.Location = new System.Drawing.Point(0, 0);
+			this.labelCompanyName.Margin = new System.Windows.Forms.Padding(8, 0, 4, 0);
+			this.labelCompanyName.MaximumSize = new System.Drawing.Size(0, 21);
+			this.labelCompanyName.Name = "labelCompanyName";
+			this.labelCompanyName.Size = new System.Drawing.Size(577, 21);
+			this.labelCompanyName.TabIndex = 22;
+			this.labelCompanyName.TabStop = true;
+			this.labelCompanyName.Text = "Volian Enterprises Inc.";
+			this.labelCompanyName.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+			this.labelCompanyName.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.labelCompanyName_LinkClicked);
+			// 
+			// textBoxDescription
+			// 
+			this.textBoxDescription.Dock = System.Windows.Forms.DockStyle.Fill;
+			this.textBoxDescription.Font = new System.Drawing.Font("Microsoft Sans Serif", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.textBoxDescription.Location = new System.Drawing.Point(0, 0);
+			this.textBoxDescription.Margin = new System.Windows.Forms.Padding(8, 4, 4, 4);
+			this.textBoxDescription.Multiline = true;
+			this.textBoxDescription.Name = "textBoxDescription";
+			this.textBoxDescription.ReadOnly = true;
+			this.textBoxDescription.Size = new System.Drawing.Size(577, 119);
+			this.textBoxDescription.TabIndex = 23;
+			this.textBoxDescription.TabStop = false;
+			this.textBoxDescription.Text = "Thank you for choosing PROMS for your procedure maintenance solution.\r\n\r\nPROMS is" +
+				" protected under the copyright laws.\r\n\r\nPlease refer the the End User Licence Ag" +
+				"reement (EULA) for the terms of use.\r\n";
+			// 
+			// panel1
+			// 
+			this.panel1.Controls.Add(this.logoPictureBox);
+			this.panel1.Dock = System.Windows.Forms.DockStyle.Top;
+			this.panel1.Location = new System.Drawing.Point(12, 11);
+			this.panel1.Margin = new System.Windows.Forms.Padding(3, 2, 3, 2);
+			this.panel1.Name = "panel1";
+			this.panel1.Size = new System.Drawing.Size(577, 174);
+			this.panel1.TabIndex = 26;
+			// 
+			// panel2
+			// 
+			this.panel2.Controls.Add(this.labelProductName);
+			this.panel2.Dock = System.Windows.Forms.DockStyle.Top;
+			this.panel2.Location = new System.Drawing.Point(12, 185);
+			this.panel2.Margin = new System.Windows.Forms.Padding(3, 2, 3, 2);
+			this.panel2.Name = "panel2";
+			this.panel2.Size = new System.Drawing.Size(577, 31);
+			this.panel2.TabIndex = 27;
+			// 
+			// panel3
+			// 
+			this.panel3.Controls.Add(this.labelVersionDateTime);
+			this.panel3.Controls.Add(this.labelServer);
+			this.panel3.Controls.Add(this.labelDatabase);
+			this.panel3.Controls.Add(this.labelVersion);
+			this.panel3.Dock = System.Windows.Forms.DockStyle.Top;
+			this.panel3.Location = new System.Drawing.Point(12, 216);
+			this.panel3.Margin = new System.Windows.Forms.Padding(3, 2, 3, 2);
+			this.panel3.Name = "panel3";
+			this.panel3.Size = new System.Drawing.Size(577, 82);
+			this.panel3.TabIndex = 28;
+			// 
+			// labelVersionDateTime
+			// 
+			this.labelVersionDateTime.Dock = System.Windows.Forms.DockStyle.Bottom;
+			this.labelVersionDateTime.Font = new System.Drawing.Font("Microsoft Sans Serif", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.labelVersionDateTime.Location = new System.Drawing.Point(0, 19);
+			this.labelVersionDateTime.Margin = new System.Windows.Forms.Padding(8, 0, 4, 0);
+			this.labelVersionDateTime.MaximumSize = new System.Drawing.Size(0, 21);
+			this.labelVersionDateTime.Name = "labelVersionDateTime";
+			this.labelVersionDateTime.Size = new System.Drawing.Size(577, 21);
+			this.labelVersionDateTime.TabIndex = 1;
+			this.labelVersionDateTime.Text = "Version Date/Time";
+			this.labelVersionDateTime.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+			// 
+			// labelServer
+			// 
+			this.labelServer.Dock = System.Windows.Forms.DockStyle.Bottom;
+			this.labelServer.Font = new System.Drawing.Font("Microsoft Sans Serif", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.labelServer.Location = new System.Drawing.Point(0, 40);
+			this.labelServer.Margin = new System.Windows.Forms.Padding(8, 0, 4, 0);
+			this.labelServer.MaximumSize = new System.Drawing.Size(0, 21);
+			this.labelServer.Name = "labelServer";
+			this.labelServer.Size = new System.Drawing.Size(577, 21);
+			this.labelServer.TabIndex = 3;
+			this.labelServer.Text = "SQL Server Name";
+			this.labelServer.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+			this.labelServer.Visible = false;
+			// 
+			// labelDatabase
+			// 
+			this.labelDatabase.Dock = System.Windows.Forms.DockStyle.Bottom;
+			this.labelDatabase.Font = new System.Drawing.Font("Microsoft Sans Serif", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.labelDatabase.Location = new System.Drawing.Point(0, 61);
+			this.labelDatabase.Margin = new System.Windows.Forms.Padding(8, 0, 4, 0);
+			this.labelDatabase.MaximumSize = new System.Drawing.Size(0, 21);
+			this.labelDatabase.Name = "labelDatabase";
+			this.labelDatabase.Size = new System.Drawing.Size(577, 21);
+			this.labelDatabase.TabIndex = 2;
+			this.labelDatabase.Text = "Database Name";
+			this.labelDatabase.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+			this.labelDatabase.Visible = false;
+			// 
+			// panel4
+			// 
+			this.panel4.Controls.Add(this.labelCopyright);
+			this.panel4.Dock = System.Windows.Forms.DockStyle.Top;
+			this.panel4.Location = new System.Drawing.Point(12, 298);
+			this.panel4.Margin = new System.Windows.Forms.Padding(3, 2, 3, 2);
+			this.panel4.Name = "panel4";
+			this.panel4.Size = new System.Drawing.Size(577, 28);
+			this.panel4.TabIndex = 29;
+			// 
+			// panel5
+			// 
+			this.panel5.Controls.Add(this.labelCompanyName);
+			this.panel5.Dock = System.Windows.Forms.DockStyle.Top;
+			this.panel5.Location = new System.Drawing.Point(12, 326);
+			this.panel5.Margin = new System.Windows.Forms.Padding(3, 2, 3, 2);
+			this.panel5.Name = "panel5";
+			this.panel5.Size = new System.Drawing.Size(577, 28);
+			this.panel5.TabIndex = 30;
+			// 
+			// panel6
+			// 
+			this.panel6.Controls.Add(this.textBoxDescription);
+			this.panel6.Dock = System.Windows.Forms.DockStyle.Top;
+			this.panel6.Location = new System.Drawing.Point(12, 354);
+			this.panel6.Margin = new System.Windows.Forms.Padding(3, 2, 3, 2);
+			this.panel6.Name = "panel6";
+			this.panel6.Size = new System.Drawing.Size(577, 119);
+			this.panel6.TabIndex = 31;
+			// 
+			// panel7
+			// 
+			this.panel7.Controls.Add(this.btnEULA);
+			this.panel7.Controls.Add(this.btnOK);
+			this.panel7.Dock = System.Windows.Forms.DockStyle.Top;
+			this.panel7.Location = new System.Drawing.Point(12, 473);
+			this.panel7.Margin = new System.Windows.Forms.Padding(3, 2, 3, 2);
+			this.panel7.Name = "panel7";
+			this.panel7.Size = new System.Drawing.Size(577, 47);
+			this.panel7.TabIndex = 32;
+			// 
+			// btnEULA
+			// 
+			this.btnEULA.AccessibleRole = System.Windows.Forms.AccessibleRole.PushButton;
+			this.btnEULA.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Bottom | System.Windows.Forms.AnchorStyles.Right)));
+			this.btnEULA.Font = new System.Drawing.Font("Microsoft Sans Serif", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.btnEULA.Location = new System.Drawing.Point(309, 14);
+			this.btnEULA.Margin = new System.Windows.Forms.Padding(3, 2, 3, 2);
+			this.btnEULA.Name = "btnEULA";
+			this.btnEULA.Size = new System.Drawing.Size(91, 30);
+			this.btnEULA.TabIndex = 27;
+			this.btnEULA.Text = "&View EULA";
+			this.btnEULA.Visible = false;
+			this.btnEULA.Click += new System.EventHandler(this.btnViewEULA_Click);
+			// 
+			// btnOK
+			// 
+			this.btnOK.AccessibleRole = System.Windows.Forms.AccessibleRole.PushButton;
+			this.btnOK.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Bottom | System.Windows.Forms.AnchorStyles.Right)));
+			this.btnOK.DialogResult = System.Windows.Forms.DialogResult.Cancel;
+			this.btnOK.Font = new System.Drawing.Font("Microsoft Sans Serif", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
+			this.btnOK.Location = new System.Drawing.Point(499, 14);
+			this.btnOK.Margin = new System.Windows.Forms.Padding(3, 2, 3, 2);
+			this.btnOK.Name = "btnOK";
+			this.btnOK.Size = new System.Drawing.Size(75, 30);
+			this.btnOK.TabIndex = 26;
+			this.btnOK.Text = "&OK";
+			// 
+			// AboutROEditor
+			// 
+			this.AutoScaleDimensions = new System.Drawing.SizeF(8F, 16F);
+			this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
+			this.BackColor = System.Drawing.SystemColors.ControlLightLight;
+			this.ClientSize = new System.Drawing.Size(601, 529);
+			this.Controls.Add(this.panel7);
+			this.Controls.Add(this.panel6);
+			this.Controls.Add(this.panel5);
+			this.Controls.Add(this.panel4);
+			this.Controls.Add(this.panel3);
+			this.Controls.Add(this.panel2);
+			this.Controls.Add(this.panel1);
+			this.DoubleBuffered = true;
+			this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.FixedDialog;
+			this.Margin = new System.Windows.Forms.Padding(4);
+			this.MaximizeBox = false;
+			this.MinimizeBox = false;
+			this.Name = "AboutROEditor";
+			this.Padding = new System.Windows.Forms.Padding(12, 11, 12, 11);
+			this.ShowIcon = false;
+			this.ShowInTaskbar = false;
+			this.StartPosition = System.Windows.Forms.FormStartPosition.CenterParent;
+			this.Text = "About Proms 2010";
+			((System.ComponentModel.ISupportInitialize)(this.logoPictureBox)).EndInit();
+			this.panel1.ResumeLayout(false);
+			this.panel2.ResumeLayout(false);
+			this.panel3.ResumeLayout(false);
+			this.panel4.ResumeLayout(false);
+			this.panel5.ResumeLayout(false);
+			this.panel6.ResumeLayout(false);
+			this.panel6.PerformLayout();
+			this.panel7.ResumeLayout(false);
+			this.ResumeLayout(false);
+
+		}
+		//private void InitializeComponentORG()
+		//{
+		//    System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(AboutROEditor));
+		//    this.tableLayoutPanel = new System.Windows.Forms.TableLayoutPanel();
+		//    this.logoPictureBox = new System.Windows.Forms.PictureBox();
+		//    this.labelProductName = new System.Windows.Forms.Label();
+		//    this.labelVersion = new System.Windows.Forms.Label();
+		//    this.labelCopyright = new System.Windows.Forms.Label();
+		//    this.labelCompanyName = new System.Windows.Forms.Label();
+		//    this.textBoxDescription = new System.Windows.Forms.TextBox();
+		//    this.okButton = new System.Windows.Forms.Button();
+		//    this.tableLayoutPanel.SuspendLayout();
+		//    ((System.ComponentModel.ISupportInitialize)(this.logoPictureBox)).BeginInit();
+		//    this.SuspendLayout();
+		//    // 
+		//    // tableLayoutPanel
+		//    // 
+		//    this.tableLayoutPanel.ColumnCount = 2;
+		//    this.tableLayoutPanel.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle(System.Windows.Forms.SizeType.Percent, 33F));
+		//    this.tableLayoutPanel.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle(System.Windows.Forms.SizeType.Percent, 67F));
+		//    this.tableLayoutPanel.Controls.Add(this.logoPictureBox, 0, 0);
+		//    this.tableLayoutPanel.Controls.Add(this.labelProductName, 1, 0);
+		//    this.tableLayoutPanel.Controls.Add(this.labelVersion, 1, 1);
+		//    this.tableLayoutPanel.Controls.Add(this.labelCopyright, 1, 2);
+		//    this.tableLayoutPanel.Controls.Add(this.labelCompanyName, 1, 3);
+		//    this.tableLayoutPanel.Controls.Add(this.textBoxDescription, 1, 4);
+		//    this.tableLayoutPanel.Controls.Add(this.okButton, 1, 5);
+		//    this.tableLayoutPanel.Dock = System.Windows.Forms.DockStyle.Fill;
+		//    this.tableLayoutPanel.Location = new System.Drawing.Point(12, 11);
+		//    this.tableLayoutPanel.Margin = new System.Windows.Forms.Padding(4);
+		//    this.tableLayoutPanel.Name = "tableLayoutPanel";
+		//    this.tableLayoutPanel.RowCount = 6;
+		//    this.tableLayoutPanel.RowStyles.Add(new System.Windows.Forms.RowStyle(System.Windows.Forms.SizeType.Percent, 10F));
+		//    this.tableLayoutPanel.RowStyles.Add(new System.Windows.Forms.RowStyle(System.Windows.Forms.SizeType.Percent, 10F));
+		//    this.tableLayoutPanel.RowStyles.Add(new System.Windows.Forms.RowStyle(System.Windows.Forms.SizeType.Percent, 10F));
+		//    this.tableLayoutPanel.RowStyles.Add(new System.Windows.Forms.RowStyle(System.Windows.Forms.SizeType.Percent, 10F));
+		//    this.tableLayoutPanel.RowStyles.Add(new System.Windows.Forms.RowStyle(System.Windows.Forms.SizeType.Percent, 50F));
+		//    this.tableLayoutPanel.RowStyles.Add(new System.Windows.Forms.RowStyle(System.Windows.Forms.SizeType.Percent, 10F));
+		//    this.tableLayoutPanel.Size = new System.Drawing.Size(556, 326);
+		//    this.tableLayoutPanel.TabIndex = 0;
+		//    // 
+		//    // logoPictureBox
+		//    // 
+		//    this.logoPictureBox.Dock = System.Windows.Forms.DockStyle.Fill;
+		//    this.logoPictureBox.Image = ((System.Drawing.Image)(resources.GetObject("logoPictureBox.Image")));
+		//    this.logoPictureBox.Location = new System.Drawing.Point(4, 4);
+		//    this.logoPictureBox.Margin = new System.Windows.Forms.Padding(4);
+		//    this.logoPictureBox.Name = "logoPictureBox";
+		//    this.tableLayoutPanel.SetRowSpan(this.logoPictureBox, 6);
+		//    this.logoPictureBox.Size = new System.Drawing.Size(175, 318);
+		//    this.logoPictureBox.SizeMode = System.Windows.Forms.PictureBoxSizeMode.StretchImage;
+		//    this.logoPictureBox.TabIndex = 12;
+		//    this.logoPictureBox.TabStop = false;
+		//    // 
+		//    // labelProductName
+		//    // 
+		//    this.labelProductName.Dock = System.Windows.Forms.DockStyle.Fill;
+		//    this.labelProductName.Location = new System.Drawing.Point(191, 0);
+		//    this.labelProductName.Margin = new System.Windows.Forms.Padding(8, 0, 4, 0);
+		//    this.labelProductName.MaximumSize = new System.Drawing.Size(0, 21);
+		//    this.labelProductName.Name = "labelProductName";
+		//    this.labelProductName.Size = new System.Drawing.Size(361, 21);
+		//    this.labelProductName.TabIndex = 19;
+		//    this.labelProductName.Text = "Product Name";
+		//    this.labelProductName.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+		//    // 
+		//    // labelVersion
+		//    // 
+		//    this.labelVersion.Dock = System.Windows.Forms.DockStyle.Fill;
+		//    this.labelVersion.Location = new System.Drawing.Point(191, 32);
+		//    this.labelVersion.Margin = new System.Windows.Forms.Padding(8, 0, 4, 0);
+		//    this.labelVersion.MaximumSize = new System.Drawing.Size(0, 21);
+		//    this.labelVersion.Name = "labelVersion";
+		//    this.labelVersion.Size = new System.Drawing.Size(361, 21);
+		//    this.labelVersion.TabIndex = 0;
+		//    this.labelVersion.Text = "Version";
+		//    this.labelVersion.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+		//    // 
+		//    // labelCopyright
+		//    // 
+		//    this.labelCopyright.Dock = System.Windows.Forms.DockStyle.Fill;
+		//    this.labelCopyright.Location = new System.Drawing.Point(191, 64);
+		//    this.labelCopyright.Margin = new System.Windows.Forms.Padding(8, 0, 4, 0);
+		//    this.labelCopyright.MaximumSize = new System.Drawing.Size(0, 21);
+		//    this.labelCopyright.Name = "labelCopyright";
+		//    this.labelCopyright.Size = new System.Drawing.Size(361, 21);
+		//    this.labelCopyright.TabIndex = 21;
+		//    this.labelCopyright.Text = "Copyright";
+		//    this.labelCopyright.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+		//    // 
+		//    // labelCompanyName
+		//    // 
+		//    this.labelCompanyName.Dock = System.Windows.Forms.DockStyle.Fill;
+		//    this.labelCompanyName.Location = new System.Drawing.Point(191, 96);
+		//    this.labelCompanyName.Margin = new System.Windows.Forms.Padding(8, 0, 4, 0);
+		//    this.labelCompanyName.MaximumSize = new System.Drawing.Size(0, 21);
+		//    this.labelCompanyName.Name = "labelCompanyName";
+		//    this.labelCompanyName.Size = new System.Drawing.Size(361, 21);
+		//    this.labelCompanyName.TabIndex = 22;
+		//    this.labelCompanyName.Text = "Company Name";
+		//    this.labelCompanyName.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+		//    // 
+		//    // textBoxDescription
+		//    // 
+		//    this.textBoxDescription.Dock = System.Windows.Forms.DockStyle.Fill;
+		//    this.textBoxDescription.Location = new System.Drawing.Point(191, 132);
+		//    this.textBoxDescription.Margin = new System.Windows.Forms.Padding(8, 4, 4, 4);
+		//    this.textBoxDescription.Multiline = true;
+		//    this.textBoxDescription.Name = "textBoxDescription";
+		//    this.textBoxDescription.ReadOnly = true;
+		//    this.textBoxDescription.ScrollBars = System.Windows.Forms.ScrollBars.Both;
+		//    this.textBoxDescription.Size = new System.Drawing.Size(361, 155);
+		//    this.textBoxDescription.TabIndex = 23;
+		//    this.textBoxDescription.TabStop = false;
+		//    this.textBoxDescription.Text = "Description";
+		//    // 
+		//    // okButton
+		//    // 
+		//    this.okButton.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Bottom | System.Windows.Forms.AnchorStyles.Right)));
+		//    this.okButton.DialogResult = System.Windows.Forms.DialogResult.Cancel;
+		//    this.okButton.Location = new System.Drawing.Point(452, 295);
+		//    this.okButton.Margin = new System.Windows.Forms.Padding(4);
+		//    this.okButton.Name = "okButton";
+		//    this.okButton.Size = new System.Drawing.Size(100, 27);
+		//    this.okButton.TabIndex = 24;
+		//    this.okButton.Text = "&OK";
+		//    // 
+		//    // AboutROEditor
+		//    // 
+		//    this.AcceptButton = this.okButton;
+		//    this.AutoScaleDimensions = new System.Drawing.SizeF(8F, 16F);
+		//    this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
+		//    this.ClientSize = new System.Drawing.Size(580, 348);
+		//    this.Controls.Add(this.tableLayoutPanel);
+		//    this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.FixedDialog;
+		//    this.Margin = new System.Windows.Forms.Padding(4);
+		//    this.MaximizeBox = false;
+		//    this.MinimizeBox = false;
+		//    this.Name = "AboutROEditor";
+		//    this.Padding = new System.Windows.Forms.Padding(12, 11, 12, 11);
+		//    this.ShowIcon = false;
+		//    this.ShowInTaskbar = false;
+		//    this.StartPosition = System.Windows.Forms.FormStartPosition.CenterParent;
+		//    this.Text = "AboutROEditor";
+		//    this.tableLayoutPanel.ResumeLayout(false);
+		//    this.tableLayoutPanel.PerformLayout();
+		//    ((System.ComponentModel.ISupportInitialize)(this.logoPictureBox)).EndInit();
+		//    this.ResumeLayout(false);
+
+		//}
+
+		#endregion
+
+		//private System.Windows.Forms.TableLayoutPanel tableLayoutPanel;
+		//private System.Windows.Forms.PictureBox logoPictureBox;
+		//private System.Windows.Forms.Label labelProductName;
+		//private System.Windows.Forms.Label labelVersion;
+		//private System.Windows.Forms.Label labelCopyright;
+		//private System.Windows.Forms.Label labelCompanyName;
+		//private System.Windows.Forms.TextBox textBoxDescription;
+		//private System.Windows.Forms.Button okButton;
+		private System.Windows.Forms.Label labelProductName;
+		private System.Windows.Forms.Label labelVersion;
+		private System.Windows.Forms.Label labelCopyright;
+		private System.Windows.Forms.LinkLabel labelCompanyName;
+		private System.Windows.Forms.TextBox textBoxDescription;
+		private System.Windows.Forms.PictureBox logoPictureBox;
+		private System.Windows.Forms.Panel panel1;
+		private System.Windows.Forms.Panel panel2;
+		private System.Windows.Forms.Panel panel3;
+		private System.Windows.Forms.Panel panel4;
+		private System.Windows.Forms.Panel panel5;
+		private System.Windows.Forms.Panel panel6;
+		private System.Windows.Forms.Panel panel7;
+		private System.Windows.Forms.Button btnOK;
+		private System.Windows.Forms.Button btnEULA;
+		private System.Windows.Forms.Label labelVersionDateTime;
+		private System.Windows.Forms.Label labelServer;
+		private System.Windows.Forms.Label labelDatabase;
+	}
+}

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/AboutROEditor.cs

@@ -0,0 +1,166 @@
+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Drawing;
+using System.Windows.Forms;
+using System.Reflection;
+
+namespace ROEditor
+{
+	partial class AboutROEditor : Form
+	{
+		public AboutROEditor()
+		{
+			InitializeComponent();
+
+			//  Initialize the AboutBox to display the product information from the assembly information.
+			//  Change assembly information settings for your application through either:
+			//  - Project->Properties->Application->Assembly Information
+			//  - AssemblyInfo.cs
+			//this.Text = String.Format("About {0}", AssemblyTitle);
+			//this.labelProductName.Text = AssemblyProduct;
+			//this.labelVersion.Text = String.Format("Version {0}", AssemblyVersion);
+			//this.labelCopyright.Text = AssemblyCopyright;
+			//this.labelCompanyName.Text = AssemblyCompany;
+			//this.textBoxDescription.Text = AssemblyDescription;
+			
+						//  Initialize the AboutBox to display the product information from the assembly information.
+			//  Change assembly information settings for your application through either:
+			//  - Project->Properties->Application->Assembly Information
+			//  - AssemblyInfo.cs
+			DateTime buildDateTime = new System.IO.FileInfo(Assembly.GetExecutingAssembly().Location).LastWriteTime;
+			// If the AssemblyConfiguration is "DEMO" then we are running a Demo version
+			string demoTxt = "";//VlnSettings.ReleaseMode.Equals("DEMO")?"(Demo)": "";
+			//string connectionString = Database.VEPROMS_Connection;
+			//Match mServer = Regex.Match(connectionString,".*Data Source=([^;]*).*");
+			//string server = (mServer.Success)?mServer.Groups[1].Value:"unknown";
+			//if (server.StartsWith(@".\")) server = @"Local \ " + server.Substring(2);
+			//string databaseName = Database.SelectedDatabase;
+			this.Text = String.Format("About {0}", AssemblyTitle + " " + demoTxt);
+			this.labelProductName.Text = AssemblyProduct;
+			this.labelVersion.Text = String.Format("Version {0}", (demoTxt.Equals(""))? AssemblyVersion : demoTxt);
+			this.labelVersionDateTime.Text = String.Format("Build Date:  {0}", buildDateTime.ToString());
+			this.labelCopyright.Text = String.Format("Copyright <20> {0}. All Rights Reserved.", buildDateTime.Year.ToString());
+			this.labelCompanyName.Text = AssemblyCompany;
+//			this.textBoxDescription.Text = AssemblyDescription;
+			this.labelCompanyName.Links[0].LinkData = "Volian Enterprises Inc.";
+			this.labelCompanyName.Links.Add(0,23,"www.volian.com");
+			//this.labelServer.Text = string.Format("SQL Server: {0}", server);
+			//this.labelDatabase.Text = string.Format("Database: {0}", databaseName);
+
+		}
+
+		#region Assembly Attribute Accessors
+
+		public string AssemblyTitle
+		{
+			get
+			{
+				// Get all Title attributes on this assembly
+				object[] attributes = Assembly.GetExecutingAssembly().GetCustomAttributes(typeof(AssemblyTitleAttribute), false);
+				// If there is at least one Title attribute
+				if (attributes.Length > 0)
+				{
+					// Select the first one
+					AssemblyTitleAttribute titleAttribute = (AssemblyTitleAttribute)attributes[0];
+					// If it is not an empty string, return it
+					if (titleAttribute.Title != "")
+						return titleAttribute.Title;
+				}
+				// If there was no Title attribute, or if the Title attribute was the empty string, return the .exe name
+				return System.IO.Path.GetFileNameWithoutExtension(Assembly.GetExecutingAssembly().CodeBase);
+			}
+		}
+
+		public string AssemblyVersion
+		{
+			get
+			{
+				return Assembly.GetExecutingAssembly().GetName().Version.ToString();
+			}
+		}
+
+		public string AssemblyDescription
+		{
+			get
+			{
+				// Get all Description attributes on this assembly
+				object[] attributes = Assembly.GetExecutingAssembly().GetCustomAttributes(typeof(AssemblyDescriptionAttribute), false);
+				// If there aren't any Description attributes, return an empty string
+				if (attributes.Length == 0)
+					return "";
+				// If there is a Description attribute, return its value
+				return ((AssemblyDescriptionAttribute)attributes[0]).Description;
+			}
+		}
+
+		public string AssemblyProduct
+		{
+			get
+			{
+				// Get all Product attributes on this assembly
+				object[] attributes = Assembly.GetExecutingAssembly().GetCustomAttributes(typeof(AssemblyProductAttribute), false);
+				// If there aren't any Product attributes, return an empty string
+				if (attributes.Length == 0)
+					return "";
+				// If there is a Product attribute, return its value
+				return ((AssemblyProductAttribute)attributes[0]).Product;
+			}
+		}
+
+		//public string AssemblyCopyright
+		//{
+		//	get
+		//	{
+		//		// Get all Copyright attributes on this assembly
+		//		object[] attributes = Assembly.GetExecutingAssembly().GetCustomAttributes(typeof(AssemblyCopyrightAttribute), false);
+		//		// If there aren't any Copyright attributes, return an empty string
+		//		if (attributes.Length == 0)
+		//			return "";
+		//		// If there is a Copyright attribute, return its value
+		//		return ((AssemblyCopyrightAttribute)attributes[0]).Copyright;
+		//	}
+		//}
+
+		public string AssemblyCompany
+		{
+			get
+			{
+				// Get all Company attributes on this assembly
+				object[] attributes = Assembly.GetExecutingAssembly().GetCustomAttributes(typeof(AssemblyCompanyAttribute), false);
+				// If there aren't any Company attributes, return an empty string
+				if (attributes.Length == 0)
+					return "";
+				// If there is a Company attribute, return its value
+				return ((AssemblyCompanyAttribute)attributes[0]).Company;
+			}
+		}
+		#endregion
+				private void labelCompanyName_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)
+		{
+			// Determine which link was clicked within the LinkLabel.
+			this.labelCompanyName.Links[0].Visited = true;
+
+			// Display the appropriate link based on the value of the 
+			// LinkData property of the Link object.
+			string target = e.Link.LinkData as string;
+
+			System.Diagnostics.Process.Start(target); // this should start the default web browser
+		}
+
+		private void logoPictureBox_Click(object sender, EventArgs e)
+		{
+			System.Diagnostics.Process.Start(labelCompanyName.Links[0].LinkData as string); // this should start the default web browser
+		}
+
+		private void btnViewEULA_Click(object sender, EventArgs e)
+		{
+			//string EulaFile = string.Format(@"\{0}", VlnSettings.EULAfile);
+			//string strEULA = System.Environment.CurrentDirectory + EulaFile;
+			//frmViewTextFile ViewFile = new frmViewTextFile(strEULA,RichTextBoxStreamType.PlainText);
+			//ViewFile.Text = "End-User License Agreement";
+			//ViewFile.ShowDialog();
+		}
+
+	}
+}

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/AboutROEditor.resx

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/AssemblyInfo.cs

@@ -0,0 +1,69 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("RO Editor")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Volian Enterprises Inc.")]
+[assembly: AssemblyProduct("Referenced Objects Editor")]
+[assembly: AssemblyCopyright("2013")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build YYMM (two digit year, two digit month)
+//      Revision DHH (day - no leading zero, two digit hour - military time
+//
+[assembly: AssemblyVersion("1.0.1303.2513")]
+[assembly: AssemblyFileVersion("1.0.1303.2513")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/AssemblyInfo.cs.bak

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("E:\\proms.net\\Public Key\\vlnkey.snk")]
+[assembly: AssemblyKeyName("")]

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/FieldCombFrm.cs

@@ -0,0 +1,588 @@
+/*********************************************************************************************
+ * Copyright 2002 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: FieldCombFrm.cs $     $Revision: 12 $
+ * $Author: Kathy $   $Date: 5/21/03 12:45p $
+ *
+ * $History: FieldCombFrm.cs $
+ * 
+ * *****************  Version 12  *****************
+ * User: Kathy        Date: 5/21/03    Time: 12:45p
+ * Updated in $/EXE/RefObj/ROEditor
+ * B2003-041: edit field name not always set
+ * 
+ * *****************  Version 11  *****************
+ * User: Kathy        Date: 12/11/02   Time: 11:22a
+ * Updated in $/EXE/RefObj/ROEditor
+ * fixed - was always putting up Variable field, even if not defined
+ * 
+ * *****************  Version 10  *****************
+ * User: Kathy        Date: 12/10/02   Time: 2:25p
+ * Updated in $/EXE/RefObj/ROEditor
+ * fieldname special chars
+ * 
+ * *****************  Version 9  *****************
+ * User: Kathy        Date: 12/02/02   Time: 8:29a
+ * Updated in $/EXE/RefObj/ROEditor
+ * fieldname replace chars
+ * 
+ * *****************  Version 8  *****************
+ * User: Kathy        Date: 12/02/02   Time: 6:13a
+ * Updated in $/EXE/RefObj/ROEditor
+ * combo field fix
+ * 
+ * *****************  Version 7  *****************
+ * User: Kathy        Date: 10/15/02   Time: 2:17p
+ * Updated in $/EXE/RefObj/ROEditor
+ * wasn't finding variable text
+ * 
+ * *****************  Version 6  *****************
+ * User: Kathy        Date: 9/27/02    Time: 1:13p
+ * Updated in $/EXE/RefObj/ROEditor
+ * fix digit as first char in fieldname
+ * 
+ * *****************  Version 5  *****************
+ * User: Kathy        Date: 9/25/02    Time: 2:30p
+ * Updated in $/EXE/RefObj/ROEditor
+ * multitxt->variabletxt
+ * 
+ * *****************  Version 4  *****************
+ * User: Kathy        Date: 9/25/02    Time: 9:56a
+ * Updated in $/EXE/RefObj/ROEditor
+ * dev
+ * 
+ * *****************  Version 3  *****************
+ * User: Kathy        Date: 9/11/02    Time: 1:15p
+ * Updated in $/EXE/RefObj/ROEditor
+ * vlnxml
+ * 
+ * *****************  Version 2  *****************
+ * User: Kathy        Date: 9/05/02    Time: 12:41p
+ * Updated in $/EXE/RefObj/ROEditor
+ * dev
+ * 
+ * *****************  Version 1  *****************
+ * User: Jsj          Date: 8/23/02    Time: 3:33p
+ * Created in $/EXE/RefObj/ROEditor
+ *********************************************************************************************/
+
+using System;
+using System.Drawing;
+using System.Collections;
+using System.ComponentModel;
+using System.Windows.Forms;
+using System.Xml;
+using System.Xml.Schema;
+using System.Text;
+using ROFields;
+using RODBInterface;
+
+namespace ROEditor
+{
+	/// <summary>
+	/// Summary description for FieldCombFrm.
+	/// </summary>
+	public class FieldCombFrm : System.Windows.Forms.Form
+	{
+		private System.Windows.Forms.Label lblFieldName;
+		private System.Windows.Forms.TextBox tbFieldName;
+		private System.Windows.Forms.GroupBox gbAlternatives;
+		private System.Windows.Forms.CheckBox cbSingleTxt;
+		private System.Windows.Forms.CheckBox cbVariableTxt;
+		private System.Windows.Forms.CheckBox cbTable;
+		private System.Windows.Forms.CheckBox cbXYPlot;
+		private System.Windows.Forms.Label lblW1;
+		private System.Windows.Forms.Label lblW2;
+		private System.Windows.Forms.Label lblW3;
+		private System.Windows.Forms.Label lblW4;
+		private System.Windows.Forms.TextBox tbSingleTxtWid;
+		private System.Windows.Forms.TextBox tbVariableTxtWid;
+		private System.Windows.Forms.TextBox tbTableWid;
+		private System.Windows.Forms.TextBox tbXYPlotWid;
+		private System.Windows.Forms.Button btnOK;
+		private System.Windows.Forms.Button btnCancel;
+		/// <summary>
+		/// Required designer variable.
+		/// </summary>
+		private System.ComponentModel.Container components = null;
+		private ROField myrof;
+		private RODB myrodb; 
+		private VlnXmlElement myelem;
+		private string origname;
+		private int origFixedLength=0;
+		private int origVariableTxtLength = 0;
+		private int origTableLength = 0;
+		private int origXYPlotLength = 0;
+		private ArrayList avail_list;
+		private ArrayList inuse_list;
+		private uint editlevel;
+		private bool exists = false;
+		public FieldCombFrm(ROField rof, RODB rodb, VlnXmlElement elem, uint elevel, string oname, ArrayList alist, ArrayList ilist)
+		{
+			int idx;
+			string strlen;
+			string fielddef;
+			//
+			// Required for Windows Form Designer support
+			//
+			myrof = rof;
+			myrodb = rodb;
+			myelem = elem;
+			editlevel = elevel;
+			avail_list = alist;
+			inuse_list = ilist;
+			InitializeComponent();
+			this.tbFieldName.Text = rof.GetFieldname;
+			origname = oname;
+
+			if (rof.GetRecID != null) // it's new if it's null
+			{
+				exists = true;
+				string recid = rof.GetMasterRecID;
+				if (recid != null && recid != "")
+					fielddef = myrodb.RODB_GetSchemaPiece(recid,"ROMaster");
+				else
+					fielddef = myrodb.RODB_GetSchemaPiece(rof.GetRecID,myelem.GetAttribute("Table"));
+				// search for combination items included & their original length.
+				idx = fielddef.IndexOf("Fixed");
+				if (idx >= 0) 
+				{
+					idx=fielddef.IndexOf("xsd:maxLength value=\"",idx);
+					strlen = fielddef.Substring(idx+21,2);
+					origFixedLength = System.Convert.ToInt32(strlen);
+					this.tbSingleTxtWid.Text = strlen;
+					this.cbSingleTxt.Checked = true;
+				}
+				else
+					this.cbSingleTxt.Checked = false;
+				idx = fielddef.IndexOf("type=\"Variable");
+				if (idx >= 0) 
+				{
+					idx=fielddef.IndexOf("xsd:maxLength value=\"",idx);
+					strlen = fielddef.Substring(idx+21,2);
+					origVariableTxtLength = System.Convert.ToInt32(strlen);
+					this.tbVariableTxtWid.Text = strlen;
+					this.cbVariableTxt.Checked = true;
+				}
+				else
+					this.cbVariableTxt.Checked = false;
+				idx = fielddef.IndexOf("Table");
+				if (idx >= 0) 
+				{
+					idx=fielddef.IndexOf("xsd:maxLength value=\"",idx);
+					strlen = fielddef.Substring(idx+21,2);
+					origTableLength = System.Convert.ToInt32(strlen);
+					this.tbTableWid.Text = strlen;
+					this.cbTable.Checked = true;
+				}
+				else
+					this.cbTable.Checked = false;
+				idx = fielddef.IndexOf("XYPlot");
+				if (idx >= 0) 
+				{
+					idx=fielddef.IndexOf("xsd:maxLength value=\"",idx);
+					strlen = fielddef.Substring(idx+21,2);
+					origXYPlotLength = System.Convert.ToInt32(strlen);
+					this.tbXYPlotWid.Text = strlen;
+					this.cbXYPlot.Checked = true;
+				}
+				else
+					this.cbXYPlot.Checked = false;
+			}
+
+		}
+
+		/// <summary>
+		/// Clean up any resources being used.
+		/// </summary>
+		protected override void Dispose( bool disposing )
+		{
+			if( disposing )
+			{
+				if(components != null)
+				{
+					components.Dispose();
+				}
+			}
+			base.Dispose( disposing );
+		}
+
+		#region Windows Form Designer generated code
+		/// <summary>
+		/// Required method for Designer support - do not modify
+		/// the contents of this method with the code editor.
+		/// </summary>
+		private void InitializeComponent()
+		{
+			this.lblFieldName = new System.Windows.Forms.Label();
+			this.tbFieldName = new System.Windows.Forms.TextBox();
+			this.gbAlternatives = new System.Windows.Forms.GroupBox();
+			this.tbXYPlotWid = new System.Windows.Forms.TextBox();
+			this.tbTableWid = new System.Windows.Forms.TextBox();
+			this.tbVariableTxtWid = new System.Windows.Forms.TextBox();
+			this.tbSingleTxtWid = new System.Windows.Forms.TextBox();
+			this.lblW4 = new System.Windows.Forms.Label();
+			this.lblW3 = new System.Windows.Forms.Label();
+			this.lblW2 = new System.Windows.Forms.Label();
+			this.lblW1 = new System.Windows.Forms.Label();
+			this.cbXYPlot = new System.Windows.Forms.CheckBox();
+			this.cbTable = new System.Windows.Forms.CheckBox();
+			this.cbVariableTxt = new System.Windows.Forms.CheckBox();
+			this.cbSingleTxt = new System.Windows.Forms.CheckBox();
+			this.btnOK = new System.Windows.Forms.Button();
+			this.btnCancel = new System.Windows.Forms.Button();
+			this.gbAlternatives.SuspendLayout();
+			this.SuspendLayout();
+			// 
+			// lblFieldName
+			// 
+			this.lblFieldName.Location = new System.Drawing.Point(16, 8);
+			this.lblFieldName.Name = "lblFieldName";
+			this.lblFieldName.Size = new System.Drawing.Size(72, 16);
+			this.lblFieldName.TabIndex = 0;
+			this.lblFieldName.Text = "Field Name:";
+			// 
+			// tbFieldName
+			// 
+			this.tbFieldName.Location = new System.Drawing.Point(96, 8);
+			this.tbFieldName.Name = "tbFieldName";
+			this.tbFieldName.Size = new System.Drawing.Size(384, 22);
+			this.tbFieldName.TabIndex = 1;
+			this.tbFieldName.Text = "";
+			// 
+			// gbAlternatives
+			// 
+			this.gbAlternatives.Controls.AddRange(new System.Windows.Forms.Control[] {
+																						 this.tbXYPlotWid,
+																						 this.tbTableWid,
+																						 this.tbVariableTxtWid,
+																						 this.tbSingleTxtWid,
+																						 this.lblW4,
+																						 this.lblW3,
+																						 this.lblW2,
+																						 this.lblW1,
+																						 this.cbXYPlot,
+																						 this.cbTable,
+																						 this.cbVariableTxt,
+																						 this.cbSingleTxt});
+			this.gbAlternatives.Location = new System.Drawing.Point(16, 48);
+			this.gbAlternatives.Name = "gbAlternatives";
+			this.gbAlternatives.Size = new System.Drawing.Size(464, 152);
+			this.gbAlternatives.TabIndex = 2;
+			this.gbAlternatives.TabStop = false;
+			this.gbAlternatives.Text = "Alternatives";
+			// 
+			// tbXYPlotWid
+			// 
+			this.tbXYPlotWid.Location = new System.Drawing.Point(320, 120);
+			this.tbXYPlotWid.Name = "tbXYPlotWid";
+			this.tbXYPlotWid.Size = new System.Drawing.Size(40, 22);
+			this.tbXYPlotWid.TabIndex = 11;
+			this.tbXYPlotWid.Text = "";
+			// 
+			// tbTableWid
+			// 
+			this.tbTableWid.Location = new System.Drawing.Point(320, 88);
+			this.tbTableWid.Name = "tbTableWid";
+			this.tbTableWid.Size = new System.Drawing.Size(40, 22);
+			this.tbTableWid.TabIndex = 10;
+			this.tbTableWid.Text = "";
+			// 
+			// tbVariableTxtWid
+			// 
+			this.tbVariableTxtWid.Location = new System.Drawing.Point(320, 56);
+			this.tbVariableTxtWid.Name = "tbVariableTxtWid";
+			this.tbVariableTxtWid.Size = new System.Drawing.Size(40, 22);
+			this.tbVariableTxtWid.TabIndex = 9;
+			this.tbVariableTxtWid.Text = "";
+			// 
+			// tbSingleTxtWid
+			// 
+			this.tbSingleTxtWid.Location = new System.Drawing.Point(320, 24);
+			this.tbSingleTxtWid.Name = "tbSingleTxtWid";
+			this.tbSingleTxtWid.Size = new System.Drawing.Size(40, 22);
+			this.tbSingleTxtWid.TabIndex = 8;
+			this.tbSingleTxtWid.Text = "";
+			// 
+			// lblW4
+			// 
+			this.lblW4.Location = new System.Drawing.Point(264, 120);
+			this.lblW4.Name = "lblW4";
+			this.lblW4.Size = new System.Drawing.Size(56, 16);
+			this.lblW4.TabIndex = 7;
+			this.lblW4.Text = "Width:";
+			// 
+			// lblW3
+			// 
+			this.lblW3.Location = new System.Drawing.Point(264, 96);
+			this.lblW3.Name = "lblW3";
+			this.lblW3.Size = new System.Drawing.Size(56, 16);
+			this.lblW3.TabIndex = 6;
+			this.lblW3.Text = "Width:";
+			// 
+			// lblW2
+			// 
+			this.lblW2.Location = new System.Drawing.Point(264, 64);
+			this.lblW2.Name = "lblW2";
+			this.lblW2.Size = new System.Drawing.Size(56, 16);
+			this.lblW2.TabIndex = 5;
+			this.lblW2.Text = "Width:";
+			// 
+			// lblW1
+			// 
+			this.lblW1.Location = new System.Drawing.Point(264, 32);
+			this.lblW1.Name = "lblW1";
+			this.lblW1.Size = new System.Drawing.Size(56, 16);
+			this.lblW1.TabIndex = 4;
+			this.lblW1.Text = "Width:";
+			// 
+			// cbXYPlot
+			// 
+			this.cbXYPlot.Location = new System.Drawing.Point(16, 120);
+			this.cbXYPlot.Name = "cbXYPlot";
+			this.cbXYPlot.Size = new System.Drawing.Size(144, 24);
+			this.cbXYPlot.TabIndex = 3;
+			this.cbXYPlot.Text = "X/Y Plot";
+			// 
+			// cbTable
+			// 
+			this.cbTable.Location = new System.Drawing.Point(16, 88);
+			this.cbTable.Name = "cbTable";
+			this.cbTable.Size = new System.Drawing.Size(144, 24);
+			this.cbTable.TabIndex = 2;
+			this.cbTable.Text = "Table";
+			// 
+			// cbVariableTxt
+			// 
+			this.cbVariableTxt.Location = new System.Drawing.Point(16, 56);
+			this.cbVariableTxt.Name = "cbVariableTxt";
+			this.cbVariableTxt.Size = new System.Drawing.Size(144, 24);
+			this.cbVariableTxt.TabIndex = 1;
+			this.cbVariableTxt.Text = "Variable Line Text";
+			// 
+			// cbSingleTxt
+			// 
+			this.cbSingleTxt.Location = new System.Drawing.Point(16, 24);
+			this.cbSingleTxt.Name = "cbSingleTxt";
+			this.cbSingleTxt.Size = new System.Drawing.Size(144, 24);
+			this.cbSingleTxt.TabIndex = 0;
+			this.cbSingleTxt.Text = "Single Line Text";
+			// 
+			// btnOK
+			// 
+			this.btnOK.Location = new System.Drawing.Point(264, 216);
+			this.btnOK.Name = "btnOK";
+			this.btnOK.Size = new System.Drawing.Size(88, 24);
+			this.btnOK.TabIndex = 3;
+			this.btnOK.Text = "OK";
+			this.btnOK.Click += new System.EventHandler(this.btnOK_Click);
+			// 
+			// btnCancel
+			// 
+			this.btnCancel.DialogResult = System.Windows.Forms.DialogResult.Cancel;
+			this.btnCancel.Location = new System.Drawing.Point(392, 216);
+			this.btnCancel.Name = "btnCancel";
+			this.btnCancel.Size = new System.Drawing.Size(88, 24);
+			this.btnCancel.TabIndex = 4;
+			this.btnCancel.Text = "Cancel";
+			// 
+			// FieldCombFrm
+			// 
+			this.AutoScaleBaseSize = new System.Drawing.Size(6, 15);
+			this.ClientSize = new System.Drawing.Size(504, 253);
+			this.Controls.AddRange(new System.Windows.Forms.Control[] {
+																		  this.btnCancel,
+																		  this.btnOK,
+																		  this.gbAlternatives,
+																		  this.tbFieldName,
+																		  this.lblFieldName});
+			this.Font = new System.Drawing.Font("Tahoma", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.Name = "FieldCombFrm";
+			this.Text = "Combination Field Definition";
+			this.gbAlternatives.ResumeLayout(false);
+			this.ResumeLayout(false);
+
+		}
+		#endregion
+
+		private string CvtUserFldToFld(string fldname)
+		{
+			if (fldname.Length < 2)
+				return fldname;
+			// a digit cannot start an xml fieldname, prepend a "__" to it.
+			string tmp0;
+			if (char.IsDigit(fldname,0))
+				tmp0 = "__" + fldname;
+			else
+				tmp0 = fldname;
+			// an xml fieldname cannot have a space, change it to a "__"
+			string tmpstr = tmp0.Replace(" ","__");
+			int len = tmpstr.Length;
+			int cnt = 0;
+
+			// this is also our sequence that tells us the follow 3 digits is the ascii number (base 10)
+			// of the character we replaced.
+			string OKpunch = "-._"; 
+
+			string outstr = "";
+			int decval;
+
+			while (cnt < len)
+			{
+				char tmpchr = tmpstr[cnt];
+				if(!char.IsLetterOrDigit(tmpchr)&& (OKpunch.IndexOf(tmpchr) == -1) )
+				{
+					decval = tmpchr;
+					outstr += OKpunch + decval.ToString("D3");
+				}
+				else
+				{
+					outstr += tmpchr.ToString();
+				}
+				cnt++;
+			}
+			return outstr;
+		}
+
+		private bool CheckValidWidth(string wid)
+		{
+			long val;
+			try 
+			{
+				// Attempt to convert to long, if it fails, there are problems in the text
+				val = System.Convert.ToInt64(wid);
+			}
+			catch 
+			{
+				MessageBox.Show("The field width is not a valid number. Please re-enter");
+				return false;
+			}
+			return true;
+		}
+
+		private void btnOK_Click(object sender, System.EventArgs e)
+		{
+			string savschemapiece;
+			bool success=false;
+
+			// check for field validity
+			if (this.tbFieldName.Text == null)
+			{
+				MessageBox.Show("Cannot have empty field definition name.");
+				return;
+			}
+
+			if (this.cbSingleTxt.Checked == true && this.tbSingleTxtWid.Text == null)
+			{
+				MessageBox.Show("Cannot have empty width for Single Line Text");
+				return;
+			}
+			if (this.cbSingleTxt.Checked == true) 
+			{
+				success=CheckValidWidth(this.tbSingleTxtWid.Text);
+				if (success == false) return;
+			}
+
+			if (this.cbVariableTxt.Checked == true && this.tbVariableTxtWid.Text == null)
+			{
+				MessageBox.Show("Cannot have empty width for Variable Length Text");
+				return;
+			}
+			if (this.cbVariableTxt.Checked == true)
+			{
+				success=CheckValidWidth(this.tbSingleTxtWid.Text);
+				if (success == false) return;
+			}
+
+			if (this.cbTable.Checked == true && this.tbTableWid.Text == null)
+			{
+				MessageBox.Show("Cannot have empty width for Table Text");
+				return;
+			}
+			if (this.cbTable.Checked == true)
+			{
+				success=CheckValidWidth(this.tbTableWid.Text);
+				if (success == false) return;
+			}
+
+			if (this.cbXYPlot.Checked == true && this.tbXYPlotWid.Text == null)
+			{
+				MessageBox.Show("Cannot have empty width for XYPlot Text");
+				return;
+			}
+			if (this.cbXYPlot.Checked == true)
+			{
+				success=CheckValidWidth(this.tbXYPlotWid.Text);
+				if (success == false) return;
+			}
+
+			// check that it is not duplicate name.
+			ROField rof;
+			for (int i=0; i< avail_list.Count; i++)
+			{
+				rof = (ROField) avail_list[i];
+				if (rof.GetFieldname == this.tbFieldName.Text && rof.GetRecID != myrof.GetRecID)
+				{
+					MessageBox.Show("The field name is not unique. Please re-enter");
+					return;
+				}
+			}
+			for (int i=0; i< inuse_list.Count; i++)
+			{
+				rof = (ROField) inuse_list[i];
+				if (rof.GetFieldname == this.tbFieldName.Text && rof.GetRecID != myrof.GetRecID)
+				{
+					MessageBox.Show("The field name is not unique. Please re-enter");
+					return;
+				}
+			}
+
+			// generate the new schema string based on text box input.
+			string fname=CvtUserFldToFld(this.tbFieldName.Text);
+			savschemapiece = myrof.MakeComboSchemaString(fname, this.cbSingleTxt.Checked, 
+				this.tbSingleTxtWid.Text, this.cbVariableTxt.Checked, this.tbVariableTxtWid.Text, 
+				this.cbTable.Checked, this.tbTableWid.Text, this.cbXYPlot.Checked, this.tbXYPlotWid.Text);
+			myrof.SetFieldname(fname);
+			// if this is 'new'. create a new element and do an insert to database
+			if (exists == false) 
+				success = myrodb.RODB_NewFieldRecord(myrof, myelem, savschemapiece, editlevel, "a");
+			else     // modification of existing...
+				success = myrodb.RODB_UpdateFieldRecord(myrof, myelem, savschemapiece, CvtUserFldToFld(origname), fname, editlevel, true);
+
+			// update the local/internal copy of the schema.
+			if (success != true)
+			{
+				return; // DO YET process an error.
+			}
+			else		 
+			{
+				// if this is a RRO schema, reload. We're not reloading the group schema
+				// because it is rarely used and is only loaded as needed.
+				if (editlevel == (uint) RecordType.Schema)
+				{
+					XmlSchema myschema;
+					VlnXmlElement parent;
+					parent = myelem;
+					while (parent != null)
+					{
+						if (parent.HasAttribute("Schema") == true) break;
+						if (parent.HasAttribute("FieldsInUse") == true) break;
+						parent = (VlnXmlElement) parent.ParentNode;
+					}
+					// if a schema has been read in, delete it and reread it.
+					if (parent.HasAttribute("Schema"))
+					{
+						// delete this attribute because we'll reread it in.
+						parent.RemoveAttribute("Schema");
+						myschema = myrodb.RODB_GetSchema(myelem);
+					}
+				}
+
+			}
+			
+			
+			this.Close();
+		}
+	}
+}

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/FieldCombFrm.resx

@@ -0,0 +1,102 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+            Microsoft ResX Schema 
+        
+            Version 1.3
+                
+            The primary goals of this format is to allow a simple XML format 
+            that is mostly human readable. The generation and parsing of the 
+            various data types are done through the TypeConverter classes 
+            associated with the data types.
+        
+            Example:
+        
+                ... ado.net/XML headers & schema ...
+                <resheader name="resmimetype">text/microsoft-resx</resheader>
+                <resheader name="version">1.3</resheader>
+                <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+                <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+                <data name="Name1">this is my long string</data>
+                <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+                <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+                    [base64 mime encoded serialized .NET Framework object]
+                </data>
+                <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+                    [base64 mime encoded string representing a byte array form of the .NET Framework object]
+                </data>
+        
+            There are any number of "resheader" rows that contain simple 
+            name/value pairs.
+            
+            Each data row contains a name, and value. The row also contains a 
+            type or mimetype. Type corresponds to a .NET class that support 
+            text/value conversion through the TypeConverter architecture. 
+            Classes that don't support this are serialized and stored with the 
+            mimetype set.
+                     
+            The mimetype is used for serialized objects, and tells the 
+            ResXResourceReader how to depersist the object. This is currently not 
+            extensible. For a given mimetype the value must be set accordingly:
+        
+            Note - application/x-microsoft.net.object.binary.base64 is the format 
+                   that the ResXResourceWriter will generate, however the reader can 
+                   read any of the formats listed below.
+        
+            mimetype: application/x-microsoft.net.object.binary.base64
+            value   : The object must be serialized with 
+                    : System.Serialization.Formatters.Binary.BinaryFormatter
+                    : and then encoded with base64 encoding.
+        
+            mimetype: application/x-microsoft.net.object.soap.base64
+            value   : The object must be serialized with 
+                    : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+                    : and then encoded with base64 encoding.
+            mimetype: application/x-microsoft.net.object.bytearray.base64
+            value   : The object must be serialized into a byte array 
+                    : using a System.ComponentModel.TypeConverter
+                    : and then encoded with base64 encoding.
+        -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>1.3</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="$this.Name">
+    <value>FieldCombFrm</value>
+  </data>
+</root>

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/FieldTextFrm.cs

@@ -0,0 +1,425 @@
+/*********************************************************************************************
+ * Copyright 2002 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: FieldTextFrm.cs $     $Revision: 12 $
+ * $Author: Kathy $   $Date: 7/15/04 11:11a $
+ *
+ * $History: FieldTextFrm.cs $
+ * 
+ * *****************  Version 12  *****************
+ * User: Kathy        Date: 7/15/04    Time: 11:11a
+ * Updated in $/EXE/RefObj/ROEditor
+ * Fix B2004-015
+ * 
+ * *****************  Version 11  *****************
+ * User: Kathy        Date: 12/09/03   Time: 9:29a
+ * Updated in $/EXE/RefObj/ROEditor
+ * B2003-066 fix - add new fieldname crash
+ * 
+ * *****************  Version 10  *****************
+ * User: Kathy        Date: 5/21/03    Time: 12:46p
+ * Updated in $/EXE/RefObj/ROEditor
+ * B2003-041: edit of field name didn't always save
+ * 
+ * *****************  Version 9  *****************
+ * User: Kathy        Date: 12/10/02   Time: 2:25p
+ * Updated in $/EXE/RefObj/ROEditor
+ * fieldname special chars
+ * 
+ * *****************  Version 8  *****************
+ * User: Kathy        Date: 12/02/02   Time: 8:29a
+ * Updated in $/EXE/RefObj/ROEditor
+ * fieldname replace chars
+ * 
+ * *****************  Version 7  *****************
+ * User: Kathy        Date: 12/02/02   Time: 6:13a
+ * Updated in $/EXE/RefObj/ROEditor
+ * added arg on db call
+ * 
+ * *****************  Version 6  *****************
+ * User: Kathy        Date: 11/19/02   Time: 11:31a
+ * Updated in $/EXE/RefObj/ROEditor
+ * add wait cursor for long op
+ * 
+ * *****************  Version 5  *****************
+ * User: Kathy        Date: 9/27/02    Time: 1:13p
+ * Updated in $/EXE/RefObj/ROEditor
+ * fix digit as first char in fieldname
+ * 
+ * *****************  Version 4  *****************
+ * User: Kathy        Date: 9/25/02    Time: 9:56a
+ * Updated in $/EXE/RefObj/ROEditor
+ * dev
+ * 
+ * *****************  Version 3  *****************
+ * User: Kathy        Date: 9/11/02    Time: 1:15p
+ * Updated in $/EXE/RefObj/ROEditor
+ * vlnxml
+ * 
+ * *****************  Version 2  *****************
+ * User: Kathy        Date: 9/05/02    Time: 12:41p
+ * Updated in $/EXE/RefObj/ROEditor
+ * dev
+ * 
+ * *****************  Version 1  *****************
+ * User: Jsj          Date: 8/23/02    Time: 3:33p
+ * Created in $/EXE/RefObj/ROEditor
+ *********************************************************************************************/
+
+using System;
+using System.Drawing;
+using System.Collections;
+using System.ComponentModel;
+using System.Windows.Forms;
+using System.Xml;
+using System.Xml.Schema;
+using System.Text;
+using ROFields;
+using RODBInterface;
+
+namespace ROEditor
+{
+	/// <summary>
+	/// Summary description for FieldText.
+	/// </summary>
+	public class FieldTextFrm : System.Windows.Forms.Form
+	{
+		private System.Windows.Forms.Label lblFName;
+		private System.Windows.Forms.Label lblWidth;
+		private System.Windows.Forms.TextBox tbFieldName;
+		private System.Windows.Forms.TextBox tbWidth;
+		private System.Windows.Forms.Button btnOK;
+		private System.Windows.Forms.Button btnCancel;
+		private System.Windows.Forms.Label lblPattern;
+		private System.Windows.Forms.TextBox tbPattern;
+		/// <summary>
+		/// Required designer variable.
+		/// </summary>
+		private System.ComponentModel.Container components = null;
+	
+		private ROField myrof;
+		private RODB myrodb;
+		private VlnXmlElement myelem;
+		private string schemapiece;
+		private string origname;
+		private bool exists=false;
+		private uint original_type;
+		private uint editlevel;
+		private ArrayList avail_list;
+		private ArrayList inuse_list;
+		public FieldTextFrm(ROField rof, RODB rodb, VlnXmlElement elem, uint otype, uint elevel, string oname, ArrayList alist, ArrayList ilist)
+		{
+			//
+			// Required for Windows Form Designer support
+			//
+			myrodb = rodb;
+			myelem = elem;
+			myrof = rof;
+			original_type = otype;
+			editlevel = elevel;
+			avail_list = alist;
+			inuse_list = ilist;
+			uint ftype = rof.GetFieldType;
+			// origname is the original name if this is a modification of a fieldname
+			// if it's new, it will be null
+			if(oname!=null)origname=CvtUserFldToFld(oname);
+			InitializeComponent();
+			
+			if (ftype == (uint)FieldTypes.FrmtSingleTxt) 
+			{
+				this.tbPattern.Visible = true;
+				this.lblPattern.Visible = true;
+			}
+			else
+			{
+				this.tbPattern.Visible = false;
+				this.lblPattern.Visible = false;
+			}
+
+			// put name out. and if it's an existing field get current data to 
+			// put out.
+			this.tbFieldName.Text = rof.GetFieldname;
+			if (rof.GetRecID != null)
+			{
+				exists = true;
+				if (rof.GetMasterRecID != null)
+					// get it from the master, else read in the definition from
+					// the local table
+					schemapiece = myrodb.RODB_GetSchemaPiece(rof.GetMasterRecID,"ROMaster");
+				else
+					schemapiece = myrodb.RODB_GetSchemaPiece(rof.GetRecID,myelem.GetAttribute("Table"));
+				int indxs = schemapiece.IndexOf("maxLength value=");
+				int indxe = schemapiece.IndexOf("\"",indxs+17);   // +17, get past maxLength value ="
+				this.tbWidth.Text = schemapiece.Substring(indxs+17,indxe-(indxs+17));
+				
+				// get pattern too.
+				if (ftype == (uint)FieldTypes.FrmtSingleTxt) 
+				{
+					indxs = schemapiece.IndexOf("pattern value=");
+					indxe = schemapiece.IndexOf("\"",indxs+15);
+					this.tbPattern.Text = schemapiece.Substring(indxs+15,indxe-(indxs+15)); 
+				}
+			}
+		}
+
+		private string CvtUserFldToFld(string fldname)
+		{
+			if (fldname.Length < 2)
+				return fldname;
+			// a digit cannot start an xml fieldname, prepend a "__" to it.
+			string tmp0;
+			if (char.IsDigit(fldname,0))
+				tmp0 = "__" + fldname;
+			else
+				tmp0 = fldname;
+			// an xml fieldname cannot have a space, change it to a "__"
+			string tmpstr = tmp0.Replace(" ","__");
+			int len = tmpstr.Length;
+			int cnt = 0;
+
+			// this is also our sequence that tells us the follow 3 digits is the ascii number (base 10)
+			// of the character we replaced.
+			string OKpunch = "-._"; 
+
+			string outstr = "";
+			int decval;
+
+			while (cnt < len)
+			{
+				char tmpchr = tmpstr[cnt];
+				if(!char.IsLetterOrDigit(tmpchr)&& (OKpunch.IndexOf(tmpchr) == -1) )
+				{
+					decval = tmpchr;
+					outstr += OKpunch + decval.ToString("D3");
+				}
+				else
+				{
+					outstr += tmpchr.ToString();
+				}
+				cnt++;
+			}
+			return outstr;
+		}
+
+		private bool CheckValidWidth(string wid)
+		{
+			long val;
+			try {
+				// Attempt to convert to long, if it fails, there are problems in the text
+				val = System.Convert.ToInt64(wid);
+			}
+			catch {
+				MessageBox.Show("The field width is not a valid number. Please re-enter");
+				return false;
+			}
+			return true;
+		}
+
+		private void btnOK_Click(object sender, System.EventArgs e)
+		{
+			string savschemapiece;
+			bool success=false;
+
+			// check for field validity
+			if (this.tbFieldName.Text == null || this.tbWidth.Text == null)
+			{
+				MessageBox.Show("Cannot have empty field defintion name or width");
+				return;
+			}
+			success=CheckValidWidth(this.tbWidth.Text);
+			if (success == false) return;
+			// check that it is not duplicate name.
+			ROField rof;
+			for (int i=0; i< avail_list.Count; i++)
+			{
+				rof = (ROField) avail_list[i];
+				if (rof.GetFieldname == this.tbFieldName.Text && rof.GetRecID != myrof.GetRecID)
+				{
+					MessageBox.Show("The field name is not unique. Please re-enter");
+					return;
+				}
+			}
+			for (int i=0; i< inuse_list.Count; i++)
+			{
+				rof = (ROField) inuse_list[i];
+				if (rof.GetFieldname == this.tbFieldName.Text && rof.GetRecID != myrof.GetRecID)
+				{
+					MessageBox.Show("The field name is not unique. Please re-enter");
+					return;
+				}
+			}
+
+			// generate the new schema string based on text box input.
+			string fname=CvtUserFldToFld(this.tbFieldName.Text);
+			savschemapiece = myrof.MakeSchemaString(fname, this.tbWidth.Text, this.tbPattern.Text);
+			myrof.SetFieldname(fname);
+			// if this is 'new'. create a new element and do an insert to Master database
+			if (exists == false)
+				success = myrodb.RODB_NewFieldRecord(myrof, myelem, savschemapiece, editlevel, null);
+			else     // modification of existing....
+			{
+				Cursor.Current = Cursors.WaitCursor;
+				success = myrodb.RODB_UpdateFieldRecord(myrof, myelem, savschemapiece, origname, fname, editlevel, false);
+				Cursor.Current = Cursors.Default;
+			}
+
+			if (success != true)
+			{
+				return; // DO YET process an error.
+			}
+			else		 
+			{
+				// if this is a RRO schema, reload. We're not reloading the group schema
+				// because it is rarely used and is only loaded as needed.
+				if (editlevel == (uint) RecordType.Schema)
+				{
+					XmlSchema myschema;
+					VlnXmlElement parent;
+					parent = myelem;
+					while (parent != null)
+					{
+						if (parent.HasAttribute("Schema") == true) break;
+						if (parent.HasAttribute("FieldsInUse") == true) break;
+						// If loop to top, fields haven't been defined yet, don't
+						// crash on caste - just set to return null (B2004-015)
+						if (parent.ParentNode is VlnXmlElement)
+							parent = (VlnXmlElement) parent.ParentNode;
+						else
+							parent = null;
+					}
+					// if a schema has been read in, delete it and reread it.
+					if (parent !=null && parent.HasAttribute("Schema"))
+					{
+						// delete this attribute because we'll reread it in.
+						parent.RemoveAttribute("Schema");
+						myschema = myrodb.RODB_GetSchema(myelem);
+					}
+				}
+
+			}
+			this.Close();
+		}
+
+		/// <summary>
+		/// Clean up any resources being used.
+		/// </summary>
+		protected override void Dispose( bool disposing )
+		{
+			if( disposing )
+			{
+				if(components != null)
+				{
+					components.Dispose();
+				}
+			}
+			base.Dispose( disposing );
+		}
+
+		#region Windows Form Designer generated code
+		/// <summary>
+		/// Required method for Designer support - do not modify
+		/// the contents of this method with the code editor.
+		/// </summary>
+		private void InitializeComponent()
+		{
+			this.lblFName = new System.Windows.Forms.Label();
+			this.lblWidth = new System.Windows.Forms.Label();
+			this.tbFieldName = new System.Windows.Forms.TextBox();
+			this.tbWidth = new System.Windows.Forms.TextBox();
+			this.btnOK = new System.Windows.Forms.Button();
+			this.btnCancel = new System.Windows.Forms.Button();
+			this.lblPattern = new System.Windows.Forms.Label();
+			this.tbPattern = new System.Windows.Forms.TextBox();
+			this.SuspendLayout();
+			// 
+			// lblFName
+			// 
+			this.lblFName.Location = new System.Drawing.Point(16, 16);
+			this.lblFName.Name = "lblFName";
+			this.lblFName.Size = new System.Drawing.Size(80, 16);
+			this.lblFName.TabIndex = 0;
+			this.lblFName.Text = "Field Name:";
+			// 
+			// lblWidth
+			// 
+			this.lblWidth.Location = new System.Drawing.Point(16, 40);
+			this.lblWidth.Name = "lblWidth";
+			this.lblWidth.Size = new System.Drawing.Size(72, 16);
+			this.lblWidth.TabIndex = 1;
+			this.lblWidth.Text = "Width:";
+			// 
+			// tbFieldName
+			// 
+			this.tbFieldName.Location = new System.Drawing.Point(104, 8);
+			this.tbFieldName.Name = "tbFieldName";
+			this.tbFieldName.Size = new System.Drawing.Size(320, 22);
+			this.tbFieldName.TabIndex = 2;
+			this.tbFieldName.Text = "";
+			// 
+			// tbWidth
+			// 
+			this.tbWidth.Location = new System.Drawing.Point(104, 40);
+			this.tbWidth.Name = "tbWidth";
+			this.tbWidth.Size = new System.Drawing.Size(32, 22);
+			this.tbWidth.TabIndex = 3;
+			this.tbWidth.Text = "";
+			// 
+			// btnOK
+			// 
+			this.btnOK.Location = new System.Drawing.Point(216, 72);
+			this.btnOK.Name = "btnOK";
+			this.btnOK.Size = new System.Drawing.Size(88, 24);
+			this.btnOK.TabIndex = 4;
+			this.btnOK.Text = "OK";
+			this.btnOK.Click += new System.EventHandler(this.btnOK_Click);
+			// 
+			// btnCancel
+			// 
+			this.btnCancel.DialogResult = System.Windows.Forms.DialogResult.Cancel;
+			this.btnCancel.Location = new System.Drawing.Point(336, 72);
+			this.btnCancel.Name = "btnCancel";
+			this.btnCancel.Size = new System.Drawing.Size(88, 24);
+			this.btnCancel.TabIndex = 5;
+			this.btnCancel.Text = "Cancel";
+			// 
+			// lblPattern
+			// 
+			this.lblPattern.Location = new System.Drawing.Point(160, 40);
+			this.lblPattern.Name = "lblPattern";
+			this.lblPattern.Size = new System.Drawing.Size(48, 16);
+			this.lblPattern.TabIndex = 6;
+			this.lblPattern.Text = "Pattern:";
+			this.lblPattern.Visible = false;
+			// 
+			// tbPattern
+			// 
+			this.tbPattern.Location = new System.Drawing.Point(224, 40);
+			this.tbPattern.Name = "tbPattern";
+			this.tbPattern.Size = new System.Drawing.Size(176, 22);
+			this.tbPattern.TabIndex = 7;
+			this.tbPattern.Text = "";
+			this.tbPattern.Visible = false;
+			// 
+			// FieldTextFrm
+			// 
+			this.AutoScaleBaseSize = new System.Drawing.Size(6, 15);
+			this.ClientSize = new System.Drawing.Size(464, 101);
+			this.Controls.AddRange(new System.Windows.Forms.Control[] {
+																		  this.tbPattern,
+																		  this.lblPattern,
+																		  this.btnCancel,
+																		  this.btnOK,
+																		  this.tbWidth,
+																		  this.tbFieldName,
+																		  this.lblWidth,
+																		  this.lblFName});
+			this.Font = new System.Drawing.Font("Tahoma", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.Name = "FieldTextFrm";
+			this.Text = "Text Field Definition";
+			this.ResumeLayout(false);
+
+		}
+		#endregion
+	}
+}

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/FieldTextFrm.resx

@@ -0,0 +1,102 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+            Microsoft ResX Schema 
+        
+            Version 1.3
+                
+            The primary goals of this format is to allow a simple XML format 
+            that is mostly human readable. The generation and parsing of the 
+            various data types are done through the TypeConverter classes 
+            associated with the data types.
+        
+            Example:
+        
+                ... ado.net/XML headers & schema ...
+                <resheader name="resmimetype">text/microsoft-resx</resheader>
+                <resheader name="version">1.3</resheader>
+                <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+                <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+                <data name="Name1">this is my long string</data>
+                <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+                <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+                    [base64 mime encoded serialized .NET Framework object]
+                </data>
+                <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+                    [base64 mime encoded string representing a byte array form of the .NET Framework object]
+                </data>
+        
+            There are any number of "resheader" rows that contain simple 
+            name/value pairs.
+            
+            Each data row contains a name, and value. The row also contains a 
+            type or mimetype. Type corresponds to a .NET class that support 
+            text/value conversion through the TypeConverter architecture. 
+            Classes that don't support this are serialized and stored with the 
+            mimetype set.
+                     
+            The mimetype is used for serialized objects, and tells the 
+            ResXResourceReader how to depersist the object. This is currently not 
+            extensible. For a given mimetype the value must be set accordingly:
+        
+            Note - application/x-microsoft.net.object.binary.base64 is the format 
+                   that the ResXResourceWriter will generate, however the reader can 
+                   read any of the formats listed below.
+        
+            mimetype: application/x-microsoft.net.object.binary.base64
+            value   : The object must be serialized with 
+                    : System.Serialization.Formatters.Binary.BinaryFormatter
+                    : and then encoded with base64 encoding.
+        
+            mimetype: application/x-microsoft.net.object.soap.base64
+            value   : The object must be serialized with 
+                    : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+                    : and then encoded with base64 encoding.
+            mimetype: application/x-microsoft.net.object.bytearray.base64
+            value   : The object must be serialized into a byte array 
+                    : using a System.ComponentModel.TypeConverter
+                    : and then encoded with base64 encoding.
+        -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>1.3</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="$this.Name">
+    <value>FieldTextFrm</value>
+  </data>
+</root>

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/FieldTypeDefFrm.cs

@@ -0,0 +1,435 @@
+/*********************************************************************************************
+ * Copyright 2002 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: FieldTypeDefFrm.cs $     $Revision: 11 $
+ * $Author: Kathy $   $Date: 5/21/03 12:49p $
+ *
+ * $History: FieldTypeDefFrm.cs $
+ * 
+ * *****************  Version 11  *****************
+ * User: Kathy        Date: 5/21/03    Time: 12:49p
+ * Updated in $/EXE/RefObj/ROEditor
+ * B2003-041: edit of fieldname didn't always save
+ * 
+ * *****************  Version 10  *****************
+ * User: Kathy        Date: 12/10/02   Time: 2:25p
+ * Updated in $/EXE/RefObj/ROEditor
+ * fieldname special chars
+ * 
+ * *****************  Version 9  *****************
+ * User: Kathy        Date: 12/02/02   Time: 8:29a
+ * Updated in $/EXE/RefObj/ROEditor
+ * fieldname replace chars
+ * 
+ * *****************  Version 8  *****************
+ * User: Kathy        Date: 12/02/02   Time: 6:17a
+ * Updated in $/EXE/RefObj/ROEditor
+ * added arg and close form
+ * 
+ * *****************  Version 7  *****************
+ * User: Kathy        Date: 9/27/02    Time: 1:13p
+ * Updated in $/EXE/RefObj/ROEditor
+ * fix digit as first char in fieldname
+ * 
+ * *****************  Version 6  *****************
+ * User: Kathy        Date: 9/25/02    Time: 2:30p
+ * Updated in $/EXE/RefObj/ROEditor
+ * multitxt->variable
+ * 
+ * *****************  Version 5  *****************
+ * User: Kathy        Date: 9/25/02    Time: 9:56a
+ * Updated in $/EXE/RefObj/ROEditor
+ * dev
+ * 
+ * *****************  Version 4  *****************
+ * User: Kathy        Date: 9/11/02    Time: 1:15p
+ * Updated in $/EXE/RefObj/ROEditor
+ * vlnxml
+ * 
+ * *****************  Version 3  *****************
+ * User: Kathy        Date: 9/05/02    Time: 12:41p
+ * Updated in $/EXE/RefObj/ROEditor
+ * dev
+ * 
+ * *****************  Version 2  *****************
+ * User: Kathy        Date: 8/30/02    Time: 9:43a
+ * Updated in $/EXE/RefObj/ROEditor
+ * image def
+ * 
+ * *****************  Version 1  *****************
+ * User: Jsj          Date: 8/23/02    Time: 3:34p
+ * Created in $/EXE/RefObj/ROEditor
+ *********************************************************************************************/
+
+
+using System;
+using System.Drawing;
+using System.Collections;
+using System.ComponentModel;
+using System.Windows.Forms;
+using System.Xml;
+using System.Text;
+using RODBInterface;
+using ROFields;
+
+namespace ROEditor
+{
+	/// <summary>
+	/// Summary description for FieldType.
+	/// </summary>
+	///
+
+	public class FieldTypeDefFrm : System.Windows.Forms.Form
+	{
+		private System.Windows.Forms.Label lblFldName;
+		private System.Windows.Forms.TextBox tbFieldName;
+		private System.Windows.Forms.GroupBox gbFldType;
+		private System.Windows.Forms.RadioButton rbSingleLine;
+		private System.Windows.Forms.RadioButton rbFormSingleLine;
+		private System.Windows.Forms.RadioButton rbVariableTxt;
+		private System.Windows.Forms.RadioButton rbTable;
+		private System.Windows.Forms.RadioButton rbXYPlot;
+		private System.Windows.Forms.RadioButton rbImage;
+		private System.Windows.Forms.RadioButton rbCombination;
+		private System.Windows.Forms.RadioButton rbMultiple;
+		private System.Windows.Forms.Button btnContinue;
+		private System.Windows.Forms.Button btnCancel;
+		/// <summary>
+		/// Required designer variable.
+		/// </summary>
+		private System.ComponentModel.Container components = null;
+		private ROField myrof;
+		private RODB myrodb;
+		private VlnXmlElement myelem;
+		private uint original_type=0;
+		private string origname;
+		private uint editlevel;
+		private ArrayList avlist;	// available list from rodef form
+		private ArrayList iulist;  // inuse list from rodef form
+		public FieldTypeDefFrm(ROField rof, RODB rodb, VlnXmlElement elem, uint elevel, ArrayList alist, ArrayList ilist)
+		{
+			//
+			// Required for Windows Form Designer support
+			//
+			InitializeComponent();
+			myrof = rof;
+			myrodb = rodb;
+			myelem = elem;
+			editlevel = elevel;
+			avlist = alist;
+			iulist = ilist;
+			origname = null;
+			
+			if (rof.GetFieldname != null)   // initialize some values.
+			{
+				origname = CvtUserFldToFld(rof.GetFieldname);
+				original_type = rof.GetFieldType;
+				uint ftype = rof.GetFieldType;
+				this.tbFieldName.Text = rof.GetFieldname;
+				// disable image, because it's only enabled for image type. 
+				this.rbImage.Enabled = false;
+				if (ftype == (uint)FieldTypes.Combination)
+					this.rbCombination.Checked = true;
+				else if (ftype == (uint)FieldTypes.FrmtSingleTxt)
+					this.rbFormSingleLine.Checked = true;
+				else if (ftype == (uint)FieldTypes.Image)
+				{
+					this.rbImage.Enabled = true;
+					this.rbImage.Checked = true;
+					// for image - you can't change it's type.
+					this.rbCombination.Enabled = false;
+					this.rbFormSingleLine.Enabled = false;
+					this.rbVariableTxt.Enabled = false;
+					this.rbSingleLine.Enabled = false;
+					this.rbTable.Enabled = false;
+					this.rbXYPlot.Enabled = false;
+				}
+				else if (ftype == (uint)FieldTypes.VariableTxt)
+					this.rbVariableTxt.Checked = true;
+				else if (ftype == (uint)FieldTypes.SingleTxt)
+					this.rbSingleLine.Checked = true;
+				else if (ftype == (uint)FieldTypes.Table)
+					this.rbTable.Checked = true;
+				else if (ftype == (uint)FieldTypes.XYPlot)
+					this.rbXYPlot.Checked = true;
+				else
+					return;
+			}
+		}
+
+		private string CvtUserFldToFld(string fldname)
+		{
+			if (fldname.Length < 2)
+				return fldname;
+			// a digit cannot start an xml fieldname, prepend a "__" to it.
+			string tmp0;
+			if (char.IsDigit(fldname,0))
+				tmp0 = "__" + fldname;
+			else
+				tmp0 = fldname;
+			// an xml fieldname cannot have a space, change it to a "__"
+			string tmpstr = tmp0.Replace(" ","__");
+			int len = tmpstr.Length;
+			int cnt = 0;
+
+			// this is also our sequence that tells us the follow 3 digits is the ascii number (base 10)
+			// of the character we replaced.
+			string OKpunch = "-._"; 
+
+			string outstr = "";
+			int decval;
+
+			while (cnt < len)
+			{
+				char tmpchr = tmpstr[cnt];
+				if(!char.IsLetterOrDigit(tmpchr)&& (OKpunch.IndexOf(tmpchr) == -1) )
+				{
+					decval = tmpchr;
+					outstr += OKpunch + decval.ToString("D3");
+				}
+				else
+				{
+					outstr += tmpchr.ToString();
+				}
+				cnt++;
+			}
+			return outstr;
+		}
+
+		/// <summary>
+		/// Clean up any resources being used.
+		/// </summary>
+		protected override void Dispose( bool disposing )
+		{
+			if( disposing )
+			{
+				if(components != null)
+				{
+					components.Dispose();
+				}
+			}
+			base.Dispose( disposing );
+		}
+
+		private void btnContinue_Click(object sender, System.EventArgs e)
+		{
+			if (this.tbFieldName.Text == "") 
+			{
+				MessageBox.Show("Cannot have empty field name.");
+				return;
+			}
+
+			myrof.SetFieldname(this.tbFieldName.Text);
+			uint ftype=0;
+			if (this.rbSingleLine.Checked == true) 
+				ftype = (uint)FieldTypes.SingleTxt;
+			else if (this.rbFormSingleLine.Checked == true)
+				ftype = (uint)FieldTypes.FrmtSingleTxt;
+			else if (this.rbVariableTxt.Checked == true)
+				ftype = (uint)FieldTypes.VariableTxt;
+			else if (this.rbTable.Checked == true)
+				ftype = (uint)FieldTypes.Table;
+			else if (this.rbXYPlot.Checked == true)
+				ftype = (uint)FieldTypes.XYPlot;
+			else if (this.rbImage.Checked == true)
+			{
+				bool success;
+				string savschemapiece;
+				string fname=CvtUserFldToFld(this.tbFieldName.Text);
+				myrof.SetFieldType((uint)FieldTypes.Image);
+				myrof.SetFieldname(fname);
+				savschemapiece = myrof.MakeImageSchemaString(this.tbFieldName.Text);
+				if (original_type == (uint)FieldTypes.Nil)  // new one.
+					success = myrodb.RODB_NewFieldRecord(myrof, myelem, savschemapiece, editlevel, null);
+				else     // modification of existing....
+					success = myrodb.RODB_UpdateFieldRecord(myrof, myelem, savschemapiece, origname, fname, editlevel, false);
+			
+				if (success != true)
+				{
+					return; // DO YET process an error.
+				}
+				return;
+		
+			}
+			else if (this.rbCombination.Checked == true)
+			{
+				ftype = (uint)FieldTypes.Combination;
+				myrof.SetFieldType(ftype);
+				FieldCombFrm comb = new FieldCombFrm(myrof, myrodb, myelem, editlevel, origname, avlist, iulist);
+				comb.ShowDialog();
+				if (comb.DialogResult == DialogResult.OK) 
+				{
+				}
+				return;
+			}
+			else 
+			{
+				MessageBox.Show("Must define a field type.");
+				return;
+			}
+			myrof.SetFieldType(ftype);
+			FieldTextFrm ftxt = new FieldTextFrm(myrof, myrodb, myelem, original_type, editlevel, origname, avlist, iulist);
+			ftxt.ShowDialog();
+			this.Close();
+		}
+		#region Windows Form Designer generated code
+		/// <summary>
+		/// Required method for Designer support - do not modify
+		/// the contents of this method with the code editor.
+		/// </summary>
+		private void InitializeComponent()
+		{
+			this.lblFldName = new System.Windows.Forms.Label();
+			this.tbFieldName = new System.Windows.Forms.TextBox();
+			this.gbFldType = new System.Windows.Forms.GroupBox();
+			this.rbMultiple = new System.Windows.Forms.RadioButton();
+			this.rbCombination = new System.Windows.Forms.RadioButton();
+			this.rbImage = new System.Windows.Forms.RadioButton();
+			this.rbXYPlot = new System.Windows.Forms.RadioButton();
+			this.rbTable = new System.Windows.Forms.RadioButton();
+			this.rbVariableTxt = new System.Windows.Forms.RadioButton();
+			this.rbFormSingleLine = new System.Windows.Forms.RadioButton();
+			this.rbSingleLine = new System.Windows.Forms.RadioButton();
+			this.btnContinue = new System.Windows.Forms.Button();
+			this.btnCancel = new System.Windows.Forms.Button();
+			this.gbFldType.SuspendLayout();
+			this.SuspendLayout();
+			// 
+			// lblFldName
+			// 
+			this.lblFldName.Location = new System.Drawing.Point(16, 8);
+			this.lblFldName.Name = "lblFldName";
+			this.lblFldName.Size = new System.Drawing.Size(88, 16);
+			this.lblFldName.TabIndex = 0;
+			this.lblFldName.Text = "Field Name:";
+			// 
+			// tbFieldName
+			// 
+			this.tbFieldName.Location = new System.Drawing.Point(120, 8);
+			this.tbFieldName.Name = "tbFieldName";
+			this.tbFieldName.Size = new System.Drawing.Size(368, 22);
+			this.tbFieldName.TabIndex = 1;
+			this.tbFieldName.Text = "";
+			// 
+			// gbFldType
+			// 
+			this.gbFldType.Controls.AddRange(new System.Windows.Forms.Control[] {
+																					this.rbMultiple,
+																					this.rbCombination,
+																					this.rbImage,
+																					this.rbXYPlot,
+																					this.rbTable,
+																					this.rbVariableTxt,
+																					this.rbFormSingleLine,
+																					this.rbSingleLine});
+			this.gbFldType.Location = new System.Drawing.Point(24, 40);
+			this.gbFldType.Name = "gbFldType";
+			this.gbFldType.Size = new System.Drawing.Size(464, 120);
+			this.gbFldType.TabIndex = 2;
+			this.gbFldType.TabStop = false;
+			this.gbFldType.Text = "Field Type";
+			// 
+			// rbMultiple
+			// 
+			this.rbMultiple.Enabled = false;
+			this.rbMultiple.Location = new System.Drawing.Point(248, 96);
+			this.rbMultiple.Name = "rbMultiple";
+			this.rbMultiple.Size = new System.Drawing.Size(128, 16);
+			this.rbMultiple.TabIndex = 7;
+			this.rbMultiple.Text = "Multiple Field";
+			// 
+			// rbCombination
+			// 
+			this.rbCombination.Location = new System.Drawing.Point(248, 72);
+			this.rbCombination.Name = "rbCombination";
+			this.rbCombination.Size = new System.Drawing.Size(128, 16);
+			this.rbCombination.TabIndex = 6;
+			this.rbCombination.Text = "Combination Field";
+			// 
+			// rbImage
+			// 
+			this.rbImage.Location = new System.Drawing.Point(248, 48);
+			this.rbImage.Name = "rbImage";
+			this.rbImage.Size = new System.Drawing.Size(128, 16);
+			this.rbImage.TabIndex = 5;
+			this.rbImage.Text = "Image";
+			// 
+			// rbXYPlot
+			// 
+			this.rbXYPlot.Location = new System.Drawing.Point(248, 24);
+			this.rbXYPlot.Name = "rbXYPlot";
+			this.rbXYPlot.Size = new System.Drawing.Size(128, 16);
+			this.rbXYPlot.TabIndex = 4;
+			this.rbXYPlot.Text = "X/Y Plot";
+			// 
+			// rbTable
+			// 
+			this.rbTable.Location = new System.Drawing.Point(24, 96);
+			this.rbTable.Name = "rbTable";
+			this.rbTable.Size = new System.Drawing.Size(128, 16);
+			this.rbTable.TabIndex = 3;
+			this.rbTable.Text = "Table";
+			// 
+			// rbVariableTxt
+			// 
+			this.rbVariableTxt.Location = new System.Drawing.Point(24, 72);
+			this.rbVariableTxt.Name = "rbVariableTxt";
+			this.rbVariableTxt.Size = new System.Drawing.Size(160, 16);
+			this.rbVariableTxt.TabIndex = 2;
+			this.rbVariableTxt.Text = "Variable Length Text";
+			// 
+			// rbFormSingleLine
+			// 
+			this.rbFormSingleLine.Location = new System.Drawing.Point(24, 48);
+			this.rbFormSingleLine.Name = "rbFormSingleLine";
+			this.rbFormSingleLine.Size = new System.Drawing.Size(184, 16);
+			this.rbFormSingleLine.TabIndex = 1;
+			this.rbFormSingleLine.Text = "Formatted Single Line Text";
+			// 
+			// rbSingleLine
+			// 
+			this.rbSingleLine.Location = new System.Drawing.Point(24, 24);
+			this.rbSingleLine.Name = "rbSingleLine";
+			this.rbSingleLine.Size = new System.Drawing.Size(128, 16);
+			this.rbSingleLine.TabIndex = 0;
+			this.rbSingleLine.Text = "Single Line Text";
+			// 
+			// btnContinue
+			// 
+			this.btnContinue.Location = new System.Drawing.Point(248, 176);
+			this.btnContinue.Name = "btnContinue";
+			this.btnContinue.Size = new System.Drawing.Size(104, 24);
+			this.btnContinue.TabIndex = 3;
+			this.btnContinue.Text = "Continue ...";
+			this.btnContinue.Click += new System.EventHandler(this.btnContinue_Click);
+			// 
+			// btnCancel
+			// 
+			this.btnCancel.DialogResult = System.Windows.Forms.DialogResult.Cancel;
+			this.btnCancel.Location = new System.Drawing.Point(384, 176);
+			this.btnCancel.Name = "btnCancel";
+			this.btnCancel.Size = new System.Drawing.Size(104, 24);
+			this.btnCancel.TabIndex = 4;
+			this.btnCancel.Text = "Cancel";
+			// 
+			// FieldTypeDefFrm
+			// 
+			this.AutoScaleBaseSize = new System.Drawing.Size(6, 15);
+			this.ClientSize = new System.Drawing.Size(512, 221);
+			this.Controls.AddRange(new System.Windows.Forms.Control[] {
+																		  this.btnCancel,
+																		  this.btnContinue,
+																		  this.gbFldType,
+																		  this.tbFieldName,
+																		  this.lblFldName});
+			this.Font = new System.Drawing.Font("Tahoma", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.Name = "FieldTypeDefFrm";
+			this.Text = " Field Type Selection";
+			this.gbFldType.ResumeLayout(false);
+			this.ResumeLayout(false);
+
+		}
+		#endregion
+	}
+}

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/FieldTypeDefFrm.resx

@@ -0,0 +1,102 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+            Microsoft ResX Schema 
+        
+            Version 1.3
+                
+            The primary goals of this format is to allow a simple XML format 
+            that is mostly human readable. The generation and parsing of the 
+            various data types are done through the TypeConverter classes 
+            associated with the data types.
+        
+            Example:
+        
+                ... ado.net/XML headers & schema ...
+                <resheader name="resmimetype">text/microsoft-resx</resheader>
+                <resheader name="version">1.3</resheader>
+                <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+                <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+                <data name="Name1">this is my long string</data>
+                <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+                <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+                    [base64 mime encoded serialized .NET Framework object]
+                </data>
+                <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+                    [base64 mime encoded string representing a byte array form of the .NET Framework object]
+                </data>
+        
+            There are any number of "resheader" rows that contain simple 
+            name/value pairs.
+            
+            Each data row contains a name, and value. The row also contains a 
+            type or mimetype. Type corresponds to a .NET class that support 
+            text/value conversion through the TypeConverter architecture. 
+            Classes that don't support this are serialized and stored with the 
+            mimetype set.
+                     
+            The mimetype is used for serialized objects, and tells the 
+            ResXResourceReader how to depersist the object. This is currently not 
+            extensible. For a given mimetype the value must be set accordingly:
+        
+            Note - application/x-microsoft.net.object.binary.base64 is the format 
+                   that the ResXResourceWriter will generate, however the reader can 
+                   read any of the formats listed below.
+        
+            mimetype: application/x-microsoft.net.object.binary.base64
+            value   : The object must be serialized with 
+                    : System.Serialization.Formatters.Binary.BinaryFormatter
+                    : and then encoded with base64 encoding.
+        
+            mimetype: application/x-microsoft.net.object.soap.base64
+            value   : The object must be serialized with 
+                    : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+                    : and then encoded with base64 encoding.
+            mimetype: application/x-microsoft.net.object.bytearray.base64
+            value   : The object must be serialized into a byte array 
+                    : using a System.ComponentModel.TypeConverter
+                    : and then encoded with base64 encoding.
+        -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>1.3</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="$this.Name">
+    <value>FieldTypeDefFrm</value>
+  </data>
+</root>

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/FixRev.Bat

@@ -0,0 +1,4 @@
+PUSHD ..\..\..\ReferencedObjects\Exe\RefObj\ROEditor"
+"..\..\..\..\AdjustBuildRevision\bin\Debug\AdjustBuildRevision" "%CD%\AssemblyInfo.cs"
+POPD
+pause

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/GroupDefFrm.cs

@@ -0,0 +1,667 @@
+/*********************************************************************************************
+ * Copyright 2002 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: GroupDefFrm.cs $     $Revision: 17 $
+ * $Author: Jsj $   $Date: 7/02/03 9:25a $
+ *
+ * $History: GroupDefFrm.cs $
+ * 
+ * *****************  Version 17  *****************
+ * User: Jsj          Date: 7/02/03    Time: 9:25a
+ * Updated in $/EXE/RefObj/ROEditor
+ * made messagebox calls modal by removing the parent window reference
+ * 
+ * *****************  Version 16  *****************
+ * User: Kathy        Date: 5/21/03    Time: 12:50p
+ * Updated in $/EXE/RefObj/ROEditor
+ * B2003-034: process if only one field. Also, check for all data on okay
+ * button select.
+ * 
+ * *****************  Version 15  *****************
+ * User: Kathy        Date: 5/07/03    Time: 1:58p
+ * Updated in $/EXE/RefObj/ROEditor
+ * B2003-033 fixed
+ * 
+ * *****************  Version 14  *****************
+ * User: Jsj          Date: 4/14/03    Time: 3:01p
+ * Updated in $/EXE/RefObj/ROEditor
+ * changes resulting from speeding up RO FST file creation
+ * 
+ * *****************  Version 13  *****************
+ * User: Kathy        Date: 3/11/03    Time: 11:25a
+ * Updated in $/EXE/RefObj/ROEditor
+ * allow extra text on accpageid template
+ * 
+ * *****************  Version 12  *****************
+ * User: Kathy        Date: 12/10/02   Time: 2:26p
+ * Updated in $/EXE/RefObj/ROEditor
+ * fieldname special char
+ * 
+ * *****************  Version 11  *****************
+ * User: Kathy        Date: 12/02/02   Time: 8:29a
+ * Updated in $/EXE/RefObj/ROEditor
+ * fieldname replace chars
+ * 
+ * *****************  Version 10  *****************
+ * User: Kathy        Date: 12/02/02   Time: 6:18a
+ * Updated in $/EXE/RefObj/ROEditor
+ * added status on long ops & check for fieldname change for textbox
+ * 
+ * *****************  Version 9  *****************
+ * User: Kathy        Date: 10/15/02   Time: 2:18p
+ * Updated in $/EXE/RefObj/ROEditor
+ * mods for new group (toplevel)
+ * 
+ * *****************  Version 8  *****************
+ * User: Kathy        Date: 10/10/02   Time: 10:02a
+ * Updated in $/EXE/RefObj/ROEditor
+ * accessory page id
+ * 
+ * *****************  Version 7  *****************
+ * User: Kathy        Date: 10/02/02   Time: 1:40p
+ * Updated in $/EXE/RefObj/ROEditor
+ * clean up
+ * 
+ * *****************  Version 6  *****************
+ * User: Kathy        Date: 9/27/02    Time: 1:14p
+ * Updated in $/EXE/RefObj/ROEditor
+ * fix digit as first char in fieldname
+ * 
+ * *****************  Version 5  *****************
+ * User: Kathy        Date: 9/25/02    Time: 9:57a
+ * Updated in $/EXE/RefObj/ROEditor
+ * dev
+ * 
+ * *****************  Version 4  *****************
+ * User: Kathy        Date: 9/19/02    Time: 10:03a
+ * Updated in $/EXE/RefObj/ROEditor
+ * only allow mods at root 
+ * 
+ * *****************  Version 3  *****************
+ * User: Kathy        Date: 9/11/02    Time: 1:15p
+ * Updated in $/EXE/RefObj/ROEditor
+ * vlnxml
+ * 
+ * *****************  Version 2  *****************
+ * User: Kathy        Date: 8/28/02    Time: 10:56a
+ * Updated in $/EXE/RefObj/ROEditor
+ * development
+ *********************************************************************************************/
+
+
+using System;
+using System.Drawing;
+using System.Collections;
+using System.ComponentModel;
+using System.Windows.Forms;
+using System.Xml;
+using System.Text;
+using RODBInterface;
+using ROFields;
+using VlnStatus;
+
+namespace ROEditor
+{
+	/// <summary>
+	/// Summary description for GroupDefinition.
+	/// </summary>
+	public class GroupDefFrm : System.Windows.Forms.Form
+	{
+		private System.Windows.Forms.Label lblGroup;
+		private System.Windows.Forms.TextBox tbGroup;
+		private System.Windows.Forms.GroupBox groupBox1;
+		private System.Windows.Forms.Label lblPrefix;
+		private System.Windows.Forms.Label lblValue;
+		private System.Windows.Forms.TextBox tbPrefix;
+		private System.Windows.Forms.TextBox tbValue;
+		private System.Windows.Forms.Button btnRODef;
+		private System.Windows.Forms.Button btnSubDef;
+		private System.Windows.Forms.Button btnOK;
+		private System.Windows.Forms.Button btnCancel;
+
+		private RODB myrodb;
+		private VlnXmlElement elem;
+		private string origGroup;
+		private string origPrefix;
+		private string origValue;
+		private int dbtype;
+		/// <summary>
+		/// Required designer variable.
+		/// </summary>
+		private System.ComponentModel.Container components = null;
+
+		public GroupDefFrm(VlnXmlElement pelem, RODB rodb, string gpname,int idbtype)
+		{
+			myrodb = rodb;
+			elem = pelem;
+			origGroup = gpname;
+			dbtype=idbtype;			// if new, 3 = user define, must define fields before save.
+			//
+			// Required for Windows Form Designer support
+			//
+			InitializeComponent();
+			FillInData();
+		}
+
+		private string CvtUserFldToFld(string fldname)
+		{
+			if (fldname.Length < 2)
+				return fldname;
+			// a digit cannot start an xml fieldname, prepend a "__" to it.
+			string tmp0;
+			if (char.IsDigit(fldname,0))
+				tmp0 = "__" + fldname;
+			else
+				tmp0 = fldname;
+			// an xml fieldname cannot have a space, change it to a "__"
+			string tmpstr = tmp0.Replace(" ","__");
+			int len = tmpstr.Length;
+			int cnt = 0;
+
+			// this is also our sequence that tells us the follow 3 digits is the ascii number (base 10)
+			// of the character we replaced.
+			string OKpunch = "-._"; 
+
+			string outstr = "";
+			int decval;
+
+			while (cnt < len)
+			{
+				char tmpchr = tmpstr[cnt];
+				if(!char.IsLetterOrDigit(tmpchr)&& (OKpunch.IndexOf(tmpchr) == -1) )
+				{
+					decval = tmpchr;
+					outstr += OKpunch + decval.ToString("D3");
+				}
+				else
+				{
+					outstr += tmpchr.ToString();
+				}
+				cnt++;
+			}
+			return outstr;
+		}
+
+		private string CvtFldToUserFld(string fldname)
+		{
+			string tmpstr0;
+			if (fldname.Length < 2) return fldname;
+			// an xml element name cannot begin with a digit. we had prepended a "__"
+			if (fldname.Substring(0,2) == "__" && char.IsDigit(fldname,2))
+				tmpstr0 = fldname.Substring(2,fldname.Length-2);
+			else
+				tmpstr0 = fldname;
+			// an xml element name cannot have a space, we converted to a "__"
+			string tmpstr = tmpstr0.Replace("__"," ");
+			int len = tmpstr.Length;
+			int cur = 0;
+
+			// this is also our sequence that tells us the follow 3 digits is the ascii number (base 10)
+			// of the character we replaced.
+			string OKpunch = "-._"; 
+
+			string outstr = "";
+			int decval, indx;
+			if (len <6)
+				indx = -1;
+			else
+				indx=tmpstr.IndexOf(OKpunch,cur);
+			string asc_spchar;
+			while (indx>=0)
+			{
+				outstr += tmpstr.Substring(cur,indx-cur);
+				asc_spchar = tmpstr.Substring(indx+3,3);
+				decval = System.Convert.ToInt16(asc_spchar,10);
+				outstr += System.Convert.ToChar(decval).ToString();
+				cur = indx+6;
+				if (cur+6 > len)
+					indx = -1;
+				else
+					indx = tmpstr.IndexOf(OKpunch,cur);
+			}
+			if (cur<len) outstr += tmpstr.Substring(cur,len-cur);	
+
+			return outstr;
+		}
+
+		private string DetermineGroupName()
+		{
+			// if group immediately below root, just use text at this node & it can be editted
+			// otherwise, parse it according to GroupMenuItem and it's not editable (it 
+			// gets editted by editting the data of the group).
+			if (elem.ParentNode.Name == "RO_Root")
+			{
+				this.tbGroup.Enabled = true;
+				this.tbPrefix.Enabled = true;
+				this.tbValue.Enabled = true;
+				return CvtFldToUserFld(origGroup);
+			}
+			else
+			{
+				this.tbGroup.Enabled = false;
+				this.tbPrefix.Enabled = false;
+				this.tbValue.Enabled = false;
+				return CvtFldToUserFld(origGroup);
+			}
+		}
+		private void FillInData()
+		{
+			this.tbGroup.Text = DetermineGroupName();
+			// get the accessory prefix & accessory vale. May need to walk up the tree for this.
+			// and for a new group, it needs to get it from the parent.
+			string accpref, accvalue;
+			accpref = elem.GetAttribute("AccPageIDPrefix");
+			accvalue = elem.GetAttribute("AccPageID");
+
+			VlnXmlElement parent;
+			parent = (VlnXmlElement) elem.ParentNode;
+			while (parent != null && (accpref == "" || accvalue==""))
+			{
+				// walk up tree to get parent.
+				if (accpref == "") accpref = parent.GetAttribute("AccPageIDPrefix");
+				if (accvalue == "") accvalue = parent.GetAttribute("AccPageID");
+				if (parent.Name != "RO_Root")
+					parent = (VlnXmlElement) parent.ParentNode;
+				else
+					parent = null;
+			}
+			if (accpref != "")
+				this.tbPrefix.Text = accpref;
+			else
+				this.tbPrefix.Text = "";
+			
+			if (accvalue != "")
+				this.tbValue.Text = CvtFldToUserFld(accvalue);
+			else
+				this.tbValue.Text = "";
+
+			origGroup = this.tbGroup.Text;
+			origPrefix = this.tbPrefix.Text;
+			origValue = this.tbValue.Text;
+		}
+
+		/// <summary>
+		/// Clean up any resources being used.
+		/// </summary>
+		protected override void Dispose( bool disposing )
+		{
+
+			if( disposing )
+			{
+				if(components != null)
+				{
+					components.Dispose();
+				}
+			}
+			base.Dispose( disposing );
+		}
+
+
+		#region Windows Form Designer generated code
+		/// <summary>
+		/// Required method for Designer support - do not modify
+		/// the contents of this method with the code editor.
+		/// </summary>
+		private void InitializeComponent()
+		{
+			this.lblGroup = new System.Windows.Forms.Label();
+			this.tbGroup = new System.Windows.Forms.TextBox();
+			this.groupBox1 = new System.Windows.Forms.GroupBox();
+			this.tbValue = new System.Windows.Forms.TextBox();
+			this.tbPrefix = new System.Windows.Forms.TextBox();
+			this.lblValue = new System.Windows.Forms.Label();
+			this.lblPrefix = new System.Windows.Forms.Label();
+			this.btnRODef = new System.Windows.Forms.Button();
+			this.btnSubDef = new System.Windows.Forms.Button();
+			this.btnOK = new System.Windows.Forms.Button();
+			this.btnCancel = new System.Windows.Forms.Button();
+			this.groupBox1.SuspendLayout();
+			this.SuspendLayout();
+			// 
+			// lblGroup
+			// 
+			this.lblGroup.Location = new System.Drawing.Point(24, 8);
+			this.lblGroup.Name = "lblGroup";
+			this.lblGroup.Size = new System.Drawing.Size(56, 16);
+			this.lblGroup.TabIndex = 0;
+			this.lblGroup.Text = "Group:";
+			// 
+			// tbGroup
+			// 
+			this.tbGroup.Location = new System.Drawing.Point(88, 8);
+			this.tbGroup.Name = "tbGroup";
+			this.tbGroup.Size = new System.Drawing.Size(248, 22);
+			this.tbGroup.TabIndex = 1;
+			this.tbGroup.Text = "textBox1";
+			// 
+			// groupBox1
+			// 
+			this.groupBox1.Controls.AddRange(new System.Windows.Forms.Control[] {
+																					this.tbValue,
+																					this.tbPrefix,
+																					this.lblValue,
+																					this.lblPrefix});
+			this.groupBox1.Location = new System.Drawing.Point(24, 56);
+			this.groupBox1.Name = "groupBox1";
+			this.groupBox1.Size = new System.Drawing.Size(312, 96);
+			this.groupBox1.TabIndex = 2;
+			this.groupBox1.TabStop = false;
+			this.groupBox1.Text = "Accessory Page Access";
+			// 
+			// tbValue
+			// 
+			this.tbValue.Location = new System.Drawing.Point(72, 56);
+			this.tbValue.Name = "tbValue";
+			this.tbValue.Size = new System.Drawing.Size(216, 22);
+			this.tbValue.TabIndex = 3;
+			this.tbValue.Text = "textBox1";
+			// tbPrefix
+			// 
+			this.tbPrefix.Location = new System.Drawing.Point(72, 24);
+			this.tbPrefix.Name = "tbPrefix";
+			this.tbPrefix.Size = new System.Drawing.Size(216, 22);
+			this.tbPrefix.TabIndex = 2;
+			this.tbPrefix.Text = "textBox1";
+			// 
+			// lblValue
+			// 
+			this.lblValue.Location = new System.Drawing.Point(16, 56);
+			this.lblValue.Name = "lblValue";
+			this.lblValue.Size = new System.Drawing.Size(48, 16);
+			this.lblValue.TabIndex = 1;
+			this.lblValue.Text = "Value:";
+			// 
+			// lblPrefix
+			// 
+			this.lblPrefix.ForeColor = System.Drawing.SystemColors.ControlText;
+			this.lblPrefix.Location = new System.Drawing.Point(16, 24);
+			this.lblPrefix.Name = "lblPrefix";
+			this.lblPrefix.Size = new System.Drawing.Size(48, 16);
+			this.lblPrefix.TabIndex = 0;
+			this.lblPrefix.Text = "Prefix:";
+			// 
+			// btnRODef
+			// 
+			this.btnRODef.Location = new System.Drawing.Point(24, 168);
+			this.btnRODef.Name = "btnRODef";
+			this.btnRODef.Size = new System.Drawing.Size(312, 24);
+			this.btnRODef.TabIndex = 3;
+			this.btnRODef.Text = "Referenced Object Definition...";
+			this.btnRODef.Click += new System.EventHandler(this.btnRODef_Click);
+			// 
+			// btnSubDef
+			// 
+			this.btnSubDef.Location = new System.Drawing.Point(24, 208);
+			this.btnSubDef.Name = "btnSubDef";
+			this.btnSubDef.Size = new System.Drawing.Size(312, 24);
+			this.btnSubDef.TabIndex = 4;
+			this.btnSubDef.Text = "Subgroup Definition ...";
+			this.btnSubDef.Click += new System.EventHandler(this.btnSubDef_Click);
+			// 
+			// btnOK
+			// 
+			this.btnOK.Location = new System.Drawing.Point(24, 248);
+			this.btnOK.Name = "btnOK";
+			this.btnOK.Size = new System.Drawing.Size(144, 24);
+			this.btnOK.TabIndex = 5;
+			this.btnOK.Text = "OK";
+			this.btnOK.Click += new System.EventHandler(this.btnOK_Click);
+			// 
+			// btnCancel
+			// 
+			this.btnCancel.DialogResult = System.Windows.Forms.DialogResult.Cancel;
+			this.btnCancel.Location = new System.Drawing.Point(192, 248);
+			this.btnCancel.Name = "btnCancel";
+			this.btnCancel.Size = new System.Drawing.Size(144, 24);
+			this.btnCancel.TabIndex = 6;
+			this.btnCancel.Text = "Cancel";
+			// 
+			// GroupDefFrm
+			// 
+			this.AutoScaleBaseSize = new System.Drawing.Size(6, 15);
+			this.ClientSize = new System.Drawing.Size(368, 293);
+			this.Controls.AddRange(new System.Windows.Forms.Control[] {
+																		  this.btnCancel,
+																		  this.btnOK,
+																		  this.btnSubDef,
+																		  this.btnRODef,
+																		  this.groupBox1,
+																		  this.tbGroup,
+																		  this.lblGroup});
+			this.Font = new System.Drawing.Font("Tahoma", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.Name = "GroupDefFrm";
+			this.Text = "Group Definition";
+			this.groupBox1.ResumeLayout(false);
+			this.ResumeLayout(false);
+
+		}
+		#endregion
+		
+		private bool ProcessRROAccPageIDChange(VlnXmlElement mnuele, string newtmpl)
+		{
+			bool success;
+			XmlNode chldnode = (XmlNode) mnuele.FirstChild;
+			VlnXmlElement echild;
+			while (chldnode != null)
+			{
+				if (chldnode is VlnXmlElement)
+				{
+					echild = (VlnXmlElement) chldnode;
+					if (echild.Name != "vlnGroup")
+					{
+						// If this is a group defintion subtree it will only have one
+						// child, which is the text definition for the subgroup. Don't
+						// include these in the tree.
+						int levelCnt = chldnode.ChildNodes.Count;
+						string TheMenuTitle = echild.GetAttribute("MenuTitle");
+						if ((levelCnt > 1) || (levelCnt==1 && !TheMenuTitle.Equals("")))
+						{
+							string accid = echild.GetAccPageIDString(newtmpl);
+							echild.SetAttribute("AccPageID",accid);
+							success = myrodb.RODB_WriteRO(echild);
+							if (success==false) return false;
+						}
+					}
+				}
+				chldnode = chldnode.NextSibling;
+			}
+			return true;
+		}
+
+		private bool UpdateAccPageID(VlnXmlElement grp, string newtmpl, VlnStatusMessage StatMsgWindow)
+		{
+			// For this group and below in the xml tree, update Accessory Page ID using the new
+			// template.
+			bool success;
+			string haskids;
+			string kidsloaded;
+			XmlNode node = (XmlNode) grp.FirstChild;
+			VlnXmlElement child;
+			while (node != null) 
+			{
+				if (node is VlnXmlElement)
+				{
+					child = (VlnXmlElement) node;
+					
+					// If this is a group menu edit, process group nodes, otherwise
+					// process rros.
+
+					if (child.Name == "vlnGroup")
+					{
+						haskids = child.GetAttribute("HasChild");
+						kidsloaded = child.GetAttribute("ChildLoaded");
+						if (haskids == "True" && kidsloaded == "False" )
+						{
+							elem.SetAttribute("TreeNotData","True");
+							myrodb.RODB_GetChildData(child,true);
+							child.SetAttribute("ChildLoaded","True");
+						}
+						StatMsgWindow.StatusMessage = child.GetAttribute("MenuTitle"); 
+						success = UpdateAccPageID(child, newtmpl, StatMsgWindow);
+						if (success == false) return false;
+
+						success = ProcessRROAccPageIDChange(grp, newtmpl);
+						if (success==false)return false;
+					}
+				}
+				node = node.NextSibling;
+			}
+			success = ProcessRROAccPageIDChange(grp, newtmpl);
+			if (success==false) return false;
+			return true;
+		}
+		
+		private void btnOK_Click(object sender, System.EventArgs e)
+		{
+			// if the fields were disabled, just return. (Only need to check one of them)
+			if(this.tbGroup.Enabled == false) 
+			{
+				this.Close();
+				return;
+			}
+			// is this is a database level group, and is a user defined type, the
+			// accessory page value, fields in use & group fields in use must all be set.
+			// (doesn't need a prefix.
+			if (elem.ParentNode.Name == "RO_Root" && dbtype==3)   //3 is user defined.
+			{
+				string strattr;
+				strattr = elem.GetAttribute("FieldsInUse");
+				if (strattr == null || strattr=="") 
+				{
+					MessageBox.Show("No fields defined for Referenced Objects","Group Definition Error");
+					return;
+				}
+				strattr = this.tbValue.Text;
+				if (strattr == null || strattr=="")
+				{
+					MessageBox.Show("No Value defined for this group","Group Definition Error");
+					return;
+				}
+				strattr = elem.GetAttribute("GroupFieldsInUse");
+				if (strattr == null || strattr=="")
+				{
+					MessageBox.Show("No fields defined for subgroup","Group Definition Error");
+					return;
+				}
+			}
+			bool modaccpageid=false;
+			bool modified=false;
+			if ((elem.HasAttribute("AccPageID")&&this.tbValue.Text!=origValue) || this.tbValue.Modified)
+			{
+				string dummy = "";  // need for RODB_GetFIeldsInUse call, won't be used.
+				ArrayList AvailList, InUseList;
+				//first see if it is a valid 'InUse' Field.
+				AvailList = myrodb.RODB_GetFields(elem, (uint) RecordType.Schema);
+				InUseList = myrodb.RODB_GetFieldsInUse(elem, AvailList,"FieldsInUse", ref dummy, true);
+				int chkbracketo, chkbracketc;   // open & close bracket indexes
+				chkbracketo = this.tbValue.Text.IndexOf("<");
+				chkbracketc = this.tbValue.Text.IndexOf(">");														
+				if (chkbracketo == -1 || chkbracketc == -1) 
+				{
+					MessageBox.Show("Missing bracket (<or>) in value definition.");
+					return;
+				}
+				//if (chkbracketo != 0 || chkbracketc != this.tbValue.Text.Length-1)
+				//{
+				//	MessageBox.Show("Value definition contains extraneous text.");
+				//	return;
+				//}
+				// check for more than one field, don't allow this,
+				int twobrk = this.tbValue.Text.IndexOf("<",chkbracketo+1);
+				if (twobrk != -1)
+				{
+					MessageBox.Show("Cannot have two fields in accessory page id.");
+					return;
+				}
+				string val = this.tbValue.Text.Substring(chkbracketo+1,chkbracketc-chkbracketo-1);
+				// loop thru inuse list and see if it's there.
+				bool found = false;
+				for(int i=0; i<InUseList.Count; i++)
+				{
+					ROField rof = (ROField) InUseList[i];
+					string inusename = rof.GetFieldname;
+					if (inusename == val) 
+					{
+						found = true;
+						break;
+					}
+				}
+				if (found == false)
+				{
+					MessageBox.Show(this.tbValue.Text+" not in InUse field list");
+					return;
+				}
+				modified = true;
+				modaccpageid=true;
+				StringBuilder accidattr = new StringBuilder();
+				if (chkbracketo>0) 
+					accidattr.Append(this.tbValue.Text.Substring(0,chkbracketo+1)); // +1 include the "<"
+				else		
+					accidattr.Append("<");
+				accidattr.Append(CvtUserFldToFld(this.tbValue.Text.Substring(chkbracketo+1,chkbracketc-chkbracketo-1)));
+				if (chkbracketc>this.tbValue.Text.Length) 
+					accidattr.Append(this.tbValue.Text.Substring(chkbracketc+1,this.tbValue.Text.Length-chkbracketc+1));
+				else
+					accidattr.Append(">");
+				elem.SetAttribute("AccPageID",accidattr.ToString());
+//				elem.SetAttribute("AccPageID",CvtUserFldToFld(this.tbValue.Text));
+			
+			}
+			if (this.tbGroup.Text != origGroup)
+			{
+				XmlNode tmpn = (XmlNode) elem;
+				tmpn.FirstChild.Value = tmpn.FirstChild.Value.Replace(origGroup, this.tbGroup.Text);
+				modified=true;
+			}
+			if ((elem.HasAttribute("AccPageIDPrefix")&&this.tbPrefix.Text != origPrefix) || this.tbPrefix.Modified==true)
+			{
+				elem.SetAttribute("AccPageIDPrefix",this.tbPrefix.Text);
+				modified=true;
+			}
+			bool success=true;
+			if (modified==true) success = myrodb.RODB_WriteRO(elem);
+			if (modified == true && success == true && modaccpageid==true)
+			{
+				Cursor.Current = Cursors.WaitCursor;
+				VlnStatusMessage StatMsgWindow = new VlnStatusMessage("Status of Accessory Page ID Change");
+				success = UpdateAccPageID(elem, this.tbValue.Text,StatMsgWindow);
+				Cursor.Current = Cursors.Default;
+				StatMsgWindow.Dispose();
+			}
+			if (success == false)
+				MessageBox.Show("Could not save data.");
+			this.Close();
+		}
+
+		private void btnRODef_Click(object sender, System.EventArgs e)
+		{
+			RODefFrm rodef = new RODefFrm(elem,myrodb,"FieldsInUse", this.tbGroup.Text, dbtype);
+			rodef.ShowDialog();
+			// get accpageid, in case field name changed.
+			string accvalue = elem.GetAttribute("AccPageID");
+
+			VlnXmlElement parent;
+			parent = (VlnXmlElement) elem.ParentNode;
+			while (parent != null && accvalue=="")
+			{
+				// walk up tree to get parent.
+				if (accvalue == "") accvalue = parent.GetAttribute("AccPageID");
+				if (parent.Name != "RO_Root")
+					parent = (VlnXmlElement) parent.ParentNode;
+				else
+					parent = null;
+			}
+			if (accvalue != "")
+				this.tbValue.Text = CvtFldToUserFld(accvalue);
+			else
+				this.tbValue.Text = "";
+		}
+	
+		private void btnSubDef_Click(object sender, System.EventArgs e)
+		{
+			RODefFrm rodef = new RODefFrm(elem,myrodb,"GroupFieldsInUse", this.tbGroup.Text, dbtype);
+			rodef.ShowDialog();
+		}
+	}
+}

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/GroupDefFrm.resx

@@ -0,0 +1,102 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+            Microsoft ResX Schema 
+        
+            Version 1.3
+                
+            The primary goals of this format is to allow a simple XML format 
+            that is mostly human readable. The generation and parsing of the 
+            various data types are done through the TypeConverter classes 
+            associated with the data types.
+        
+            Example:
+        
+                ... ado.net/XML headers & schema ...
+                <resheader name="resmimetype">text/microsoft-resx</resheader>
+                <resheader name="version">1.3</resheader>
+                <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+                <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+                <data name="Name1">this is my long string</data>
+                <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+                <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+                    [base64 mime encoded serialized .NET Framework object]
+                </data>
+                <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+                    [base64 mime encoded string representing a byte array form of the .NET Framework object]
+                </data>
+        
+            There are any number of "resheader" rows that contain simple 
+            name/value pairs.
+            
+            Each data row contains a name, and value. The row also contains a 
+            type or mimetype. Type corresponds to a .NET class that support 
+            text/value conversion through the TypeConverter architecture. 
+            Classes that don't support this are serialized and stored with the 
+            mimetype set.
+                     
+            The mimetype is used for serialized objects, and tells the 
+            ResXResourceReader how to depersist the object. This is currently not 
+            extensible. For a given mimetype the value must be set accordingly:
+        
+            Note - application/x-microsoft.net.object.binary.base64 is the format 
+                   that the ResXResourceWriter will generate, however the reader can 
+                   read any of the formats listed below.
+        
+            mimetype: application/x-microsoft.net.object.binary.base64
+            value   : The object must be serialized with 
+                    : System.Serialization.Formatters.Binary.BinaryFormatter
+                    : and then encoded with base64 encoding.
+        
+            mimetype: application/x-microsoft.net.object.soap.base64
+            value   : The object must be serialized with 
+                    : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+                    : and then encoded with base64 encoding.
+            mimetype: application/x-microsoft.net.object.bytearray.base64
+            value   : The object must be serialized into a byte array 
+                    : using a System.ComponentModel.TypeConverter
+                    : and then encoded with base64 encoding.
+        -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>1.3</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="$this.Name">
+    <value>GroupDefFrm</value>
+  </data>
+</root>

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/GroupNewFrm.cs

@@ -0,0 +1,425 @@
+/*********************************************************************************************
+ * Copyright 2002 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: GroupNewFrm.cs $     $Revision: 7 $
+ * $Author: Kathy $   $Date: 5/07/03 1:58p $
+ *
+ * $History: GroupNewFrm.cs $
+ * 
+ * *****************  Version 7  *****************
+ * User: Kathy        Date: 5/07/03    Time: 1:58p
+ * Updated in $/EXE/RefObj/ROEditor
+ * B2003-033
+ * 
+ * *****************  Version 6  *****************
+ * User: Kathy        Date: 4/04/03    Time: 9:40a
+ * Updated in $/EXE/RefObj/ROEditor
+ * B2003-030: set HasChild Attribute for new group
+ * 
+ * *****************  Version 5  *****************
+ * User: Kathy        Date: 12/10/02   Time: 2:26p
+ * Updated in $/EXE/RefObj/ROEditor
+ * fieldname special char
+ * 
+ * *****************  Version 4  *****************
+ * User: Kathy        Date: 12/06/02   Time: 11:58a
+ * Updated in $/EXE/RefObj/ROEditor
+ * fix new table can't delete without exiting program
+ * 
+ * *****************  Version 3  *****************
+ * User: Kathy        Date: 12/02/02   Time: 8:30a
+ * Updated in $/EXE/RefObj/ROEditor
+ * fieldname replace chars
+ * 
+ * *****************  Version 2  *****************
+ * User: Kathy        Date: 10/17/02   Time: 11:35a
+ * Updated in $/EXE/RefObj/ROEditor
+ * don't save twice if continue selected to close
+ * 
+ * *****************  Version 1  *****************
+ * User: Kathy        Date: 10/15/02   Time: 2:24p
+ * Created in $/EXE/RefObj/ROEditor
+ * new hi level group, form & code
+ *********************************************************************************************/
+
+using System;
+using System.Drawing;
+using System.Collections;
+using System.ComponentModel;
+using System.Windows.Forms;
+using System.Xml;
+using System.Text;
+using ROFields;
+using RODBInterface;
+
+namespace ROEditor
+{
+	/// <summary>
+	/// Summary description for GroupNewFrm.
+	/// </summary>
+	public class GroupNewFrm : System.Windows.Forms.Form
+	{
+		private System.Windows.Forms.Button btnCancel;
+		private System.Windows.Forms.TextBox tbGroup;
+		private System.Windows.Forms.Label lblGroup;
+		private System.Windows.Forms.Button btnContinue;
+		private System.Windows.Forms.GroupBox groupBox1;
+		private System.Windows.Forms.RadioButton rbbtnUserDef;
+		private System.Windows.Forms.RadioButton rbbtnGraphics;
+		private System.Windows.Forms.RadioButton rbbtnSetpoint;
+		/// <summary>
+		/// Required designer variable.
+		/// </summary>
+		private System.ComponentModel.Container components = null;
+		private RODB myrodb;
+		private VlnXmlElement elem;
+		private string lastSavedGroup;
+		private VlnXmlElement nelem;    // new group element
+		private string tbname;			// new group table name
+		private string toprecid;		// new group master rec id
+
+		public GroupNewFrm(RODB rodb, VlnXmlElement topelem)
+		{
+			elem = topelem;
+			myrodb = rodb;
+			nelem = null;
+			toprecid = null;
+			tbname = null;
+			//
+			// Required for Windows Form Designer support
+			//
+			InitializeComponent();
+
+			//
+			// TODO: Add any constructor code after InitializeComponent call
+			//
+		}
+
+		/// <summary>
+		/// Clean up any resources being used.
+		/// </summary>
+		protected override void Dispose( bool disposing )
+		{
+			if( disposing )
+			{
+				if(components != null)
+				{
+					components.Dispose();
+				}
+			}
+			base.Dispose( disposing );
+		}
+
+		#region Windows Form Designer generated code
+		/// <summary>
+		/// Required method for Designer support - do not modify
+		/// the contents of this method with the code editor.
+		/// </summary>
+		private void InitializeComponent()
+		{
+			this.btnCancel = new System.Windows.Forms.Button();
+			this.btnContinue = new System.Windows.Forms.Button();
+			this.tbGroup = new System.Windows.Forms.TextBox();
+			this.lblGroup = new System.Windows.Forms.Label();
+			this.groupBox1 = new System.Windows.Forms.GroupBox();
+			this.rbbtnSetpoint = new System.Windows.Forms.RadioButton();
+			this.rbbtnGraphics = new System.Windows.Forms.RadioButton();
+			this.rbbtnUserDef = new System.Windows.Forms.RadioButton();
+			this.groupBox1.SuspendLayout();
+			this.SuspendLayout();
+			// 
+			// btnCancel
+			// 
+			this.btnCancel.DialogResult = System.Windows.Forms.DialogResult.Cancel;
+			this.btnCancel.Location = new System.Drawing.Point(176, 244);
+			this.btnCancel.Name = "btnCancel";
+			this.btnCancel.Size = new System.Drawing.Size(120, 24);
+			this.btnCancel.TabIndex = 10;
+			this.btnCancel.Text = "Cancel";
+			this.btnCancel.Click += new System.EventHandler(this.btnCancel_Click);
+			// 
+			// btnContinue
+			// 
+			this.btnContinue.Location = new System.Drawing.Point(40, 244);
+			this.btnContinue.Name = "btnContinue";
+			this.btnContinue.Size = new System.Drawing.Size(106, 24);
+			this.btnContinue.TabIndex = 9;
+			this.btnContinue.Text = "Continue";
+			this.btnContinue.Click += new System.EventHandler(this.btnContinue_Click);
+			// 
+			// tbGroup
+			// 
+			this.tbGroup.Location = new System.Drawing.Point(72, 8);
+			this.tbGroup.Name = "tbGroup";
+			this.tbGroup.Size = new System.Drawing.Size(248, 22);
+			this.tbGroup.TabIndex = 8;
+			this.tbGroup.Text = "";
+			// 
+			// lblGroup
+			// 
+			this.lblGroup.Location = new System.Drawing.Point(8, 8);
+			this.lblGroup.Name = "lblGroup";
+			this.lblGroup.Size = new System.Drawing.Size(56, 16);
+			this.lblGroup.TabIndex = 7;
+			this.lblGroup.Text = "Group:";
+			// 
+			// groupBox1
+			// 
+			this.groupBox1.Controls.AddRange(new System.Windows.Forms.Control[] {
+																					this.rbbtnSetpoint,
+																					this.rbbtnGraphics,
+																					this.rbbtnUserDef});
+			this.groupBox1.Location = new System.Drawing.Point(24, 56);
+			this.groupBox1.Name = "groupBox1";
+			this.groupBox1.Size = new System.Drawing.Size(288, 152);
+			this.groupBox1.TabIndex = 11;
+			this.groupBox1.TabStop = false;
+			this.groupBox1.Text = "Group Type";
+			// 
+			// rbbtnSetpoint
+			// 
+			this.rbbtnSetpoint.Location = new System.Drawing.Point(48, 64);
+			this.rbbtnSetpoint.Name = "rbbtnSetpoint";
+			this.rbbtnSetpoint.Size = new System.Drawing.Size(184, 24);
+			this.rbbtnSetpoint.TabIndex = 2;
+			this.rbbtnSetpoint.Text = "Setpoint Database";
+			// 
+			// rbbtnGraphics
+			// 
+			this.rbbtnGraphics.Location = new System.Drawing.Point(48, 96);
+			this.rbbtnGraphics.Name = "rbbtnGraphics";
+			this.rbbtnGraphics.Size = new System.Drawing.Size(184, 24);
+			this.rbbtnGraphics.TabIndex = 1;
+			this.rbbtnGraphics.TabStop = true;
+			this.rbbtnGraphics.Text = "Graphics Database";
+			// 
+			// rbbtnUserDef
+			// 
+			this.rbbtnUserDef.Location = new System.Drawing.Point(48, 32);
+			this.rbbtnUserDef.Name = "rbbtnUserDef";
+			this.rbbtnUserDef.Size = new System.Drawing.Size(184, 24);
+			this.rbbtnUserDef.TabIndex = 0;
+			this.rbbtnUserDef.Text = "User Defined Database";
+			// 
+			// GroupNewFrm
+			// 
+			this.AutoScaleBaseSize = new System.Drawing.Size(6, 15);
+			this.ClientSize = new System.Drawing.Size(376, 273);
+			this.Controls.AddRange(new System.Windows.Forms.Control[] {
+																		  this.groupBox1,
+																		  this.btnCancel,
+																		  this.btnContinue,
+																		  this.tbGroup,
+																		  this.lblGroup});
+			this.Font = new System.Drawing.Font("Tahoma", 9F);
+			this.Name = "GroupNewFrm";
+			this.Text = "New Group (Database)";
+			this.Load += new System.EventHandler(this.GroupNewFrm_Load);
+			this.groupBox1.ResumeLayout(false);
+			this.ResumeLayout(false);
+
+		}
+		#endregion
+
+		private void GroupNewFrm_Load(object sender, System.EventArgs e)
+		{
+		
+		}
+
+		private string CvtUserFldToFld(string fldname)
+		{
+			if (fldname.Length < 2)
+				return fldname;
+			// a digit cannot start an xml fieldname, prepend a "__" to it.
+			string tmp0;
+			if (char.IsDigit(fldname,0))
+				tmp0 = "__" + fldname;
+			else
+				tmp0 = fldname;
+			// an xml fieldname cannot have a space, change it to a "__"
+			string tmpstr = tmp0.Replace(" ","__");
+			int len = tmpstr.Length;
+			int cnt = 0;
+
+			// this is also our sequence that tells us the follow 3 digits is the ascii number (base 10)
+			// of the character we replaced.
+			string OKpunch = "-._"; 
+
+			string outstr = "";
+			int decval;
+
+			while (cnt < len)
+			{
+				char tmpchr = tmpstr[cnt];
+				if(!char.IsLetterOrDigit(tmpchr)&& (OKpunch.IndexOf(tmpchr) == -1) )
+				{
+					decval = tmpchr;
+					outstr += OKpunch + decval.ToString("D3");
+				}
+				else
+				{
+					outstr += tmpchr.ToString();
+				}
+				cnt++;
+			}
+			return outstr;
+		}
+
+		private void btnCancel_Click(object sender, System.EventArgs e)
+		{
+			if (toprecid != null)
+			{
+				myrodb.RODB_DeleteGroup((XmlNode)nelem,tbname,toprecid);
+			}
+			if(nelem!=null)
+			{
+				XmlNode par = (XmlNode)nelem.ParentNode;
+				par.RemoveChild((XmlNode)nelem);
+			}
+		}
+
+		private void btnContinue_Click(object sender, System.EventArgs e)
+		{
+			bool success;
+			if (this.tbGroup.Text == null || this.tbGroup.Text == "")
+			{
+				MessageBox.Show("Need to specify group name.");
+				return;
+			}
+			// if this was already saved, i.e. user hit continue button already,
+			// just return;
+			if (this.tbGroup.Text == lastSavedGroup) 
+			{
+				this.Close();
+				return;
+			}
+			lastSavedGroup = this.tbGroup.Text;
+			int dbtype=-1;
+			if (this.rbbtnGraphics.Checked == true) dbtype = 1;
+			else if (this.rbbtnSetpoint.Checked == true) dbtype = 2;
+			else if (this.rbbtnUserDef.Checked == true) dbtype = 3;
+			if (dbtype<0)
+			{
+				MessageBox.Show("Need to define type of group.");
+				return;
+			}
+			Cursor.Current = Cursors.WaitCursor;
+			// make a new table with the next table name id
+			tbname = myrodb.RODB_GetNextGroupTable();
+			if (tbname == null) 
+			{
+				Cursor.Current = Cursors.Default;
+				return;
+			}
+			toprecid = myrodb.RODB_AddNewTable(tbname, this.tbGroup.Text);
+			if (toprecid == null) 
+			{
+				Cursor.Current = Cursors.Default;
+				return;
+			}
+			// for the given type, copy over the required fields.
+			success = myrodb.RODB_CopyFieldDefs("ROMaster",tbname,dbtype);
+			if (success == false) 
+			{
+				Cursor.Current = Cursors.Default;
+				return;
+			}
+			// create top level group node with input name.
+			nelem = (VlnXmlElement) elem.OwnerDocument.CreateElement("vlnGroup");
+			nelem.InnerText = CvtUserFldToFld(this.tbGroup.Text);
+			nelem.SetAttribute("Table",tbname);
+			nelem.SetAttribute("ParentID", "00000000");
+			string nrecid = myrodb.RODB_GetNextRecId(tbname);
+			nelem.SetAttribute("RecID", nrecid);
+			elem.AppendChild((XmlNode) nelem);
+			success = myrodb.RODB_InsertGroup(nelem);
+			Cursor.Current = Cursors.Default;
+			if (success == false) return;
+			nelem.SetAttribute("TreeNotData", "True");
+			nelem.SetAttribute("MenuTitle", this.tbGroup.Text);
+			nelem.SetAttribute("MasterRecID",toprecid);
+			nelem.SetAttribute("HasChild", "False");
+			
+			// if this is a setpoint db or image db, get fields and find those fields needed
+			// to define ro & group. This is hardcoded, yuk.
+			if(dbtype == 1 || dbtype == 2)
+			{
+				ArrayList FieldList = myrodb.RODB_GetFields(nelem, (uint) RecordType.Schema);
+				string[] fldlist=null, grplist=null;
+				ROField rof;
+				string curfld;
+				StringBuilder Inuse = new StringBuilder();
+				// Get list of inuse fields for the rro.
+				if (dbtype == 1)
+					fldlist = new string[] {"Name", "Image ID", "Image"};
+				else
+					fldlist = new string[] {"Setpoint ID", "Setpoint Value", "Associated System Component", "Applicability", "Revision", "Short Description",
+					  "Description", "Key Assumptions", "Basis", "References"};
+				for (int i=0; i< fldlist.Length; i++)
+				{
+					curfld = fldlist[i];
+					for (int j=0; j<FieldList.Count; j++)
+					{
+						rof = (ROField) FieldList[j];
+						if (rof.GetFieldname == curfld)
+						{
+							if (i==fldlist.Length-1) // last one don't add ' '
+								Inuse.Append(rof.GetRecID);
+							else
+								Inuse.Append(rof.GetRecID+" ");
+							break;
+						}
+					}
+				}
+				nelem.SetAttribute("FieldsInUse", Inuse.ToString());
+				
+				// Get list of group inuse fields.
+				Inuse.Remove(0,Inuse.Length);
+				if (dbtype == 1)
+					grplist = new string[] {"Group"};
+				else
+					grplist = new string[] {"Parameter"};
+				for (int i=0; i< grplist.Length; i++)
+				{
+					curfld = grplist[i];
+					for (int j=0; j<FieldList.Count; j++)
+					{
+						rof = (ROField) FieldList[j];
+						if (rof.GetFieldname == curfld)
+						{
+							if (i == grplist.Length-1) // last, don't add ' '
+								Inuse.Append(rof.GetRecID);
+							else
+								Inuse.Append(rof.GetRecID+" ");
+							break;
+						}
+					}
+				}
+				nelem.SetAttribute("GroupFieldsInUse", Inuse.ToString());
+				if (dbtype == 2)  // Setpoint
+				{
+					nelem.SetAttribute("RetVal","<Setpoint__Value>");
+					nelem.SetAttribute("MenuItem","<Setpoint__Value,5,17> <Short__Description>");
+					nelem.SetAttribute("GroupMenuItem","<Parameter>");
+					nelem.SetAttribute("AccPageIDPrefix","SP2");
+					nelem.SetAttribute("AccPageID","<Setpoint__ID>");
+				}
+				else if (dbtype == 1)  // image
+				{
+					nelem.SetAttribute("RetVal","<Image>");
+					nelem.SetAttribute("MenuItem","<Name>");
+					nelem.SetAttribute("GroupMenuItem","<Group>");
+					nelem.SetAttribute("AccPageIDPrefix","IG2");
+					nelem.SetAttribute("AccPageID","<Image__ID>");
+				}
+				success = myrodb.RODB_WriteRO(nelem);
+				if (success == false) return;
+			}
+
+			// now let the user specify the group name, etc to define the group.
+			GroupDefFrm grdef = new GroupDefFrm(nelem,myrodb,nelem.InnerText,dbtype);
+			grdef.ShowDialog();
+		}
+	}
+}

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/GroupNewFrm.resx

@@ -0,0 +1,102 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+            Microsoft ResX Schema 
+        
+            Version 1.3
+                
+            The primary goals of this format is to allow a simple XML format 
+            that is mostly human readable. The generation and parsing of the 
+            various data types are done through the TypeConverter classes 
+            associated with the data types.
+        
+            Example:
+        
+                ... ado.net/XML headers & schema ...
+                <resheader name="resmimetype">text/microsoft-resx</resheader>
+                <resheader name="version">1.3</resheader>
+                <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+                <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+                <data name="Name1">this is my long string</data>
+                <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+                <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+                    [base64 mime encoded serialized .NET Framework object]
+                </data>
+                <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+                    [base64 mime encoded string representing a byte array form of the .NET Framework object]
+                </data>
+        
+            There are any number of "resheader" rows that contain simple 
+            name/value pairs.
+            
+            Each data row contains a name, and value. The row also contains a 
+            type or mimetype. Type corresponds to a .NET class that support 
+            text/value conversion through the TypeConverter architecture. 
+            Classes that don't support this are serialized and stored with the 
+            mimetype set.
+                     
+            The mimetype is used for serialized objects, and tells the 
+            ResXResourceReader how to depersist the object. This is currently not 
+            extensible. For a given mimetype the value must be set accordingly:
+        
+            Note - application/x-microsoft.net.object.binary.base64 is the format 
+                   that the ResXResourceWriter will generate, however the reader can 
+                   read any of the formats listed below.
+        
+            mimetype: application/x-microsoft.net.object.binary.base64
+            value   : The object must be serialized with 
+                    : System.Serialization.Formatters.Binary.BinaryFormatter
+                    : and then encoded with base64 encoding.
+        
+            mimetype: application/x-microsoft.net.object.soap.base64
+            value   : The object must be serialized with 
+                    : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+                    : and then encoded with base64 encoding.
+            mimetype: application/x-microsoft.net.object.bytearray.base64
+            value   : The object must be serialized into a byte array 
+                    : using a System.ComponentModel.TypeConverter
+                    : and then encoded with base64 encoding.
+        -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>1.3</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="$this.Name">
+    <value>GroupNewFrm</value>
+  </data>
+</root>

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/Properties/Resources.Designer.cs

@@ -0,0 +1,70 @@
+//------------------------------------------------------------------------------
+// <auto-generated>
+//     This code was generated by a tool.
+//     Runtime Version:2.0.50727.4234
+//
+//     Changes to this file may cause incorrect behavior and will be lost if
+//     the code is regenerated.
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+namespace ROEditor.Properties {
+    using System;
+    
+    
+    /// <summary>
+    ///   A strongly-typed resource class, for looking up localized strings, etc.
+    /// </summary>
+    // This class was auto-generated by the StronglyTypedResourceBuilder
+    // class via a tool like ResGen or Visual Studio.
+    // To add or remove a member, edit your .ResX file then rerun ResGen
+    // with the /str option, or rebuild your VS project.
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "2.0.0.0")]
+    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    internal class Resources {
+        
+        private static global::System.Resources.ResourceManager resourceMan;
+        
+        private static global::System.Globalization.CultureInfo resourceCulture;
+        
+        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
+        internal Resources() {
+        }
+        
+        /// <summary>
+        ///   Returns the cached ResourceManager instance used by this class.
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Resources.ResourceManager ResourceManager {
+            get {
+                if (object.ReferenceEquals(resourceMan, null)) {
+                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("ROEditor.Properties.Resources", typeof(Resources).Assembly);
+                    resourceMan = temp;
+                }
+                return resourceMan;
+            }
+        }
+        
+        /// <summary>
+        ///   Overrides the current thread's CurrentUICulture property for all
+        ///   resource lookups using this strongly typed resource class.
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Globalization.CultureInfo Culture {
+            get {
+                return resourceCulture;
+            }
+            set {
+                resourceCulture = value;
+            }
+        }
+        
+        internal static System.Drawing.Bitmap Red_V_txt_NB_bur_1984 {
+            get {
+                object obj = ResourceManager.GetObject("Red_V_txt_NB_bur_1984", resourceCulture);
+                return ((System.Drawing.Bitmap)(obj));
+            }
+        }
+    }
+}

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/Properties/Resources.resx

@@ -0,0 +1,124 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <assembly alias="System.Windows.Forms" name="System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
+  <data name="Red_V_txt_NB_bur_1984" type="System.Resources.ResXFileRef, System.Windows.Forms">
+    <value>..\Red_V_txt_NB_bur_1984.png;System.Drawing.Bitmap, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a</value>
+  </data>
+</root>

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/RODefFrm.resx

@@ -0,0 +1,102 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+            Microsoft ResX Schema 
+        
+            Version 1.3
+                
+            The primary goals of this format is to allow a simple XML format 
+            that is mostly human readable. The generation and parsing of the 
+            various data types are done through the TypeConverter classes 
+            associated with the data types.
+        
+            Example:
+        
+                ... ado.net/XML headers & schema ...
+                <resheader name="resmimetype">text/microsoft-resx</resheader>
+                <resheader name="version">1.3</resheader>
+                <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+                <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+                <data name="Name1">this is my long string</data>
+                <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+                <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+                    [base64 mime encoded serialized .NET Framework object]
+                </data>
+                <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+                    [base64 mime encoded string representing a byte array form of the .NET Framework object]
+                </data>
+        
+            There are any number of "resheader" rows that contain simple 
+            name/value pairs.
+            
+            Each data row contains a name, and value. The row also contains a 
+            type or mimetype. Type corresponds to a .NET class that support 
+            text/value conversion through the TypeConverter architecture. 
+            Classes that don't support this are serialized and stored with the 
+            mimetype set.
+                     
+            The mimetype is used for serialized objects, and tells the 
+            ResXResourceReader how to depersist the object. This is currently not 
+            extensible. For a given mimetype the value must be set accordingly:
+        
+            Note - application/x-microsoft.net.object.binary.base64 is the format 
+                   that the ResXResourceWriter will generate, however the reader can 
+                   read any of the formats listed below.
+        
+            mimetype: application/x-microsoft.net.object.binary.base64
+            value   : The object must be serialized with 
+                    : System.Serialization.Formatters.Binary.BinaryFormatter
+                    : and then encoded with base64 encoding.
+        
+            mimetype: application/x-microsoft.net.object.soap.base64
+            value   : The object must be serialized with 
+                    : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+                    : and then encoded with base64 encoding.
+            mimetype: application/x-microsoft.net.object.bytearray.base64
+            value   : The object must be serialized into a byte array 
+                    : using a System.ComponentModel.TypeConverter
+                    : and then encoded with base64 encoding.
+        -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>1.3</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="$this.Name">
+    <value>RODefFrm</value>
+  </data>
+</root>

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/ROEditor.csproj

@@ -0,0 +1,198 @@
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup>
+    <ProjectType>Local</ProjectType>
+    <ProductVersion>8.0.50727</ProductVersion>
+    <SchemaVersion>2.0</SchemaVersion>
+    <ProjectGuid>{3A4A3543-2D44-11D6-8452-00A0CC271352}</ProjectGuid>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ApplicationIcon>App.ico</ApplicationIcon>
+    <AssemblyKeyContainerName>
+    </AssemblyKeyContainerName>
+    <AssemblyName>ROEditor</AssemblyName>
+    <AssemblyOriginatorKeyFile>
+    </AssemblyOriginatorKeyFile>
+    <DefaultClientScript>JScript</DefaultClientScript>
+    <DefaultHTMLPageLayout>Grid</DefaultHTMLPageLayout>
+    <DefaultTargetSchema>IE50</DefaultTargetSchema>
+    <DelaySign>false</DelaySign>
+    <OutputType>WinExe</OutputType>
+    <RootNamespace>ROEditor</RootNamespace>
+    <RunPostBuildEvent>OnBuildSuccess</RunPostBuildEvent>
+    <StartupObject>ROEditor.Form1</StartupObject>
+    <FileUpgradeFlags>
+    </FileUpgradeFlags>
+    <UpgradeBackupLocation>
+    </UpgradeBackupLocation>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <OutputPath>bin\Debug\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>true</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <NoStdLib>false</NoStdLib>
+    <NoWarn>
+    </NoWarn>
+    <Optimize>false</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>full</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <OutputPath>bin\Release\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>TRACE;Upgrade2005;</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>false</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <NoStdLib>false</NoStdLib>
+    <NoWarn>
+    </NoWarn>
+    <Optimize>true</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>none</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System">
+      <Name>System</Name>
+    </Reference>
+    <Reference Include="System.Data">
+      <Name>System.Data</Name>
+    </Reference>
+    <Reference Include="System.Drawing">
+      <Name>System.Drawing</Name>
+    </Reference>
+    <Reference Include="System.Windows.Forms">
+      <Name>System.Windows.Forms</Name>
+    </Reference>
+    <Reference Include="System.Xml">
+      <Name>System.XML</Name>
+    </Reference>
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="About.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="AssemblyInfo.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="FieldCombFrm.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="FieldTextFrm.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="FieldTypeDefFrm.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="GroupDefFrm.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="GroupNewFrm.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="RODefFrm.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="ROEditor.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="RO_FST.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <EmbeddedResource Include="About.resx">
+      <DependentUpon>About.cs</DependentUpon>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+    <EmbeddedResource Include="FieldCombFrm.resx">
+      <DependentUpon>FieldCombFrm.cs</DependentUpon>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+    <EmbeddedResource Include="FieldTextFrm.resx">
+      <DependentUpon>FieldTextFrm.cs</DependentUpon>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+    <EmbeddedResource Include="FieldTypeDefFrm.resx">
+      <DependentUpon>FieldTypeDefFrm.cs</DependentUpon>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+    <EmbeddedResource Include="GroupDefFrm.resx">
+      <DependentUpon>GroupDefFrm.cs</DependentUpon>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+    <EmbeddedResource Include="GroupNewFrm.resx">
+      <DependentUpon>GroupNewFrm.cs</DependentUpon>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+    <EmbeddedResource Include="RODefFrm.resx">
+      <DependentUpon>RODefFrm.cs</DependentUpon>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+    <EmbeddedResource Include="ROEditor.ico" />
+    <EmbeddedResource Include="ROEditor.resx">
+      <DependentUpon>ROEditor.cs</DependentUpon>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+    <Content Include="AboutBckgnd_370x209.bmp" />
+    <Content Include="App.ico" />
+    <Content Include="Cert_prt_rgb_70x32.gif" />
+    <Content Include="ROGROUPYellow.ICO" />
+    <None Include="app.config" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\..\..\LibSource\ctlXMLEditLib\ctlXMLEditLib.csproj">
+      <Project>{DECA8343-6351-11D6-8487-00A0CC271352}</Project>
+      <Name>ctlXMLEditLib</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\..\..\LibSource\DBEncapsulation\DBEncapsulation.csproj">
+      <Project>{6D44F537-879E-11D6-84B8-00A0CC271352}</Project>
+      <Name>DBEncapsulation</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\..\..\LibSource\Org.Mentalis.Files\Org.Mentalis.Files.csproj">
+      <Project>{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}</Project>
+      <Name>Org.Mentalis.Files</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\..\..\LibSource\RODBInterface\RODBInterface.csproj">
+      <Project>{0C7825FD-AA05-11D6-84D1-00A0CC271352}</Project>
+      <Name>RODBInterface</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\..\..\LibSource\ROField\ROFields.csproj">
+      <Project>{0C782592-AA05-11D6-84D1-00A0CC271352}</Project>
+      <Name>ROFields</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\..\..\LibSource\ROFST\ROFST.csproj">
+      <Project>{134D8938-9CDC-4712-9444-D5DCC6638AB6}</Project>
+      <Name>ROFST</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\..\..\LibSource\VlnStatus\VlnStatus.csproj">
+      <Project>{551CB7B3-00B1-11D7-8590-482B59000000}</Project>
+      <Name>VlnStatus</Name>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
+  <PropertyGroup>
+    <PreBuildEvent>
+    </PreBuildEvent>
+    <PostBuildEvent>
+    </PostBuildEvent>
+  </PropertyGroup>
+</Project>

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/ROEditor.resx

@@ -0,0 +1,249 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <metadata name="imageListRoTree.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
+    <value>124, 17</value>
+  </metadata>
+  <data name="imageListRoTree.ImageStream" mimetype="application/x-microsoft.net.object.binary.base64">
+    <value>
+        AAEAAAD/////AQAAAAAAAAAMAgAAAFdTeXN0ZW0uV2luZG93cy5Gb3JtcywgVmVyc2lvbj0yLjAuMC4w
+        LCBDdWx0dXJlPW5ldXRyYWwsIFB1YmxpY0tleVRva2VuPWI3N2E1YzU2MTkzNGUwODkFAQAAACZTeXN0
+        ZW0uV2luZG93cy5Gb3Jtcy5JbWFnZUxpc3RTdHJlYW1lcgEAAAAERGF0YQcCAgAAAAkDAAAADwMAAACE
+        CAAAAk1TRnQBSQFMAgEBAgEAAQQBAAEEAQABEAEAARABAAT/AQkBAAj/AUIBTQE2AQQGAAE2AQQCAAEo
+        AwABQAMAARADAAEBAQABCAYAAQQYAAGAAgABgAMAAoABAAGAAwABgAEAAYABAAKAAgADwAEAAcAB3AHA
+        AQAB8AHKAaYBAAEzBQABMwEAATMBAAEzAQACMwIAAxYBAAMcAQADIgEAAykBAANVAQADTQEAA0IBAAM5
+        AQABgAF8Af8BAAJQAf8BAAGTAQAB1gEAAf8B7AHMAQABxgHWAe8BAAHWAucBAAGQAakBrQIAAf8BMwMA
+        AWYDAAGZAwABzAIAATMDAAIzAgABMwFmAgABMwGZAgABMwHMAgABMwH/AgABZgMAAWYBMwIAAmYCAAFm
+        AZkCAAFmAcwCAAFmAf8CAAGZAwABmQEzAgABmQFmAgACmQIAAZkBzAIAAZkB/wIAAcwDAAHMATMCAAHM
+        AWYCAAHMAZkCAALMAgABzAH/AgAB/wFmAgAB/wGZAgAB/wHMAQABMwH/AgAB/wEAATMBAAEzAQABZgEA
+        ATMBAAGZAQABMwEAAcwBAAEzAQAB/wEAAf8BMwIAAzMBAAIzAWYBAAIzAZkBAAIzAcwBAAIzAf8BAAEz
+        AWYCAAEzAWYBMwEAATMCZgEAATMBZgGZAQABMwFmAcwBAAEzAWYB/wEAATMBmQIAATMBmQEzAQABMwGZ
+        AWYBAAEzApkBAAEzAZkBzAEAATMBmQH/AQABMwHMAgABMwHMATMBAAEzAcwBZgEAATMBzAGZAQABMwLM
+        AQABMwHMAf8BAAEzAf8BMwEAATMB/wFmAQABMwH/AZkBAAEzAf8BzAEAATMC/wEAAWYDAAFmAQABMwEA
+        AWYBAAFmAQABZgEAAZkBAAFmAQABzAEAAWYBAAH/AQABZgEzAgABZgIzAQABZgEzAWYBAAFmATMBmQEA
+        AWYBMwHMAQABZgEzAf8BAAJmAgACZgEzAQADZgEAAmYBmQEAAmYBzAEAAWYBmQIAAWYBmQEzAQABZgGZ
+        AWYBAAFmApkBAAFmAZkBzAEAAWYBmQH/AQABZgHMAgABZgHMATMBAAFmAcwBmQEAAWYCzAEAAWYBzAH/
+        AQABZgH/AgABZgH/ATMBAAFmAf8BmQEAAWYB/wHMAQABzAEAAf8BAAH/AQABzAEAApkCAAGZATMBmQEA
+        AZkBAAGZAQABmQEAAcwBAAGZAwABmQIzAQABmQEAAWYBAAGZATMBzAEAAZkBAAH/AQABmQFmAgABmQFm
+        ATMBAAGZATMBZgEAAZkBZgGZAQABmQFmAcwBAAGZATMB/wEAApkBMwEAApkBZgEAA5kBAAKZAcwBAAKZ
+        Af8BAAGZAcwCAAGZAcwBMwEAAWYBzAFmAQABmQHMAZkBAAGZAswBAAGZAcwB/wEAAZkB/wIAAZkB/wEz
+        AQABmQHMAWYBAAGZAf8BmQEAAZkB/wHMAQABmQL/AQABzAMAAZkBAAEzAQABzAEAAWYBAAHMAQABmQEA
+        AcwBAAHMAQABmQEzAgABzAIzAQABzAEzAWYBAAHMATMBmQEAAcwBMwHMAQABzAEzAf8BAAHMAWYCAAHM
+        AWYBMwEAAZkCZgEAAcwBZgGZAQABzAFmAcwBAAGZAWYB/wEAAcwBmQIAAcwBmQEzAQABzAGZAWYBAAHM
+        ApkBAAHMAZkBzAEAAcwBmQH/AQACzAIAAswBMwEAAswBZgEAAswBmQEAA8wBAALMAf8BAAHMAf8CAAHM
+        Af8BMwEAAZkB/wFmAQABzAH/AZkBAAHMAf8BzAEAAcwC/wEAAcwBAAEzAQAB/wEAAWYBAAH/AQABmQEA
+        AcwBMwIAAf8CMwEAAf8BMwFmAQAB/wEzAZkBAAH/ATMBzAEAAf8BMwH/AQAB/wFmAgAB/wFmATMBAAHM
+        AmYBAAH/AWYBmQEAAf8BZgHMAQABzAFmAf8BAAH/AZkCAAH/AZkBMwEAAf8BmQFmAQAB/wKZAQAB/wGZ
+        AcwBAAH/AZkB/wEAAf8BzAIAAf8BzAEzAQAB/wHMAWYBAAH/AcwBmQEAAf8CzAEAAf8BzAH/AQAC/wEz
+        AQABzAH/AWYBAAL/AZkBAAL/AcwBAAJmAf8BAAFmAf8BZgEAAWYC/wEAAf8CZgEAAf8BZgH/AQAC/wFm
+        AQABIQEAAaUBAANfAQADdwEAA4YBAAOWAQADywEAA7IBAAPXAQAD3QEAA+MBAAPqAQAD8QEAA/gBAAHw
+        AfsB/wEAAaQCoAEAA4ADAAH/AgAB/wMAAv8BAAH/AwAB/wEAAf8BAAL/AgAD/xIAAv8CAAT5KAAPegEA
+        Av8I+SYAA3oCAAF6AwAGegEAAv8D+QMAA/klAAJ6AQAC/wX5AQAEegEAAv8B+QEACPkkAAJ6AQAC/wb5
+        AQADegEAAv8BAAT5AwAC+SQAAnoBAAL/AQADegP5A3oBAAL/A/kGAAL5AewiAAJ6AQAC/wR6AQAC+QN6
+        AQAC/wL5BwAC+QLsIQACegEAAv8EegEAAvkDegEAAv8BBwH5BwAC+QLsIQACegEAAv8EegEAAvkDegEA
+        Av8BAAEHBgAD+QLsIQACegEAA/8DAAL/AfkDegEAA/8BBwYAAvkBAALsIQACegEACP8EegEABP8FAAL/
+        AfkD7CEAAnoBAAH/AgAE/wV6AQAL/wEHAfkB7CIAD3oBAAL/AQAH/wMHAfkiAA96AwAB7AUABQciAAH/
+        BnoBAAj/AgACBwHsAQAHByMAAv8FAAn/MAABQgFNAT4HAAE+AwABKAMAAUADAAEQAwABAQEAAQEFAAGA
+        FwAD/wMAARABHwcAAQ8HAAEHBwABAwcAAQEGAAEBAeAGAAEDAeAGAAEHAeAGAAEHAeAGAAEHAcAGAAED
+        AYAPAAEBBwABAwYAAYABBwYAAcYBHwQACw==
+</value>
+  </data>
+  <metadata name="mainMenu1.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
+    <value>17, 17</value>
+  </metadata>
+  <metadata name="imageListToolBar.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
+    <value>256, 17</value>
+  </metadata>
+  <data name="imageListToolBar.ImageStream" mimetype="application/x-microsoft.net.object.binary.base64">
+    <value>
+        AAEAAAD/////AQAAAAAAAAAMAgAAAFdTeXN0ZW0uV2luZG93cy5Gb3JtcywgVmVyc2lvbj0yLjAuMC4w
+        LCBDdWx0dXJlPW5ldXRyYWwsIFB1YmxpY0tleVRva2VuPWI3N2E1YzU2MTkzNGUwODkFAQAAACZTeXN0
+        ZW0uV2luZG93cy5Gb3Jtcy5JbWFnZUxpc3RTdHJlYW1lcgEAAAAERGF0YQcCAgAAAAkDAAAADwMAAAAe
+        CwAAAk1TRnQBSQFMAgEBBgEAAQwBAAEEAQABEAEAARABAAT/AQkBAAj/AUIBTQE2AQQGAAE2AQQCAAEo
+        AwABQAMAASADAAEBAQABCAYAAQgYAAGAAgABgAMAAoABAAGAAwABgAEAAYABAAKAAgADwAEAAcAB3AHA
+        AQAB8AHKAaYBAAEzBQABMwEAATMBAAEzAQACMwIAAxYBAAMcAQADIgEAAykBAANVAQADTQEAA0IBAAM5
+        AQABgAF8Af8BAAJQAf8BAAGTAQAB1gEAAf8B7AHMAQABxgHWAe8BAAHWAucBAAGQAakBrQIAAf8BMwMA
+        AWYDAAGZAwABzAIAATMDAAIzAgABMwFmAgABMwGZAgABMwHMAgABMwH/AgABZgMAAWYBMwIAAmYCAAFm
+        AZkCAAFmAcwCAAFmAf8CAAGZAwABmQEzAgABmQFmAgACmQIAAZkBzAIAAZkB/wIAAcwDAAHMATMCAAHM
+        AWYCAAHMAZkCAALMAgABzAH/AgAB/wFmAgAB/wGZAgAB/wHMAQABMwH/AgAB/wEAATMBAAEzAQABZgEA
+        ATMBAAGZAQABMwEAAcwBAAEzAQAB/wEAAf8BMwIAAzMBAAIzAWYBAAIzAZkBAAIzAcwBAAIzAf8BAAEz
+        AWYCAAEzAWYBMwEAATMCZgEAATMBZgGZAQABMwFmAcwBAAEzAWYB/wEAATMBmQIAATMBmQEzAQABMwGZ
+        AWYBAAEzApkBAAEzAZkBzAEAATMBmQH/AQABMwHMAgABMwHMATMBAAEzAcwBZgEAATMBzAGZAQABMwLM
+        AQABMwHMAf8BAAEzAf8BMwEAATMB/wFmAQABMwH/AZkBAAEzAf8BzAEAATMC/wEAAWYDAAFmAQABMwEA
+        AWYBAAFmAQABZgEAAZkBAAFmAQABzAEAAWYBAAH/AQABZgEzAgABZgIzAQABZgEzAWYBAAFmATMBmQEA
+        AWYBMwHMAQABZgEzAf8BAAJmAgACZgEzAQADZgEAAmYBmQEAAmYBzAEAAWYBmQIAAWYBmQEzAQABZgGZ
+        AWYBAAFmApkBAAFmAZkBzAEAAWYBmQH/AQABZgHMAgABZgHMATMBAAFmAcwBmQEAAWYCzAEAAWYBzAH/
+        AQABZgH/AgABZgH/ATMBAAFmAf8BmQEAAWYB/wHMAQABzAEAAf8BAAH/AQABzAEAApkCAAGZATMBmQEA
+        AZkBAAGZAQABmQEAAcwBAAGZAwABmQIzAQABmQEAAWYBAAGZATMBzAEAAZkBAAH/AQABmQFmAgABmQFm
+        ATMBAAGZATMBZgEAAZkBZgGZAQABmQFmAcwBAAGZATMB/wEAApkBMwEAApkBZgEAA5kBAAKZAcwBAAKZ
+        Af8BAAGZAcwCAAGZAcwBMwEAAWYBzAFmAQABmQHMAZkBAAGZAswBAAGZAcwB/wEAAZkB/wIAAZkB/wEz
+        AQABmQHMAWYBAAGZAf8BmQEAAZkB/wHMAQABmQL/AQABzAMAAZkBAAEzAQABzAEAAWYBAAHMAQABmQEA
+        AcwBAAHMAQABmQEzAgABzAIzAQABzAEzAWYBAAHMATMBmQEAAcwBMwHMAQABzAEzAf8BAAHMAWYCAAHM
+        AWYBMwEAAZkCZgEAAcwBZgGZAQABzAFmAcwBAAGZAWYB/wEAAcwBmQIAAcwBmQEzAQABzAGZAWYBAAHM
+        ApkBAAHMAZkBzAEAAcwBmQH/AQACzAIAAswBMwEAAswBZgEAAswBmQEAA8wBAALMAf8BAAHMAf8CAAHM
+        Af8BMwEAAZkB/wFmAQABzAH/AZkBAAHMAf8BzAEAAcwC/wEAAcwBAAEzAQAB/wEAAWYBAAH/AQABmQEA
+        AcwBMwIAAf8CMwEAAf8BMwFmAQAB/wEzAZkBAAH/ATMBzAEAAf8BMwH/AQAB/wFmAgAB/wFmATMBAAHM
+        AmYBAAH/AWYBmQEAAf8BZgHMAQABzAFmAf8BAAH/AZkCAAH/AZkBMwEAAf8BmQFmAQAB/wKZAQAB/wGZ
+        AcwBAAH/AZkB/wEAAf8BzAIAAf8BzAEzAQAB/wHMAWYBAAH/AcwBmQEAAf8CzAEAAf8BzAH/AQAC/wEz
+        AQABzAH/AWYBAAL/AZkBAAL/AcwBAAJmAf8BAAFmAf8BZgEAAWYC/wEAAf8CZgEAAf8BZgH/AQAC/wFm
+        AQABIQEAAaUBAANfAQADdwEAA4YBAAOWAQADywEAA7IBAAPXAQAD3QEAA+MBAAPqAQAD8QEAA/gBAAHw
+        AfsB/wEAAaQCoAEAA4ADAAH/AgAB/wMAAv8BAAH/AwAB/wEAAf8BAAL/AgAD/wEAIAcgACAHIAAHBwkE
+        CwcB/wIAAgcgAAcHAQQH/wEECgcB/wMAAgcgAAcHAQQB/wUAAf8BBAkHAf8DAAMHIAABBwYAAQQH/wEE
+        BAcEAAH/AwAEByAAAQcBAAX/AQQB/wUAAf8BBAMHAQAE/wMABQcgAAEHAQAB/wQAAQQH/wEEAgcBAAH/
+        Af4DBwH/AQAGByAAAQcBAAX/AQQB/wIAAf8EBAEHAQAB/wEHAf8B/gMHAf8BAAUHIAABBwEAAf8EAAEE
+        BP8BBAH/AQQCBwEAAf8B/gEHAf8B/gIHAf8BAAUHIAABBwEABf8BBAT/AgQDBwEAAf8BBwH+AQcB/wH+
+        AQcB/wEABQcgAAEHAQAB/wIAAf8BAAYEBAcBAAH/AgcB/gEHAf8BBwH/AQAFByAAAQcBAAT/AQAB/wEA
+        CQcBAAH/AgcB/gEHAf8BAAYHIAABBwEABP8CAAsHAQAE/wEABwcgAAEHBgANBwQACAcgACAHIAABBw//
+        MAcC/w0AAf8FBwf/CgcF/xUHAf8BAAIDBgAC/wEAAQMBAAH/AwcC/wf5Af8JBwH/BPoC/woHCQQB/wEA
+        AgMGAAL/AQABAwEAAf8DBwH/AvkFBwL5Af8IBwH/BfoBAgH/CQcBBAf/AQQB/wEAAgMGAAL/AQABAwEA
+        Af8DBwH/AvkGBwH5Af8IBwH/BPoBAgH6AQIB7AgHAQQB/wUAAf8BBAH/AQACAwkAAQMBAAH/AgcB/wH5
+        Af8C+QYHAfkB/wcHBf8B+gICAf8CBwYAAQQH/wEEAf8BAAwDAQAB/wIHAf8B+QEHAf8C+QUHAfkB/wsH
+        AewC/wECAf8CBwEABf8BBAH/BQAB/wEEAf8BAAIDCAACAwEAAf8CBwH/AfkCBwH/AvkEBwH5Af8FBwH/
+        BgcC7AL/AgcBAAH/BAABBAf/AQQB/wEAAQMBAAj/AQABAwEAAf8CBwH/AfkDBwH/AvkDBwH5Af8EBwL/
+        BQcB7AL/AQIB/wIHAQAF/wEEAf8CAAH/BAQB/wEAAQMBAAH/BgcB/wEAAQMBAAH/AgcB/wH5BAcB/wL5
+        AgcB+QH/AwcB/wH6B/8B+gICAf8CBwEAAf8EAAEEBP8BBAH/AQQBBwH/AQABAwEAAf8GBwH/AQABAwEA
+        Af8CBwH/AfkFBwH/AvkBBwH5Af8CBwH/CfoBAgH6AQIB7AIHAQAF/wEEBP8CBAIHAf8BAAEDAQAB/wYH
+        Af8BAAEDAQAB/wMHAf8B+QUHAf8C+QH/AgcB/wv6AQIB/wMHAQAB/wIAAf8BAAYEAwcB/wEAAQMBAAj/
+        AwAB/wMHAf8C+QUHAf8B+QH/AwcB/wf6BP8EBwEABP8BAAH/AQAHBwH/AQABAwoAAQcBAAH/BAcB/wf5
+        Af8FBwH/AfoH/wYHAQAE/wIACAcB/w4AAf8FBwf/BwcC/wwHBgAJBxD/FAcB/xsHAUIBTQE+BwABPgMA
+        ASgDAAFAAwABIAMAAQEBAAEBBgABARYAA///AAIACw==
+</value>
+  </data>
+  <metadata name="$this.TrayHeight" type="System.Int32, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>36</value>
+  </metadata>
+  <assembly alias="System.Drawing" name="System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
+  <data name="$this.Icon" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+    <value>
+        AAABAAEAICAQAAAAAADoAgAAFgAAACgAAAAgAAAAQAAAAAEABAAAAAAAAAIAAAAAAAAAAAAAEAAAABAA
+        AAAAAAAAAACAAACAAAAAgIAAgAAAAIAAgACAgAAAgICAAMDAwAAAAP8AAP8AAAD//wD/AAAA/wD/AP//
+        AAD///8AAAAAAAAAAAAAAAAAAAAAAA//8AAAmZmZmQAAAAAAAAAP//AJmZmZmZmZkAAAAAAAD//wmZmZ
+        mZmZmZkAAAAAAA//8JmZmZmZmZmZkAAAAAAP//CZmZAAAAmZmZkAAAAAD//wmZAJeXlwCZmZkAAAAA//
+        8JkHl5eXl5CZmZkAAAAP//CQeXl5eXl5CZmZAAAAD//wB5eXl5AAAACZmQkAAA//8Hl5eXAAAAAAmZmQ
+        kAAP//CXl5AAAAAAAAmZkHkAD//weXkAAAAAAAAJmZCXAA//8JeXAAAAAAAACZmQeXAP//B5eQAAAAAA
+        AAmZkJeQD//wh5AAAAAAAAAJmZB5cA//8HhwAAAAAAAACZmQl5AP//8HgAAAAAAAAJmZkHlwD///CHAA
+        AAAAAACZmQeXkA////CAAAAAAAAPmZkJeXAP////AAAAAAAA//mZB5eQD/////AAAAAAD///kHl5cA//
+        ////8AAAD////wmXlwAP//////////////CHmXkAD//w//////////8IeHmXAA//8A/////////wh4eH
+        kAAP//CAAP////8ACHh4eAAAAAAAeAcAAAAAh4eHh4AAAAB4eAeAeHh4eHh4eHgAAAAAB4eAcAeHh4eH
+        h4eAAAAAAAB4eAAACHh4eHgAAAAAAAAAAAAAAAAAAAAAAAAAAAADwD//AgAH/wAAA/8AAAH/AAAA/wAA
+        AH8AAAA/AAAAHwAAAA8AAAAHAAH4AwAH/AEAD/wBAB/8AAAf/AAAP/wAAD/8AAA/+AAAP/gAAD/wAAA/
+        4AAAH4AAAAAAAQAAAAEAAAABAAAAAwAAAAcAAAAPgAAAH8AAAD/gIAB/8DgD/w==
+</value>
+  </data>
+</root>

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/ROEditor.sln

@@ -0,0 +1,146 @@
+Microsoft Visual Studio Solution File, Format Version 9.00
+# Visual Studio 2005
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "ROEditor", "ROEditor.csproj", "{3A4A3543-2D44-11D6-8452-00A0CC271352}"
+	ProjectSection(ProjectDependencies) = postProject
+		{6D44F537-879E-11D6-84B8-00A0CC271352} = {6D44F537-879E-11D6-84B8-00A0CC271352}
+		{DECA8343-6351-11D6-8487-00A0CC271352} = {DECA8343-6351-11D6-8487-00A0CC271352}
+		{0C782592-AA05-11D6-84D1-00A0CC271352} = {0C782592-AA05-11D6-84D1-00A0CC271352}
+		{551CB7B3-00B1-11D7-8590-482B59000000} = {551CB7B3-00B1-11D7-8590-482B59000000}
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352} = {0C7825FD-AA05-11D6-84D1-00A0CC271352}
+	EndProjectSection
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "VlnStatus", "..\..\..\LibSource\VlnStatus\VlnStatus.csproj", "{551CB7B3-00B1-11D7-8590-482B59000000}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "ROFields", "..\..\..\LibSource\ROField\ROFields.csproj", "{0C782592-AA05-11D6-84D1-00A0CC271352}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DBEncapsulation", "..\..\..\LibSource\DBEncapsulation\DBEncapsulation.csproj", "{6D44F537-879E-11D6-84B8-00A0CC271352}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "RODBInterface", "..\..\..\LibSource\RODBInterface\RODBInterface.csproj", "{0C7825FD-AA05-11D6-84D1-00A0CC271352}"
+	ProjectSection(ProjectDependencies) = postProject
+		{6D44F537-879E-11D6-84B8-00A0CC271352} = {6D44F537-879E-11D6-84B8-00A0CC271352}
+		{0C782592-AA05-11D6-84D1-00A0CC271352} = {0C782592-AA05-11D6-84D1-00A0CC271352}
+		{551CB7B3-00B1-11D7-8590-482B59000000} = {551CB7B3-00B1-11D7-8590-482B59000000}
+	EndProjectSection
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "ctlXMLEditLib", "..\..\..\LibSource\ctlXMLEditLib\ctlXMLEditLib.csproj", "{DECA8343-6351-11D6-8487-00A0CC271352}"
+	ProjectSection(ProjectDependencies) = postProject
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352} = {0C7825FD-AA05-11D6-84D1-00A0CC271352}
+	EndProjectSection
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "VlnProfiler", "..\..\..\LibSource\VlnProfiler\VlnProfiler.csproj", "{38044313-1E5E-4F20-A9E7-3CBDDDCADCDC}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "ROFST", "..\..\..\LibSource\ROFST\ROFST.csproj", "{134D8938-9CDC-4712-9444-D5DCC6638AB6}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Org.Mentalis.Files", "..\..\..\LibSource\Org.Mentalis.Files\Org.Mentalis.Files.csproj", "{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Utils", "..\..\..\LibSource\Utils\Utils.csproj", "{680054D3-49C4-40E7-92A5-67B97DCE6308}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Debug|Mixed Platforms = Debug|Mixed Platforms
+		Debug|Win32 = Debug|Win32
+		Release|Any CPU = Release|Any CPU
+		Release|Mixed Platforms = Release|Mixed Platforms
+		Release|Win32 = Release|Win32
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{3A4A3543-2D44-11D6-8452-00A0CC271352}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{3A4A3543-2D44-11D6-8452-00A0CC271352}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{3A4A3543-2D44-11D6-8452-00A0CC271352}.Debug|Mixed Platforms.ActiveCfg = Debug|Any CPU
+		{3A4A3543-2D44-11D6-8452-00A0CC271352}.Debug|Mixed Platforms.Build.0 = Debug|Any CPU
+		{3A4A3543-2D44-11D6-8452-00A0CC271352}.Debug|Win32.ActiveCfg = Debug|Any CPU
+		{3A4A3543-2D44-11D6-8452-00A0CC271352}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{3A4A3543-2D44-11D6-8452-00A0CC271352}.Release|Any CPU.Build.0 = Release|Any CPU
+		{3A4A3543-2D44-11D6-8452-00A0CC271352}.Release|Mixed Platforms.ActiveCfg = Release|Any CPU
+		{3A4A3543-2D44-11D6-8452-00A0CC271352}.Release|Mixed Platforms.Build.0 = Release|Any CPU
+		{3A4A3543-2D44-11D6-8452-00A0CC271352}.Release|Win32.ActiveCfg = Release|Any CPU
+		{551CB7B3-00B1-11D7-8590-482B59000000}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{551CB7B3-00B1-11D7-8590-482B59000000}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{551CB7B3-00B1-11D7-8590-482B59000000}.Debug|Mixed Platforms.ActiveCfg = Debug|Any CPU
+		{551CB7B3-00B1-11D7-8590-482B59000000}.Debug|Mixed Platforms.Build.0 = Debug|Any CPU
+		{551CB7B3-00B1-11D7-8590-482B59000000}.Debug|Win32.ActiveCfg = Debug|Any CPU
+		{551CB7B3-00B1-11D7-8590-482B59000000}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{551CB7B3-00B1-11D7-8590-482B59000000}.Release|Any CPU.Build.0 = Release|Any CPU
+		{551CB7B3-00B1-11D7-8590-482B59000000}.Release|Mixed Platforms.ActiveCfg = Release|Any CPU
+		{551CB7B3-00B1-11D7-8590-482B59000000}.Release|Win32.ActiveCfg = Release|Any CPU
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Debug|Mixed Platforms.ActiveCfg = Debug|Any CPU
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Debug|Mixed Platforms.Build.0 = Debug|Any CPU
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Debug|Win32.ActiveCfg = Debug|Any CPU
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Release|Any CPU.Build.0 = Release|Any CPU
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Release|Mixed Platforms.ActiveCfg = Release|Any CPU
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Release|Win32.ActiveCfg = Release|Any CPU
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Debug|Mixed Platforms.ActiveCfg = Debug|Any CPU
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Debug|Mixed Platforms.Build.0 = Debug|Any CPU
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Debug|Win32.ActiveCfg = Debug|Any CPU
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Release|Any CPU.Build.0 = Release|Any CPU
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Release|Mixed Platforms.ActiveCfg = Release|Any CPU
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Release|Win32.ActiveCfg = Release|Any CPU
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Debug|Mixed Platforms.ActiveCfg = Debug|Any CPU
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Debug|Mixed Platforms.Build.0 = Debug|Any CPU
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Debug|Win32.ActiveCfg = Debug|Any CPU
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Release|Any CPU.Build.0 = Release|Any CPU
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Release|Mixed Platforms.ActiveCfg = Release|Any CPU
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Release|Win32.ActiveCfg = Release|Any CPU
+		{DECA8343-6351-11D6-8487-00A0CC271352}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{DECA8343-6351-11D6-8487-00A0CC271352}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{DECA8343-6351-11D6-8487-00A0CC271352}.Debug|Mixed Platforms.ActiveCfg = Debug|Any CPU
+		{DECA8343-6351-11D6-8487-00A0CC271352}.Debug|Mixed Platforms.Build.0 = Debug|Any CPU
+		{DECA8343-6351-11D6-8487-00A0CC271352}.Debug|Win32.ActiveCfg = Debug|Any CPU
+		{DECA8343-6351-11D6-8487-00A0CC271352}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{DECA8343-6351-11D6-8487-00A0CC271352}.Release|Any CPU.Build.0 = Release|Any CPU
+		{DECA8343-6351-11D6-8487-00A0CC271352}.Release|Mixed Platforms.ActiveCfg = Release|Any CPU
+		{DECA8343-6351-11D6-8487-00A0CC271352}.Release|Win32.ActiveCfg = Release|Any CPU
+		{38044313-1E5E-4F20-A9E7-3CBDDDCADCDC}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{38044313-1E5E-4F20-A9E7-3CBDDDCADCDC}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{38044313-1E5E-4F20-A9E7-3CBDDDCADCDC}.Debug|Mixed Platforms.ActiveCfg = Debug|Any CPU
+		{38044313-1E5E-4F20-A9E7-3CBDDDCADCDC}.Debug|Mixed Platforms.Build.0 = Debug|Any CPU
+		{38044313-1E5E-4F20-A9E7-3CBDDDCADCDC}.Debug|Win32.ActiveCfg = Debug|Any CPU
+		{38044313-1E5E-4F20-A9E7-3CBDDDCADCDC}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{38044313-1E5E-4F20-A9E7-3CBDDDCADCDC}.Release|Any CPU.Build.0 = Release|Any CPU
+		{38044313-1E5E-4F20-A9E7-3CBDDDCADCDC}.Release|Mixed Platforms.ActiveCfg = Release|Any CPU
+		{38044313-1E5E-4F20-A9E7-3CBDDDCADCDC}.Release|Win32.ActiveCfg = Release|Any CPU
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Debug|Mixed Platforms.ActiveCfg = Debug|Any CPU
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Debug|Mixed Platforms.Build.0 = Debug|Any CPU
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Debug|Win32.ActiveCfg = Debug|Any CPU
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Release|Any CPU.Build.0 = Release|Any CPU
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Release|Mixed Platforms.ActiveCfg = Release|Any CPU
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Release|Mixed Platforms.Build.0 = Release|Any CPU
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Release|Win32.ActiveCfg = Release|Any CPU
+		{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}.Debug|Mixed Platforms.ActiveCfg = Debug|Any CPU
+		{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}.Debug|Mixed Platforms.Build.0 = Debug|Any CPU
+		{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}.Debug|Win32.ActiveCfg = Debug|Any CPU
+		{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}.Release|Any CPU.Build.0 = Release|Any CPU
+		{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}.Release|Mixed Platforms.ActiveCfg = Release|Any CPU
+		{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}.Release|Mixed Platforms.Build.0 = Release|Any CPU
+		{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}.Release|Win32.ActiveCfg = Release|Any CPU
+		{680054D3-49C4-40E7-92A5-67B97DCE6308}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{680054D3-49C4-40E7-92A5-67B97DCE6308}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{680054D3-49C4-40E7-92A5-67B97DCE6308}.Debug|Mixed Platforms.ActiveCfg = Debug|Any CPU
+		{680054D3-49C4-40E7-92A5-67B97DCE6308}.Debug|Mixed Platforms.Build.0 = Debug|Any CPU
+		{680054D3-49C4-40E7-92A5-67B97DCE6308}.Debug|Win32.ActiveCfg = Debug|Any CPU
+		{680054D3-49C4-40E7-92A5-67B97DCE6308}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{680054D3-49C4-40E7-92A5-67B97DCE6308}.Release|Any CPU.Build.0 = Release|Any CPU
+		{680054D3-49C4-40E7-92A5-67B97DCE6308}.Release|Mixed Platforms.ActiveCfg = Release|Any CPU
+		{680054D3-49C4-40E7-92A5-67B97DCE6308}.Release|Mixed Platforms.Build.0 = Release|Any CPU
+		{680054D3-49C4-40E7-92A5-67B97DCE6308}.Release|Win32.ActiveCfg = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/RO_FST.cs

@@ -0,0 +1,876 @@
+/*********************************************************************************************
+ * Copyright 2002 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: RO_FST.cs $     $Revision: 15 $
+ * $Author: Jsj $   $Date: 8/23/06 11:33a $
+ *
+ * $History: RO_FST.cs $
+ * 
+ * *****************  Version 15  *****************
+ * User: Jsj          Date: 8/23/06    Time: 11:33a
+ * Updated in $/EXE/RefObj/ROEditor
+ * debug statements commented out
+ * 
+ * *****************  Version 14  *****************
+ * User: Jsj          Date: 5/03/05    Time: 11:48a
+ * Updated in $/EXE/RefObj/ROEditor
+ * 2005 upgrade, move some ROFST logic to ROFST library
+ * 
+ * *****************  Version 13  *****************
+ * User: Jsj          Date: 5/11/04    Time: 9:29a
+ * Updated in $/EXE/RefObj/ROEditor
+ * Bug fix B2004-011, could not create FST file if user opened nodes on
+ * tree.
+ * 
+ * *****************  Version 12  *****************
+ * User: Jsj          Date: 4/08/04    Time: 9:48a
+ * Updated in $/EXE/RefObj/ROEditor
+ * Modified code to speed up the creation of the RO.FST file
+ * 
+ * *****************  Version 11  *****************
+ * User: Jsj          Date: 6/30/03    Time: 1:20p
+ * Updated in $/EXE/RefObj/ROEditor
+ * a NULL Accessory Page ID  was giving problems in creating a new RO.FST
+ * file.
+ * 
+ * *****************  Version 10  *****************
+ * User: Kathy        Date: 6/11/03    Time: 2:01p
+ * Updated in $/EXE/RefObj/ROEditor
+ * Fix bug B2003-045
+ * 
+ * *****************  Version 9  *****************
+ * User: Kathy        Date: 5/30/03    Time: 12:48p
+ * Updated in $/EXE/RefObj/ROEditor
+ * B2003-044: sync up xml with UI tree view
+ * 
+ * *****************  Version 8  *****************
+ * User: Kathy        Date: 5/21/03    Time: 12:51p
+ * Updated in $/EXE/RefObj/ROEditor
+ * B2003-034: process data if only one field for RO & also, convert return
+ * value for xml save
+ * 
+ * *****************  Version 7  *****************
+ * User: Jsj          Date: 4/14/03    Time: 3:02p
+ * Updated in $/EXE/RefObj/ROEditor
+ * Speed up the creation of the RO.FST file
+ * 
+ * *****************  Version 6  *****************
+ * User: Kathy        Date: 4/04/03    Time: 9:41a
+ * Updated in $/EXE/RefObj/ROEditor
+ * B2003-030 convert new top group name to user readable for ro.fst
+ * 
+ * *****************  Version 5  *****************
+ * User: Jsj          Date: 2/21/03    Time: 9:51a
+ * Updated in $/EXE/RefObj/ROEditor
+ * added RO FST completed message
+ * 
+ * *****************  Version 4  *****************
+ * User: Jsj          Date: 1/02/03    Time: 9:31a
+ * Updated in $/EXE/RefObj/ROEditor
+ * Save Graphics file date in RO.FST file
+ * 
+ * *****************  Version 3  *****************
+ * User: Jsj          Date: 12/17/02   Time: 4:54p
+ * Updated in $/EXE/RefObj/ROEditor
+ * save real date for graphic files
+ * 
+ * *****************  Version 2  *****************
+ * User: Jsj          Date: 12/06/02   Time: 3:26p
+ * Updated in $/EXE/RefObj/ROEditor
+ * parameter display data fix (ingoring this data for now)
+ * 
+ * *****************  Version 1  *****************
+ * User: Jsj          Date: 11/27/02   Time: 12:53p
+ * Created in $/EXE/RefObj/ROEditor
+ * Modification to create the RO.FST file
+ *********************************************************************************************/
+
+using System;
+using System.Drawing;
+using System.Collections;
+using System.ComponentModel;
+using System.Windows.Forms;
+using System.Data;
+using System.Xml;
+using System.Xml.Schema;
+using System.Text;
+using System.IO;
+using RODBInterface;
+using System.Runtime.InteropServices;
+using VlnStatus;
+using System.Collections.Specialized;
+using ROFST_FILE;
+
+//using VlnProfiler; //don't forget to add VlnProfiler to the reference list
+
+namespace ROEditor
+{
+	/// <summary>
+	/// This creates an RO.FST file
+	/// </summary>
+
+	class FstTmpSTRC
+	{
+		public ushort thistype;
+		public uint thisoff;
+		public string title;
+
+		public FstTmpSTRC(ushort type, uint offset, string tl)
+		{
+			thistype = type;
+			thisoff = offset;
+			title = tl;
+		}
+
+		void WriteString(BinaryWriter bw, string str)
+		{
+			int n=str.Length;
+			byte [] b = new byte[n+1];
+			for(int i =0; i < n; i++)
+			{
+				b[i] = (byte)str[i];
+			}
+			bw.Write(b,0,n+1); // +1 to include null
+			/**
+			byte nullbyte = 0;
+			int i;
+			for(i =0; i < str.Length; i++)
+			{
+				byte WrByte;
+				WrByte = (byte)str[i];
+				bw.Write(WrByte);
+			}
+			bw.Write(nullbyte);
+***/
+		}
+
+		public void Write(BinaryWriter bw)
+		{
+			bw.Write(thisoff);
+			bw.Write(thistype);
+			WriteString(bw,title);
+		}
+	}
+
+// The Sorted Array was not sorting via the ASCII value of each character in a given string.
+// This sorting function compares two strings by doing a character by character comparison.
+	public class MyComparer : IComparer
+	{
+		public int Compare (object x, object y)
+		{
+			int rtnval = 0;
+			int xcnt=0,ycnt=0;
+			int xlen,ylen;
+			byte xbyte, ybyte;
+			string xbuff = x.ToString();
+			string ybuff = y.ToString();
+			xlen = xbuff.Length;
+			ylen = ybuff.Length;
+			if (xbuff[0] == '<')
+				rtnval = 0;
+			if (ybuff[0] == '<')
+				rtnval = 0;
+			while ((rtnval==0) && ((xcnt < xlen) || (ycnt < ylen)))
+			{
+				xbyte = (xcnt == xlen)? (byte)0 : (byte)xbuff[xcnt++];
+				ybyte = (ycnt == ylen)? (byte)0 : (byte)ybuff[ycnt++];
+				rtnval = xbyte - ybyte;
+			}
+				
+			return rtnval;
+		}
+	}
+
+
+	public class RO_FST
+	{
+		private FST_FileHeader FstHeader;
+		private string FstDir; // path to the RO directory
+		private string FstPath; // RO directory Path and RO.FST file name
+		private string FstOld; // ROFST.Old file name (backup of previous fst file)
+		private string FstNew; // ROFST.New hold the RO.FST info during creation
+
+		private BinaryWriter fhFST; // write handle to FST file being created
+
+		private VlnStatusBar StatusWin;
+
+		private RODB ROdatabase;
+
+		private XmlDocument FSTroXmlDoc;
+//		private HybridDictionary dicTiming;
+//		private HybridDictionary dicDuration;
+
+		ushort widestAcPgId;
+		SortedList IdsAndAccPgIds;
+		SortedList IdsAndOffsets;
+
+		ushort AllTypesUsed;
+
+		private Stack InUseListStack;
+		private Stack RtnValTmplateStack;
+//		private DateTime dtLast=DateTime.Now;
+
+		public RO_FST(RODB TheROdb, XmlDocument TheXmlDoc)
+		{
+			ROdatabase = TheROdb; // point to the RO database
+			FSTroXmlDoc = TheXmlDoc;
+		}
+		public bool Create()
+		{
+			bool RtnStat = true;
+//			dicDuration=new HybridDictionary();
+//			dicTiming=new HybridDictionary();
+//			Profiler.Reset();
+			// position to the top of the tree
+			//			CurrentNode = roTree.TopNode;
+
+			// Setup the paths to the FST files
+			FstDir = Directory.GetCurrentDirectory();
+			FstPath = FstDir + "\\RO.FST";
+			FstOld = FstDir + "\\ROFST.Old";
+			FstNew = FstDir + "\\ROFST.New";
+
+			// open a temporary file for building the RO.FST
+			try
+			{
+				fhFST = new BinaryWriter(File.Open(FstNew,System.IO.FileMode.Create,System.IO.FileAccess.ReadWrite));
+			}
+			catch (Exception fhExc)
+			{
+				string errmsg = fhExc.Message;
+				MessageBox.Show(errmsg,"Error Creating RO.FST file",System.Windows.Forms.MessageBoxButtons.OK);
+				RtnStat = false;
+			}
+
+			// If we were able to open a new ROFST.NEW file then go ahead and put the
+			// new FST information into it.
+			if (RtnStat)
+				RtnStat = BuildNewRoFST();
+
+			if (RtnStat) // successful in creating new RO FST file?
+			{
+				//If an RO.FST file already exists,
+				// rename the existing file for safe keeping
+				if (File.Exists(FstPath))
+				{
+					// copy the existing RO.FST to ROFST.OLD
+					// - overrite ROFST.OLD if it already exists
+					File.Copy(FstPath,FstOld,true); // save RO.FST as ROFST.OLD
+					File.Delete(FstPath);  // remove RO.FST
+				}
+				File.Copy(FstNew,FstPath,true); // save ROFST.NEW as RO.fST
+				File.Delete(FstNew); // remove ROFST.NEW
+				MessageBox.Show("New RO.FST file created successfully.","Create RO.FST file",System.Windows.Forms.MessageBoxButtons.OK);
+			}
+//			MessageBox.Show(Profiler.ToString("000.00%"),"Timings");
+//			dicDuration=null;
+//			dicTiming=null;
+			return RtnStat;
+		}
+
+
+		private bool BuildNewRoFST()
+		{
+			bool RtnVal = true;
+			int i;
+			int numDatabases;
+			// write the empty header - save space for the header info
+			FstHeader = new FST_FileHeader();
+			FstHeader.Write(fhFST);
+
+			// point to the ROMASTER and get the number of databases it has
+			VlnXmlElement ROdbtables = (VlnXmlElement) FSTroXmlDoc.FirstChild;
+			numDatabases = ROdbtables.ChildNodes.Count;
+
+			// Allocate a list of database info structures
+			ROFST_DbInfo[] dbinfo = new ROFST_DbInfo[numDatabases];
+			//For each RO database, process each group
+			XmlNode  ROtableNode = ROdbtables;
+			ROtableNode = ROtableNode.FirstChild;
+			StatusWin = new VlnStatusBar("Creating RO.FST file");
+			for (i=0; i < numDatabases && RtnVal; i++)
+			{
+				dbinfo[i] = new ROFST_DbInfo();
+				RtnVal = SaveToFSTFile(ROtableNode,dbinfo[i]);
+				dbinfo[i].dbiType = AllTypesUsed;
+				ROtableNode = ROtableNode.NextSibling;
+			}
+
+			if (RtnVal)
+			{
+				VlnXmlElement tblnode = (VlnXmlElement) ROdbtables.FirstChild;
+				StatusWin.BarMax = numDatabases * 2;
+				StatusWin.BarStepValue = 1;
+				StatusWin.BarValue = 0;
+				// All of the RO database, group, and return value information
+				//  was saved to the FST file.  Now save the information needed
+				//  to read the FST file.
+
+				// Save DB list
+				uint lngbuf = 0;
+				uint dblength = (uint)fhFST.BaseStream.Position;
+
+				fhFST.Write(lngbuf);
+
+				ushort intbuf = Convert.ToUInt16(numDatabases);
+				fhFST.Write(intbuf);
+
+				// The old code did a sizeof() on a structure containing the ROFSTDatabaseInfo (dbi)
+				// You cannot read/write a Struct type in C# like you can with C++.  The C# books suggest
+				// creating a Class to replace the Struct, then create methods that perform the binary
+				// read/write.  So I created a method that calculates the "struct" size to simulate the
+				// sizeof(struct dbi)
+				uint lngval = (dbinfo[0].GetStructSize()) * (uint)numDatabases;
+
+				for (i=0; i<numDatabases; i++)
+				{
+					StatusWin.PerformStep();
+					dbinfo[i].WriteUntAndShort(fhFST);
+					fhFST.Write(lngval);
+					lngval += (uint)dbinfo[i].dbiTitle.Length+1;
+					fhFST.Write(lngval);
+					lngval += (uint)dbinfo[i].dbiAP.Length+1;
+				}
+
+				// write the titles and accessory page ids
+				for (i=0; i<numDatabases;i++)
+				{
+					tblnode.SetAttribute("TreeNotData","True");
+					StatusWin.PerformStep();
+					dbinfo[i].WriteStrings(fhFST);
+					tblnode = (VlnXmlElement) tblnode.NextSibling;
+				}
+
+				int dbend = (int)fhFST.BaseStream.Position;
+				fhFST.Seek((int)dblength,System.IO.SeekOrigin.Begin);
+				lngbuf = (uint)(dbend-dblength-4);//sizeof(dblength);
+				fhFST.Write(lngbuf);
+				fhFST.Seek(0,System.IO.SeekOrigin.Begin);
+
+				// save the header information
+				FstHeader.SetHeader(dblength);
+				FstHeader.Write(fhFST);
+
+				// Close the status window
+				StatusWin.Dispose();
+
+				// close tmporary FST file
+				fhFST.Close();
+			}
+
+			return RtnVal;
+		}
+
+		private string CvtFldToUserFld(string fldname)
+		{
+			string tmpstr0;
+			if (fldname.Length < 2) return fldname;
+			// an xml element name cannot begin with a digit. we had prepended a "__"
+			if (fldname.Substring(0,2) == "__" && char.IsDigit(fldname,2))
+				tmpstr0 = fldname.Substring(2,fldname.Length-2);
+			else
+				tmpstr0 = fldname;
+			// an xml element name cannot have a space, we converted to a "__"
+			string tmpstr = tmpstr0.Replace("__"," ");
+			int len = tmpstr.Length;
+			int cur = 0;
+
+			// this is also our sequence that tells us the follow 3 digits is the ascii number (base 10)
+			// of the character we replaced.
+			string OKpunch = "-._"; 
+
+			string outstr = "";
+			int decval, indx;
+			if (tmpstr.Length <6)
+				indx = -1;
+			else
+				indx=tmpstr.IndexOf(OKpunch,cur);
+			string asc_spchar;
+			while (indx>=0)
+			{
+				outstr += tmpstr.Substring(cur,indx-cur);
+				asc_spchar = tmpstr.Substring(indx+3,3);
+				decval = System.Convert.ToInt16(asc_spchar,10);
+				outstr += System.Convert.ToChar(decval).ToString();
+				cur = indx+6;
+				if (cur+6 > len)
+					indx = -1;
+				else
+					indx = tmpstr.IndexOf(OKpunch,cur);
+			}
+			if (cur<len) outstr += tmpstr.Substring(cur,len-cur);	
+
+			return outstr;
+		}
+
+		// If any of the nodes on the user interface tree were open,
+		// the group info for those nodes were aleady read.
+		// To speed up the RO.FST file creation, remove these read in 
+		// child nodes so the the code can do one big database read
+		// to get all of the child info for a high level group, instead
+		// of many database reads (one for each lower level group).
+		private void RemoveGroupChildNodes(XmlNode TheROtableNode)
+		{
+			VlnXmlElement elem = (VlnXmlElement) TheROtableNode;
+			string strHasChild = elem.GetAttribute("HasChild");
+			string strChildLoaded = elem.GetAttribute("ChildLoaded");
+
+			if (strHasChild.Equals("True") && strChildLoaded.Equals("True"))
+			{
+				VlnXmlElement kid, delkid;
+				XmlNode chldNode = TheROtableNode.FirstChild;
+				while (chldNode != null)
+				{
+					delkid = null;
+					if (chldNode is VlnXmlElement)
+					{
+						kid = (VlnXmlElement) chldNode;
+						if (kid.HasAttribute("RecID"))delkid = kid;
+					}
+					chldNode = chldNode.NextSibling;
+					if (delkid != null) elem.RemoveChild(delkid);
+				}
+				elem.SetAttribute("ChildLoaded","False");
+			}
+		}
+
+		private bool SaveToFSTFile(XmlNode TheROtableNode,ROFST_DbInfo Thedbinfo)
+		{
+//			Profiler.Start("Startup");
+			bool RtnVal = false;
+			IComparer StrCompare = new MyComparer();
+			IdsAndAccPgIds = new SortedList(StrCompare);
+			IdsAndOffsets = new SortedList();
+			VlnXmlElement elem = (VlnXmlElement) TheROtableNode;
+
+			// Save The Database Filename NUMBER (EX 02 FOR RO000002)
+			// note that the number part of the filename is in base 10, NOT base 16!
+			string tablename = elem.GetAttribute("Table");
+			ushort shorttmp = System.Convert.ToUInt16(tablename.Substring(2),10);
+			Thedbinfo.dbiID = shorttmp; 
+
+			// Save the database title
+			Thedbinfo.dbiTitle = CvtFldToUserFld(elem.FirstChild.InnerText);
+			StatusWin.StatusBoxTitle = "Processing " + Thedbinfo.dbiTitle;
+
+			// Save the Accessory Page ID Prefix
+			Thedbinfo.dbiAP = elem.GetAttribute("AccPageIDPrefix");
+
+			// Get the Accessory Page ID Template
+			string AccPageIDTplate = elem.GetAccPageIDTemplate();
+
+			// Get the list of available fields
+			ArrayList AvailList;
+			AvailList = ROdatabase.RODB_GetFields(elem, (uint) RecordType.Schema);
+
+			// Initialize a stack for the FieldsInUse lists
+			InUseListStack = new Stack();
+
+			//Initialize a stack for the return value template
+			RtnValTmplateStack = new Stack();
+
+			widestAcPgId = 0;
+			AllTypesUsed = 0;
+
+			// for each group..
+			// ... save to the FST file and get widestAcPgId
+			// .... also save a RECID/ACCPGID to a sorted list
+			// ... also save a RECID/FSToffset to a sorted list
+//			XmlNode  GroupNode = TheROtableNode;
+			StatusWin.BarMax = ROdatabase.RODB_GetNumberOfROValueRecords(tablename)+1;
+			StatusWin.BarStepValue = 1;
+			StatusWin.BarValue = 0;
+			StatusWin.StatMsg = "Saving To RO.FST File";
+//			Profiler.End("Startup");
+			RemoveGroupChildNodes(TheROtableNode);
+			Thedbinfo.dbiGL = SaveFstGroup(TheROtableNode,0,ref AllTypesUsed,AvailList,AccPageIDTplate);
+//			Profiler.Start("Finish");
+
+			Thedbinfo.dbiIL = (uint)fhFST.BaseStream.Position;
+
+			StatusWin.StatMsg = "Saving RO References";
+			StatusWin.BarMax = IdsAndOffsets.Count + IdsAndAccPgIds.Count;
+			StatusWin.BarStepValue = 1;
+			StatusWin.BarValue = 0;
+			// save the IdsAndOffsets list
+			for (int i=0; i<IdsAndOffsets.Count; i++)
+			{
+				uint buf1; 
+				uint buf2;
+				//				IDsAndOffsetMemBlock tbuf = new IDsAndOffsetMemBlock();
+				StatusWin.PerformStep();
+
+				buf1 = System.Convert.ToUInt32(IdsAndOffsets.GetKey(i));
+				//				buf1 = SwapBytes(buf1);
+				buf2 = System.Convert.ToUInt32(IdsAndOffsets.GetByIndex(i));
+				fhFST.Write(buf1);
+				fhFST.Write(buf2);
+				RtnVal = true;
+			}
+			IdsAndOffsets.Clear();
+
+			// write ACCPageIDs and offsets
+			Thedbinfo.dbiAL = (uint)fhFST.BaseStream.Position;
+			Thedbinfo.dbiAW = widestAcPgId;
+			// spin through the children nodes and look for AccPageIds
+			for (int i=0; i<IdsAndAccPgIds.Count; i++)
+			{
+				string ACCPageIDstr;
+				uint RecIDint;
+				StatusWin.PerformStep();
+				ACCPageIDstr = Convert.ToString(IdsAndAccPgIds.GetKey(i));
+				ACCPageIDstr = ACCPageIDstr.PadRight(widestAcPgId,(char)0);
+				RecIDint = Convert.ToUInt32(IdsAndAccPgIds.GetByIndex(i));
+				fhFST.Write(RecIDint);
+				WriteString(ACCPageIDstr,false);
+			}
+			IdsAndAccPgIds.Clear();
+			// Save the end offset for this database (table)
+			Thedbinfo.dbiEND = (uint)fhFST.BaseStream.Position;
+//			Profiler.End("Finish");
+			return RtnVal;
+		}
+
+		private uint SaveFstGroup(XmlNode GroupNode, uint parentID,ref ushort typ,ArrayList AvailList,string AccPageIDTplate)
+		{
+			uint RtnVal;
+			uint curRecID;
+			ushort curType = 0;
+			ushort numgroups;
+			uint elemParentID;
+			ArrayList FstTmp;
+			FstTmpSTRC tmpfststrc;
+			bool PopInUseStack = false;
+			bool PopRtnValStack = false;
+
+			// FstTmp is an array that stores record type, menu title,
+			// and offset into the FST file for each RO (non group) record
+			FstTmp = new ArrayList();
+			
+			VlnXmlElement elem;
+			elem = (VlnXmlElement) GroupNode;
+
+			// Get the current node's record id
+			string RecIdStr = elem.GetAttribute("RecID");
+			curRecID = System.Convert.ToUInt32(RecIdStr,16);
+
+			// Get the current node's parent id
+			string ParIdStr = elem.GetAttribute("ParentID");
+			elemParentID = Convert.ToUInt32(ParIdStr,16);
+
+			string HasKids = elem.GetAttribute("HasChild");
+			string KidsLoaded = elem.GetAttribute("ChildLoaded");
+
+			numgroups = 0;
+
+				if (KidsLoaded != "True" && HasKids.Equals("True"))
+				{
+//					Profiler.Start("GetChildData");
+//					ROdatabase.RODB_GetChildData(elem,true);
+					ROdatabase.RODB_GetGroupAndSubgroups(elem);
+//					Profiler.End("GetChildData");
+				}
+
+				XmlNode tmpnode = GroupNode;
+				XmlNode chldnode;
+				VlnXmlElement ChildElem;
+
+				// Process the children.  If the child is a subgroup,
+				// call this function (SaveFstGroup) again.  If the
+				// child is a RO record, save the RO information to
+				// the FST file.
+				chldnode = tmpnode.FirstChild;
+
+			if (chldnode != null)
+			{
+
+				string dummy = "";  // need for RODB_GetFIeldsInUse call, won't be used.
+				//				ArrayList AvailList, InUseList;
+				ArrayList InUseList;
+				//				ArrayList tmpAvailList;
+				string RtnValTmplate;
+
+				// if the current group has a "FieldInUse" list, go get it.
+				if (elem.HasAttribute("FieldsInUse") == true)
+				{
+//					Profiler.Start("GetFieldsInUse");
+					InUseList = ROdatabase.RODB_GetFieldsInUse(elem, AvailList,"FieldsInUse", ref dummy, false);
+					// save the InUseList on a stack for children to use if they don't have one of their own
+					InUseListStack.Push(InUseList);
+//					Profiler.End("GetFieldsInUse");
+					PopInUseStack = true;
+				}
+				else
+				{
+					// Use the InUseList from this group's parent
+					InUseList = (ArrayList)InUseListStack.Peek();
+					PopInUseStack = false;
+				}
+
+				// if the current group has a "RetVal", go get it
+				if (elem.HasAttribute("RetVal") == true)
+				{
+					RtnValTmplate = elem.GetReturnValueTemplate();
+					// save the RtnValTmplate on a stack for children to use if they don't have one
+					RtnValTmplateStack.Push(RtnValTmplate);
+					PopRtnValStack = true;
+				}
+				else
+				{
+					// use the parent's RtnValTmplate
+					RtnValTmplate = (string) RtnValTmplateStack.Peek();
+					PopRtnValStack = false;
+				}
+				while (chldnode != null)
+				{
+					uint curOffset =0;
+					bool SkipThisOne;
+
+					if (chldnode is VlnXmlElement)
+					{
+						SkipThisOne = false;
+						ChildElem = (VlnXmlElement) chldnode;
+						if (ChildElem.Name == "vlnGroup") // is a subgroup?
+						{
+							curType=0;
+							curOffset = SaveFstGroup(chldnode,curRecID,ref curType,AvailList,AccPageIDTplate); // process subgroup
+						}
+						else // save RO info.
+						{
+							int levelCnt = chldnode.ChildNodes.Count;
+							string TheMenuTitle = ChildElem.GetAttribute("MenuTitle");
+							if ((levelCnt >= 1) && !TheMenuTitle.Equals(""))
+							{
+								curOffset = (uint)fhFST.BaseStream.Position;
+								curType = SaveROToFST(chldnode,InUseList,RtnValTmplate,AccPageIDTplate);
+							}
+							else
+							{
+								SkipThisOne = true;
+							}
+						}
+						if (!SkipThisOne)
+						{
+							string tmpstr = ChildElem.GetAttribute("MenuTitle");
+							tmpfststrc = new FstTmpSTRC(curType,curOffset,tmpstr);
+							FstTmp.Add(tmpfststrc);
+							typ |= curType;
+							numgroups++;
+						}
+					} // end if VlnXmlElement
+				
+					// Get next child
+					chldnode = chldnode.NextSibling;
+				}// end while
+			} // if child is not null
+
+			// pop the InUseList stack
+			if (PopInUseStack)
+				InUseListStack.Pop();
+
+			// pop the return valuse template stack
+			if (PopRtnValStack)
+				RtnValTmplateStack.Pop();
+
+
+			// save the current position of the FST file for the return value
+			RtnVal = (uint)fhFST.BaseStream.Position;
+
+			// Save the ID and offset entry for the current ID
+			IdsAndOffsets.Add(curRecID,RtnVal);
+
+			fhFST.Write(curRecID);
+			fhFST.Write(elemParentID);
+			fhFST.Write(numgroups);
+
+			// write the FstTmp
+			for (int i=0; i < FstTmp.Count; i++)
+			{
+				tmpfststrc = (FstTmpSTRC)FstTmp[i];
+				tmpfststrc.Write(fhFST);
+			}
+			FstTmp.Clear();
+
+			return RtnVal;
+		}
+	
+
+		public void WriteGraphicsReturnValue(string OrigStr)
+		{
+			string text, tmptext, hgttxt, widtxt, imgdateStr;
+			int idx;
+			int hgt, wid;
+			int imgdateInt;
+			byte newline = 10;
+
+			char[] tmpbuf = OrigStr.ToCharArray();
+
+			// remove the trailing "\r\n"
+			tmptext = OrigStr.Substring(0,OrigStr.Length-2);
+
+			// parse out the image width
+			idx = tmptext.LastIndexOf("\r\n");
+			widtxt = tmptext.Substring(idx+2,tmptext.Length-(idx+2));
+			wid = Convert.ToInt32(widtxt,10);
+			widtxt = wid.ToString("x4");
+			tmptext = tmptext.Substring(0,idx);
+
+			// parse out the image height
+			idx = tmptext.LastIndexOf("\r\n");
+			hgttxt = tmptext.Substring(idx+2,tmptext.Length-(idx+2));
+			hgt = Convert.ToInt32(hgttxt,10);
+			hgttxt = hgt.ToString("x4");
+			tmptext = tmptext.Substring(0,idx);
+
+			// parse out the image file name and image date
+			idx = tmptext.IndexOf(" ");
+			text = tmptext.Substring(idx+1);
+			if (tmptext.StartsWith("\r\n"))
+				imgdateStr = tmptext.Substring(2,idx-2); // first 2 chars are "\r\n"
+			else
+			{
+				if(idx < 1)
+					imgdateStr=null;
+				else
+					imgdateStr = tmptext.Substring(0,idx);
+			}
+			if (imgdateStr == null|| imgdateStr=="")
+				imgdateInt = 0;
+			else
+				imgdateInt = Convert.ToInt32(imgdateStr,10);
+
+			 // write graphics file name
+			WriteString(text,false);
+			fhFST.Write(newline);
+
+			// write dummy date (old FST file had only zeros!
+//			WriteString("00000000",false);
+			WriteString(imgdateInt.ToString("x8"),false);
+			fhFST.Write(newline);
+
+			// write the image height
+			WriteString(hgttxt,false);
+			fhFST.Write(newline);
+
+			//write the image width
+			WriteString(widtxt,true);
+		}
+
+
+		private ushort SaveROToFST(XmlNode RONode,ArrayList InUseList,string RtnValTmplate, string AccPageIDTplate)
+		{
+			ushort RtnVal;
+			uint startFST = (uint)fhFST.BaseStream.Position;
+			uint RORecID;
+			uint ParID;
+			byte nullbyte=0;
+
+			VlnXmlElement elem;
+			elem = (VlnXmlElement) RONode;
+
+//			string dummy = "";  // need for RODB_GetFIeldsInUse call, won't be used.
+//			ArrayList AvailList, InUseList;
+//			//Get the "In Use" field list
+//			AvailList = ROdatabase.RODB_GetFields(elem, (uint) RecordType.Schema);
+//			InUseList = ROdatabase.RODB_GetFieldsInUse(elem, AvailList,"FieldsInUse", ref dummy);
+
+			//Write the RO's record ID
+			string RecIdStr = elem.GetAttribute("RecID");
+			RORecID = System.Convert.ToUInt16(RecIdStr,16);
+
+			fhFST.Write(RORecID);
+
+// **** Debug
+//			if (RecIdStr.Equals("000000a6"))
+//				nullbyte=0;
+// ***
+			// Get the Accessory Page ID
+//			string AccPageIDTplate = elem.GetAccPageIDTemplate();
+			string AccPageID = elem.GetAccPageIDString(AccPageIDTplate);
+
+// **** Debug
+//			if (AccPageID.Equals("S:1"))
+//				nullbyte=0;
+// *****
+
+			//Write the parent ID
+			string ParIDstr = elem.GetAttribute("ParentID");
+			ParID = System.Convert.ToUInt16(ParIDstr,16);
+			fhFST.Write(ParID);
+
+			// not sure why, was in old FST code but no comment!
+			// I assume that it's some sort of separater
+			short none = -1;
+			fhFST.Write(none);
+
+			//Get the RO Return value and return type
+//			string RtnValTmplate = elem.GetReturnValueTemplate();
+			RtnVal = 0;
+			string tablename = elem.GetAttribute("Table");
+//			if (RtnValTmplate.Equals("<Setpoint__Value>"))
+//			{
+//				int i;
+//				i =0;
+//			}
+			string cvttmp= CvtFldToUserFld(RtnValTmplate);
+			string RORtnVal = elem.GetReturnValue(ROdatabase,tablename,cvttmp,InUseList,ref RtnVal);
+
+			// Write the field type to the FST
+			fhFST.Write(RtnVal);
+
+			if (RtnVal == 8) // is this an Image (graphics) record?
+				WriteGraphicsReturnValue(RORtnVal);
+			else
+				WriteString(RORtnVal);
+
+			// Write the Accessory Page ID
+			// Fix for Bug B2003-039. Added check for a NULL AccPageID
+			// If is null, then assign a blank string
+
+			if (AccPageID != null)
+				AccPageID = AccPageID.Trim();
+			else
+				AccPageID = " ";
+			WriteString(AccPageID);
+
+			// Save the ID and offset entry for the current ID
+			IdsAndOffsets.Add(RORecID,startFST);
+
+			// Save the RecID and Accessory Page id
+			IdsAndAccPgIds[AccPageID] = RORecID;
+			
+
+			// Save the widest AccPageID width
+			int acclen = AccPageID.Length;
+			if (acclen > widestAcPgId)
+				widestAcPgId = (ushort)acclen;
+//			if(dtLast.AddSeconds(.3) < DateTime.Now)
+//			{
+				StatusWin.StatMsg = AccPageID;
+				StatusWin.PerformStep();
+//				dtLast=DateTime.Now;
+//			}
+			return RtnVal;
+		}
+
+		public void WriteString(string str)
+		{
+			WriteString(str,true);
+		}
+
+		public void WriteString(string str,bool AddNull)
+		{
+			int n=str.Length;
+			if (AddNull) 
+				n++;
+			byte [] b = new byte[n];
+			for(int i =0; i < str.Length; i++)
+			{
+				b[i] = (byte)str[i];
+			}
+			fhFST.Write(b,0,n);
+		}
+
+	}
+}

PROMS/ReferencedObjectsOld/Exe/RefObj/ROEditor/app.config

@@ -0,0 +1,12 @@
+<?xml version="1.0"?>
+<configuration>
+	<startup>
+	</startup><runtime>
+		<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1" appliesTo="v1.0.3705">
+		</assemblyBinding></runtime>
+	<appSettings>
+		<!--   User application and configured property settings go here.-->
+		<!--   Example: <add key="settingName" value="settingValue"/> -->
+		<add key="AboutDlg.AutoScale" value="True"/>
+	</appSettings>
+</configuration>

PROMS/ReferencedObjectsOld/LibSource/DBEncapsulation/AssemblyInfo.cs

@@ -0,0 +1,55 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//

PROMS/ReferencedObjectsOld/LibSource/DBEncapsulation/AssemblyInfo.cs.bak

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("E:\\proms.net\\Public Key\\vlnkey.snk")]
+[assembly: AssemblyKeyName("")]

PROMS/ReferencedObjectsOld/LibSource/DBEncapsulation/DBEncap.cs

@@ -0,0 +1,205 @@
+/*********************************************************************************************
+ * Copyright 2002 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: DBEncap.cs $     $Revision: 5 $
+ * $Author: Kathy $   $Date: 12/10/02 2:24p $
+ *
+ * $History: DBEncap.cs $
+ * 
+ * *****************  Version 5  *****************
+ * User: Kathy        Date: 12/10/02   Time: 2:24p
+ * Updated in $/LibSource/DBEncapsulation
+ * handle dbnull for sql server
+ * 
+ * *****************  Version 4  *****************
+ * User: Kathy        Date: 10/09/02   Time: 12:36p
+ * Updated in $/LibSource/DBEncapsulation
+ * handle null in data
+ * 
+ * *****************  Version 3  *****************
+ * User: Jsj          Date: 9/05/02    Time: 1:03p
+ * Updated in $/LibSource/DBEncapsulation
+ * added ExecuteNonQuery calls
+ * 
+ * *****************  Version 2  *****************
+ * User: Jsj          Date: 9/05/02    Time: 11:31a
+ * Updated in $/LibSource/DBEncapsulation
+ * added Close functions
+ * 
+ * *****************  Version 1  *****************
+ * User: Jsj          Date: 8/23/02    Time: 3:07p
+ * Created in $/LibSource/DBEncapsulation
+ *********************************************************************************************/
+
+using System;
+using System.Data;
+using System.Data.OleDb;
+using Microsoft.Data.Odbc;
+
+namespace DBEncapsulation
+{
+	/// <summary>
+	/// Summary description for DBEncapsulate: Encapsulate database interface methods &
+	/// classes. Will encapsulate OLE DB & ODBC connections, commands, readers & other
+	/// features as required.
+	/// </summary>
+	public class DBEncapsulate
+	{
+		public virtual void Connection(string strconnect)
+		{
+		}
+		public virtual void OpenConnection()
+		{
+		}
+		public virtual void CloseConnection()
+		{
+		}
+		public virtual void Command(string strCommand)
+		{
+		}
+		public virtual void CommandDispose()
+		{
+		}
+		public virtual bool Reader()
+		{
+			return false;
+		}
+		public virtual void ReaderClose()
+		{
+		}
+		public virtual bool Read()
+		{
+			return false;
+		}
+		public virtual string GetString(int num)
+		{
+			string tmp = "tmp";
+			return (tmp);
+		}
+		public virtual int GetInt32(int num)
+		{
+			return (0);
+		}
+		public virtual void NonQuery()
+		{
+		}
+	}
+	public class OLEDB_DBEncap: DBEncapsulate
+	{
+		OleDbConnection myDatabaseConn;
+		OleDbCommand myCommand;
+		OleDbDataReader myReader;
+		public override void Connection(string strconnect)
+		{
+			myDatabaseConn = new OleDbConnection(strconnect);
+		}
+		public override void OpenConnection()
+		{
+			myDatabaseConn.Open();
+		}
+		public override void CloseConnection()
+		{
+			myDatabaseConn.Close();
+		}
+		public override void Command(string strCommand)
+		{
+			myCommand = new OleDbCommand(strCommand,myDatabaseConn);
+		}
+		public override void CommandDispose()
+		{
+			myCommand.Dispose();
+		}
+		public override bool Reader()
+		{
+			myReader = myCommand.ExecuteReader();
+			if (myReader == null)
+				return false;
+			else
+				return true;
+		}
+		public override void ReaderClose()
+		{
+			myReader.Close();
+		}
+		public override bool Read()
+		{
+			return(myReader.Read());
+		}
+		public override string GetString(int num)
+		{
+			if (myReader.IsDBNull(num) == false)
+				return(myReader.GetString(num));
+			else
+				 return null;
+			//if (myReader.GetString(num) == null) return null;
+			//return(myReader.GetString(num));
+		}
+		public override int GetInt32(int num)
+		{
+			return(myReader.GetInt32(num));
+		}
+		public override void NonQuery()
+		{
+			myCommand.ExecuteNonQuery();
+		}
+	}
+
+	public class ODBC_DBEncap: DBEncapsulate
+	{
+		OdbcConnection myDatabaseConn;
+		OdbcCommand myCommand;
+		OdbcDataReader myReader;
+		public override void Connection(string strconnect)
+		{
+			myDatabaseConn = new OdbcConnection(strconnect);
+		}
+		public override void OpenConnection()
+		{
+			myDatabaseConn.Open();
+		}
+		public override void CloseConnection()
+		{
+			myDatabaseConn.Close();
+		}
+		public override void Command(string strCommand)
+		{
+			myCommand = new OdbcCommand(strCommand,myDatabaseConn);
+		}
+		public override void CommandDispose()
+		{
+			myCommand.Dispose();
+		}
+		public override bool Reader()
+		{
+			myReader = myCommand.ExecuteReader();
+			if (myReader == null) 
+				return false;
+			else
+				return true;
+		}
+		public override void ReaderClose()
+		{
+			myReader.Close();
+		}
+		public override bool Read()
+		{
+			return(myReader.Read());
+		}
+		public override string GetString(int num)
+		{
+			if (myReader.IsDBNull(num) == false)
+				return(myReader.GetString(num));
+			else
+				return null;
+		}
+		public override int GetInt32(int num)
+		{
+			return(myReader.GetInt32(num));
+		}
+		public override void NonQuery()
+		{
+			myCommand.ExecuteNonQuery();
+		}
+	}
+}

PROMS/ReferencedObjectsOld/LibSource/DBEncapsulation/DBEncapsulation.csproj

@@ -0,0 +1,106 @@
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup>
+    <ProjectType>Local</ProjectType>
+    <ProductVersion>8.0.50727</ProductVersion>
+    <SchemaVersion>2.0</SchemaVersion>
+    <ProjectGuid>{6D44F537-879E-11D6-84B8-00A0CC271352}</ProjectGuid>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ApplicationIcon>
+    </ApplicationIcon>
+    <AssemblyKeyContainerName>
+    </AssemblyKeyContainerName>
+    <AssemblyName>DBEncapsulation</AssemblyName>
+    <AssemblyOriginatorKeyFile>
+    </AssemblyOriginatorKeyFile>
+    <DefaultClientScript>JScript</DefaultClientScript>
+    <DefaultHTMLPageLayout>Grid</DefaultHTMLPageLayout>
+    <DefaultTargetSchema>IE50</DefaultTargetSchema>
+    <DelaySign>false</DelaySign>
+    <OutputType>Library</OutputType>
+    <RootNamespace>DBEncapsulation</RootNamespace>
+    <RunPostBuildEvent>OnBuildSuccess</RunPostBuildEvent>
+    <StartupObject>
+    </StartupObject>
+    <FileUpgradeFlags>
+    </FileUpgradeFlags>
+    <UpgradeBackupLocation>
+    </UpgradeBackupLocation>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <OutputPath>bin\Debug\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>true</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <NoStdLib>false</NoStdLib>
+    <NoWarn>
+    </NoWarn>
+    <Optimize>false</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>full</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <OutputPath>bin\Release\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>TRACE</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>false</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <NoStdLib>false</NoStdLib>
+    <NoWarn>
+    </NoWarn>
+    <Optimize>true</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>none</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="Microsoft.Data.Odbc">
+      <Name>Microsoft.Data.Odbc</Name>
+      <HintPath>C:\Program Files\Microsoft.Net\Odbc.Net\Microsoft.Data.Odbc.dll</HintPath>
+    </Reference>
+    <Reference Include="System">
+      <Name>System</Name>
+    </Reference>
+    <Reference Include="System.Data">
+      <Name>System.Data</Name>
+    </Reference>
+    <Reference Include="System.Xml">
+      <Name>System.XML</Name>
+    </Reference>
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="AssemblyInfo.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="DBEncap.cs">
+      <SubType>Code</SubType>
+    </Compile>
+  </ItemGroup>
+  <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
+  <PropertyGroup>
+    <PreBuildEvent>
+    </PreBuildEvent>
+    <PostBuildEvent>
+    </PostBuildEvent>
+  </PropertyGroup>
+</Project>

PROMS/ReferencedObjectsOld/LibSource/DBEncapsulation/DBEncapsulation.sln

@@ -0,0 +1,21 @@
+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DBEncapsulation", "DBEncapsulation.csproj", "{6D44F537-879E-11D6-84B8-00A0CC271352}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		Debug = Debug
+		Release = Release
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Debug.ActiveCfg = Debug|.NET
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Debug.Build.0 = Debug|.NET
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Release.ActiveCfg = Release|.NET
+		{6D44F537-879E-11D6-84B8-00A0CC271352}.Release.Build.0 = Release|.NET
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

PROMS/ReferencedObjectsOld/LibSource/IniFileIO/AssemblyInfo.cpp

@@ -0,0 +1,58 @@
+#include "stdafx.h"
+
+using namespace System::Reflection;
+using namespace System::Runtime::CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly:AssemblyTitleAttribute("")];
+[assembly:AssemblyDescriptionAttribute("")];
+[assembly:AssemblyConfigurationAttribute("")];
+[assembly:AssemblyCompanyAttribute("")];
+[assembly:AssemblyProductAttribute("")];
+[assembly:AssemblyCopyrightAttribute("")];
+[assembly:AssemblyTrademarkAttribute("")];
+[assembly:AssemblyCultureAttribute("")];		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the value or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly:AssemblyVersionAttribute("1.1.*")];
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//        When specifying the KeyFile, the location of the KeyFile should be
+//        relative to the project directory.
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly:AssemblyDelaySignAttribute(false)];
+[assembly:AssemblyKeyFileAttribute("E:\\proms.net\\Public Key\\vlnkey.snk")];
+[assembly:AssemblyKeyNameAttribute("")];
+

PROMS/ReferencedObjectsOld/LibSource/IniFileIO/IniFileIO.cpp

@@ -0,0 +1,67 @@
+/*********************************************************************************************
+ * Copyright 2003 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: IniFileIO.cpp $     $Revision: 4 $
+ * $Author: Jsj $   $Date: 1/07/04 12:08p $
+ *
+ * $History: IniFileIO.cpp $
+ * 
+ * *****************  Version 4  *****************
+ * User: Jsj          Date: 1/07/04    Time: 12:08p
+ * Updated in $/LibSource/IniFileIO
+ * was not returning found strings
+ * 
+ * *****************  Version 3  *****************
+ * User: Jsj          Date: 12/16/03   Time: 11:44a
+ * Updated in $/LibSource/IniFileIO
+ * modified to all use in .net 1.0 and .net 1.1
+ *********************************************************************************************/
+// This is the main DLL file.
+#include "stdafx.h"
+#include "IniFileIO.h"
+
+using namespace IniFileIO;
+
+String *INIFile::GetINIKeyValueStr(String *SectName, String *KeyName, String *DefaultValue, unsigned BufSize, String *IniFileName)
+{
+	unsigned rtval;
+	LPCTSTR tmpSectName;
+	LPCTSTR tmpKeyName;
+	LPCTSTR tmpDefaultValue;
+	LPSTR tmpReturnBuff;
+	LPCTSTR tmpIniFileName;
+	ValueString = new String(NULL,BufSize+1);
+	tmpSectName = static_cast<LPCTSTR>(static_cast<void*>(Marshal::StringToCoTaskMemAnsi(SectName)));
+	tmpKeyName = static_cast<LPCTSTR>(static_cast<void*>(Marshal::StringToCoTaskMemAnsi(KeyName)));
+	tmpDefaultValue = static_cast<LPCTSTR>(static_cast<void*>(Marshal::StringToCoTaskMemAnsi(DefaultValue)));
+	tmpReturnBuff = static_cast<LPSTR>(static_cast<void*>(Marshal::StringToCoTaskMemAnsi(ValueString)));
+	tmpIniFileName = static_cast<LPCTSTR>(static_cast<void*>(Marshal::StringToCoTaskMemAnsi(IniFileName)));
+
+	rtval = GetPrivateProfileString(tmpSectName,tmpKeyName,tmpDefaultValue,tmpReturnBuff,BufSize,tmpIniFileName);
+	ValueString = new String(tmpReturnBuff);
+	return ValueString;
+
+}
+
+bool INIFile::WriteINIKeyValueStr(String *SectName, String *KeyName, String *KeyValue, String *IniFileName)
+{
+	bool rtval;
+
+	LPCTSTR tmpSectName;
+	LPCTSTR tmpKeyName;
+	LPCTSTR tmpKeyValue;
+	LPCTSTR tmpIniFileName;
+	tmpSectName = static_cast<LPCTSTR>(static_cast<void*>(Marshal::StringToCoTaskMemAnsi(SectName)));
+	tmpKeyName = static_cast<LPCTSTR>(static_cast<void*>(Marshal::StringToCoTaskMemAnsi(KeyName)));
+	tmpKeyValue = static_cast<LPCTSTR>(static_cast<void*>(Marshal::StringToCoTaskMemAnsi(KeyValue)));
+	tmpIniFileName = static_cast<LPCTSTR>(static_cast<void*>(Marshal::StringToCoTaskMemAnsi(IniFileName)));
+
+	rtval = WritePrivateProfileString(tmpSectName,tmpKeyName,tmpKeyValue,tmpIniFileName);
+	
+	Marshal::FreeCoTaskMem(System::IntPtr((void*)tmpSectName));
+	Marshal::FreeCoTaskMem(System::IntPtr((void*)tmpKeyName));
+	Marshal::FreeCoTaskMem(System::IntPtr((void*)tmpKeyValue));
+	Marshal::FreeCoTaskMem(System::IntPtr((void*)tmpIniFileName));
+	return rtval;
+}

PROMS/ReferencedObjectsOld/LibSource/IniFileIO/IniFileIO.h

@@ -0,0 +1,35 @@
+/*********************************************************************************************
+ * Copyright 2003 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: IniFileIO.h $     $Revision: 3 $
+ * $Author: Jsj $   $Date: 12/16/03 11:39a $
+ *
+ * $History: IniFileIO.h $
+ * 
+ * *****************  Version 3  *****************
+ * User: Jsj          Date: 12/16/03   Time: 11:39a
+ * Updated in $/LibSource/IniFileIO
+ * modified to all use in .net 1.0 and .net 1.1
+ *********************************************************************************************/
+// IniFileIO.h
+
+#pragma once
+#using <mscorlib.dll>
+#include <Windows.h>
+#include <atlstr.h>
+
+using namespace System;
+using namespace System::Runtime::InteropServices;
+
+namespace IniFileIO
+{
+	public __gc class INIFile
+	{
+	public:
+		String *ValueString;
+		INIFile() {};
+		String *GetINIKeyValueStr(String *SectName, String *KeyName, String *DefaultValue, unsigned BufSize, String *IniFileName);
+		bool WriteINIKeyValueStr(String *SectName, String *KeyName, String *KeyValue, String *IniFileName);
+	};
+}

PROMS/ReferencedObjectsOld/LibSource/IniFileIO/IniFileIO.sln

@@ -0,0 +1,21 @@
+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "IniFileIO", "IniFileIO.vcproj", "{FD05F903-0D2F-11D7-859A-D0745C000000}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		Debug = Debug
+		Release = Release
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{FD05F903-0D2F-11D7-859A-D0745C000000}.Debug.ActiveCfg = Debug|Win32
+		{FD05F903-0D2F-11D7-859A-D0745C000000}.Debug.Build.0 = Debug|Win32
+		{FD05F903-0D2F-11D7-859A-D0745C000000}.Release.ActiveCfg = Release|Win32
+		{FD05F903-0D2F-11D7-859A-D0745C000000}.Release.Build.0 = Release|Win32
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

PROMS/ReferencedObjectsOld/LibSource/IniFileIO/IniFileIO.vcproj

@@ -0,0 +1,238 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="8.00"
+	Name="IniFileIO"
+	ProjectGUID="{FD05F903-0D2F-11D7-859A-D0745C000000}"
+	Keyword="ManagedCProj"
+	>
+	<Platforms>
+		<Platform
+			Name="Win32"
+		/>
+	</Platforms>
+	<ToolFiles>
+	</ToolFiles>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="e:\ve-proms.net\bin"
+			IntermediateDirectory="Debug"
+			ConfigurationType="2"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			ManagedExtensions="4"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				AdditionalOptions="/clr:initialAppDomain"
+				Optimization="0"
+				PreprocessorDefinitions="WIN32;_DEBUG"
+				MinimalRebuild="false"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="true"
+				DefaultCharIsUnsigned="false"
+				TreatWChar_tAsBuiltInType="false"
+				RuntimeTypeInfo="false"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalOptions="/NOENTRY"
+				OutputFile="$(OutDir)/IniFileIO.dll"
+				LinkIncremental="2"
+				ForceSymbolReferences="__DllMainCRTStartup@12"
+				GenerateDebugInformation="true"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="E:\Ve-proms.net\BIN"
+			IntermediateDirectory="Release"
+			ConfigurationType="2"
+			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC71.vsprops"
+			CharacterSet="2"
+			ManagedExtensions="4"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				AdditionalOptions="/clr:initialAppDomain"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				PreprocessorDefinitions="WIN32;NDEBUG"
+				MinimalRebuild="false"
+				UsePrecompiledHeader="2"
+				WarningLevel="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalOptions="/NOENTRY"
+				OutputFile="$(OutDir)/IniFileIO.dll"
+				LinkIncremental="1"
+				ForceSymbolReferences="__DllMainCRTStartup@12"
+				GenerateDebugInformation="false"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+			>
+			<File
+				RelativePath="AssemblyInfo.cpp"
+				>
+			</File>
+			<File
+				RelativePath="IniFileIO.cpp"
+				>
+			</File>
+			<File
+				RelativePath="Stdafx.cpp"
+				>
+				<FileConfiguration
+					Name="Debug|Win32"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+						UsePrecompiledHeader="1"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Release|Win32"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+						UsePrecompiledHeader="1"
+					/>
+				</FileConfiguration>
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc"
+			>
+			<File
+				RelativePath="IniFileIO.h"
+				>
+			</File>
+			<File
+				RelativePath="Stdafx.h"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;r"
+			>
+		</Filter>
+		<File
+			RelativePath="ReadMe.txt"
+			>
+		</File>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

PROMS/ReferencedObjectsOld/LibSource/IniFileIO/ReadMe.txt

@@ -0,0 +1,31 @@
+========================================================================
+    DYNAMIC LINK LIBRARY : IniFileIO Project Overview
+========================================================================
+
+AppWizard has created this IniFileIO DLL for you.  
+
+This file contains a summary of what you will find in each of the files that
+make up your IniFileIO application.
+
+IniFileIO.vcproj
+    This is the main project file for VC++ projects generated using an Application Wizard. 
+    It contains information about the version of Visual C++ that generated the file, and 
+    information about the platforms, configurations, and project features selected with the
+    Application Wizard.
+
+IniFileIO.cpp
+    This is the main DLL source file.
+
+IniFileIO.h
+    This file contains a class declaration.
+
+AssemblyInfo.cpp
+	Contains custom attributes for modifying assembly metadata.
+
+/////////////////////////////////////////////////////////////////////////////
+Other notes:
+
+AppWizard uses "TODO:" to indicate parts of the source code you
+should add to or customize.
+
+/////////////////////////////////////////////////////////////////////////////

PROMS/ReferencedObjectsOld/LibSource/IniFileIO/Stdafx.cpp

@@ -0,0 +1,5 @@
+// stdafx.cpp : source file that includes just the standard includes
+// IniFileIO.pch will be the pre-compiled header
+// stdafx.obj will contain the pre-compiled type information
+
+#include "stdafx.h"

PROMS/ReferencedObjectsOld/LibSource/IniFileIO/Stdafx.h

@@ -0,0 +1,8 @@
+// stdafx.h : include file for standard system include files,
+// or project specific include files that are used frequently,
+// but are changed infrequently
+
+#pragma once
+
+#using <mscorlib.dll>
+

PROMS/ReferencedObjectsOld/LibSource/Org.Mentalis.Files/IniReader.cs

@@ -0,0 +1,428 @@
+/*
+    IniReader class for C#
+		Version: 1.0		Date: 2002/04/24
+*/
+/*
+    Copyright <20> 2002, The KPD-Team
+    All rights reserved.
+    http://www.mentalis.org/
+
+  Redistribution and use in source and binary forms, with or without
+  modification, are permitted provided that the following conditions
+  are met:
+
+    - Redistributions of source code must retain the above copyright
+       notice, this list of conditions and the following disclaimer. 
+
+    - Neither the name of the KPD-Team, nor the names of its contributors
+       may be used to endorse or promote products derived from this
+       software without specific prior written permission. 
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+  THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+  INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+  (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+  OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+using System;
+using System.Text;
+using System.Collections;
+using System.Runtime.InteropServices;
+
+// The Org.Mentalis.Files contains a number of classes that read from or write to special files.
+namespace Org.Mentalis.Files
+{
+	/// <summary>
+	/// The INIReader class can read keys from and write keys to an INI file.
+	/// </summary>
+	/// <remarks>
+	/// This class uses several Win32 API functions to read from and write to INI files. It will not work on Linux or FreeBSD.
+	/// </remarks>
+	public class IniReader
+	{
+		// API declarations
+		/// <summary>
+		/// The GetPrivateProfileInt function retrieves an integer associated with a key in the specified section of an initialization file.
+		/// </summary>
+		/// <param name="lpApplicationName">Pointer to a null-terminated string specifying the name of the section in the initialization file.</param>
+		/// <param name="lpKeyName">Pointer to the null-terminated string specifying the name of the key whose value is to be retrieved. This value is in the form of a string; the GetPrivateProfileInt function converts the string into an integer and returns the integer.</param>
+		/// <param name="nDefault">Specifies the default value to return if the key name cannot be found in the initialization file.</param>
+		/// <param name="lpFileName">Pointer to a null-terminated string that specifies the name of the initialization file. If this parameter does not contain a full path to the file, the system searches for the file in the Windows directory.</param>
+		/// <returns>The return value is the integer equivalent of the string following the specified key name in the specified initialization file. If the key is not found, the return value is the specified default value. If the value of the key is less than zero, the return value is zero.</returns>
+		[DllImport("KERNEL32.DLL", EntryPoint = "GetPrivateProfileIntA", CharSet = CharSet.Ansi)]
+		private static extern int GetPrivateProfileInt(string lpApplicationName, string lpKeyName, int nDefault, string lpFileName);
+		/// <summary>
+		/// The WritePrivateProfileString function copies a string into the specified section of an initialization file.
+		/// </summary>
+		/// <param name="lpApplicationName">Pointer to a null-terminated string containing the name of the section to which the string will be copied. If the section does not exist, it is created. The name of the section is case-independent; the string can be any combination of uppercase and lowercase letters.</param>
+		/// <param name="lpKeyName">Pointer to the null-terminated string containing the name of the key to be associated with a string. If the key does not exist in the specified section, it is created. If this parameter is NULL, the entire section, including all entries within the section, is deleted.</param>
+		/// <param name="lpString">Pointer to a null-terminated string to be written to the file. If this parameter is NULL, the key pointed to by the lpKeyName parameter is deleted.</param>
+		/// <param name="lpFileName">Pointer to a null-terminated string that specifies the name of the initialization file.</param>
+		/// <returns>If the function successfully copies the string to the initialization file, the return value is nonzero; if the function fails, or if it flushes the cached version of the most recently accessed initialization file, the return value is zero.</returns>
+		[DllImport("KERNEL32.DLL", EntryPoint = "WritePrivateProfileStringA", CharSet = CharSet.Ansi)]
+		private static extern int WritePrivateProfileString(string lpApplicationName, string lpKeyName, string lpString, string lpFileName);
+		/// <summary>
+		/// The GetPrivateProfileString function retrieves a string from the specified section in an initialization file.
+		/// </summary>
+		/// <param name="lpApplicationName">Pointer to a null-terminated string that specifies the name of the section containing the key name. If this parameter is NULL, the GetPrivateProfileString function copies all section names in the file to the supplied buffer.</param>
+		/// <param name="lpKeyName">Pointer to the null-terminated string specifying the name of the key whose associated string is to be retrieved. If this parameter is NULL, all key names in the section specified by the lpAppName parameter are copied to the buffer specified by the lpReturnedString parameter.</param>
+		/// <param name="lpDefault">Pointer to a null-terminated default string. If the lpKeyName key cannot be found in the initialization file, GetPrivateProfileString copies the default string to the lpReturnedString buffer. This parameter cannot be NULL. <br>Avoid specifying a default string with trailing blank characters. The function inserts a null character in the lpReturnedString buffer to strip any trailing blanks.</br></param>
+		/// <param name="lpReturnedString">Pointer to the buffer that receives the retrieved string.</param>
+		/// <param name="nSize">Specifies the size, in TCHARs, of the buffer pointed to by the lpReturnedString parameter.</param>
+		/// <param name="lpFileName">Pointer to a null-terminated string that specifies the name of the initialization file. If this parameter does not contain a full path to the file, the system searches for the file in the Windows directory.</param>
+		/// <returns>The return value is the number of characters copied to the buffer, not including the terminating null character.</returns>
+		[DllImport("KERNEL32.DLL", EntryPoint = "GetPrivateProfileStringA", CharSet = CharSet.Ansi)]
+		private static extern int GetPrivateProfileString(string lpApplicationName, string lpKeyName, string lpDefault, StringBuilder lpReturnedString, int nSize, string lpFileName);
+		/// <summary>
+		/// The GetPrivateProfileSectionNames function retrieves the names of all sections in an initialization file.
+		/// </summary>
+		/// <param name="lpszReturnBuffer">Pointer to a buffer that receives the section names associated with the named file. The buffer is filled with one or more null-terminated strings; the last string is followed by a second null character.</param>
+		/// <param name="nSize">Specifies the size, in TCHARs, of the buffer pointed to by the lpszReturnBuffer parameter.</param>
+		/// <param name="lpFileName">Pointer to a null-terminated string that specifies the name of the initialization file. If this parameter is NULL, the function searches the Win.ini file. If this parameter does not contain a full path to the file, the system searches for the file in the Windows directory.</param>
+		/// <returns>The return value specifies the number of characters copied to the specified buffer, not including the terminating null character. If the buffer is not large enough to contain all the section names associated with the specified initialization file, the return value is equal to the length specified by nSize minus two.</returns>
+		[DllImport("KERNEL32.DLL", EntryPoint = "GetPrivateProfileSectionNamesA", CharSet = CharSet.Ansi)]
+		private static extern int GetPrivateProfileSectionNames(byte[] lpszReturnBuffer, int nSize, string lpFileName);
+		/// <summary>
+		/// The WritePrivateProfileSection function replaces the keys and values for the specified section in an initialization file.
+		/// </summary>
+		/// <param name="lpAppName">Pointer to a null-terminated string specifying the name of the section in which data is written. This section name is typically the name of the calling application.</param>
+		/// <param name="lpString">Pointer to a buffer containing the new key names and associated values that are to be written to the named section.</param>
+		/// <param name="lpFileName">Pointer to a null-terminated string containing the name of the initialization file. If this parameter does not contain a full path for the file, the function searches the Windows directory for the file. If the file does not exist and lpFileName does not contain a full path, the function creates the file in the Windows directory. The function does not create a file if lpFileName contains the full path and file name of a file that does not exist.</param>
+		/// <returns>If the function succeeds, the return value is nonzero.<br>If the function fails, the return value is zero.</br></returns>
+		[DllImport("KERNEL32.DLL", EntryPoint = "WritePrivateProfileSectionA", CharSet = CharSet.Ansi)]
+		private static extern int WritePrivateProfileSection(string lpAppName, string lpString, string lpFileName);
+		/// <summary>Constructs a new IniReader instance.</summary>
+		/// <param name="file">Specifies the full path to the INI file (the file doesn't have to exist).</param>
+		public IniReader(string file)
+		{
+			Filename = file;
+		}
+		/// <summary>Gets or sets the full path to the INI file.</summary>
+		/// <value>A String representing the full path to the INI file.</value>
+		public string Filename
+		{
+			get
+			{
+				return m_Filename;
+			}
+			set
+			{
+				m_Filename = value;
+			}
+		}
+		/// <summary>Gets or sets the section you're working in. (aka 'the active section')</summary>
+		/// <value>A String representing the section you're working in.</value>
+		public string Section
+		{
+			get
+			{
+				return m_Section;
+			}
+			set
+			{
+				m_Section = value;
+			}
+		}
+		/// <summary>Reads an Integer from the specified key of the specified section.</summary>
+		/// <param name="section">The section to search in.</param>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <param name="defVal">The value to return if the specified key isn't found.</param>
+		/// <returns>Returns the value of the specified section/key pair, or returns the default value if the specified section/key pair isn't found in the INI file.</returns>
+		public int ReadInteger(string section, string key, int defVal)
+		{
+			return GetPrivateProfileInt(section, key, defVal, Filename);
+		}
+		/// <summary>Reads an Integer from the specified key of the specified section.</summary>
+		/// <param name="section">The section to search in.</param>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <returns>Returns the value of the specified section/key pair, or returns 0 if the specified section/key pair isn't found in the INI file.</returns>
+		public int ReadInteger(string section, string key)
+		{
+			return ReadInteger(section, key, 0);
+		}
+		/// <summary>Reads an Integer from the specified key of the active section.</summary>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <param name="defVal">The section to search in.</param>
+		/// <returns>Returns the value of the specified Key, or returns the default value if the specified Key isn't found in the active section of the INI file.</returns>
+		public int ReadInteger(string key, int defVal)
+		{
+			return ReadInteger(Section, key, defVal);
+		}
+		/// <summary>Reads an Integer from the specified key of the active section.</summary>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <returns>Returns the value of the specified key, or returns 0 if the specified key isn't found in the active section of the INI file.</returns>
+		public int ReadInteger(string key)
+		{
+			return ReadInteger(key, 0);
+		}
+		/// <summary>Reads a String from the specified key of the specified section.</summary>
+		/// <param name="section">The section to search in.</param>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <param name="defVal">The value to return if the specified key isn't found.</param>
+		/// <returns>Returns the value of the specified section/key pair, or returns the default value if the specified section/key pair isn't found in the INI file.</returns>
+		public string ReadString(string section, string key, string defVal)
+		{
+			StringBuilder sb = new StringBuilder(MAX_ENTRY);
+			int Ret = GetPrivateProfileString(section, key, defVal, sb, MAX_ENTRY, Filename);
+			return sb.ToString();
+		}
+		/// <summary>Reads a String from the specified key of the specified section.</summary>
+		/// <param name="section">The section to search in.</param>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <returns>Returns the value of the specified section/key pair, or returns an empty String if the specified section/key pair isn't found in the INI file.</returns>
+		public string ReadString(string section, string key)
+		{
+			return ReadString(section, key, "");
+		}
+		/// <summary>Reads a String from the specified key of the active section.</summary>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <returns>Returns the value of the specified key, or returns an empty String if the specified key isn't found in the active section of the INI file.</returns>
+		public string ReadString(string key)
+		{
+			return ReadString(Section, key);
+		}
+		/// <summary>Reads a Long from the specified key of the specified section.</summary>
+		/// <param name="section">The section to search in.</param>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <param name="defVal">The value to return if the specified key isn't found.</param>
+		/// <returns>Returns the value of the specified section/key pair, or returns the default value if the specified section/key pair isn't found in the INI file.</returns>
+		public long ReadLong(string section, string key, long defVal)
+		{
+			return long.Parse(ReadString(section, key, defVal.ToString()));
+		}
+		/// <summary>Reads a Long from the specified key of the specified section.</summary>
+		/// <param name="section">The section to search in.</param>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <returns>Returns the value of the specified section/key pair, or returns 0 if the specified section/key pair isn't found in the INI file.</returns>
+		public long ReadLong(string section, string key)
+		{
+			return ReadLong(section, key, 0);
+		}
+		/// <summary>Reads a Long from the specified key of the active section.</summary>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <param name="defVal">The section to search in.</param>
+		/// <returns>Returns the value of the specified key, or returns the default value if the specified key isn't found in the active section of the INI file.</returns>
+		public long ReadLong(string key, long defVal)
+		{
+			return ReadLong(Section, key, defVal);
+		}
+		/// <summary>Reads a Long from the specified key of the active section.</summary>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <returns>Returns the value of the specified Key, or returns 0 if the specified Key isn't found in the active section of the INI file.</returns>
+		public long ReadLong(string key)
+		{
+			return ReadLong(key, 0);
+		}
+		/// <summary>Reads a Byte array from the specified key of the specified section.</summary>
+		/// <param name="section">The section to search in.</param>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <returns>Returns the value of the specified section/key pair, or returns null (Nothing in VB.NET) if the specified section/key pair isn't found in the INI file.</returns>
+		public byte[] ReadByteArray(string section, string key)
+		{
+			try
+			{
+				return Convert.FromBase64String(ReadString(section, key));
+			}
+			catch { }
+			return null;
+		}
+		/// <summary>Reads a Byte array from the specified key of the active section.</summary>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <returns>Returns the value of the specified key, or returns null (Nothing in VB.NET) if the specified key pair isn't found in the active section of the INI file.</returns>
+		public byte[] ReadByteArray(string key)
+		{
+			return ReadByteArray(Section, key);
+		}
+		/// <summary>Reads a Boolean from the specified key of the specified section.</summary>
+		/// <param name="section">The section to search in.</param>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <param name="defVal">The value to return if the specified key isn't found.</param>
+		/// <returns>Returns the value of the specified section/key pair, or returns the default value if the specified section/key pair isn't found in the INI file.</returns>
+		public bool ReadBoolean(string section, string key, bool defVal)
+		{
+			return Boolean.Parse(ReadString(section, key, defVal.ToString()));
+		}
+		/// <summary>Reads a Boolean from the specified key of the specified section.</summary>
+		/// <param name="section">The section to search in.</param>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <returns>Returns the value of the specified section/key pair, or returns false if the specified section/key pair isn't found in the INI file.</returns>
+		public bool ReadBoolean(string section, string key)
+		{
+			return ReadBoolean(section, key, false);
+		}
+		/// <summary>Reads a Boolean from the specified key of the specified section.</summary>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <param name="defVal">The value to return if the specified key isn't found.</param>
+		/// <returns>Returns the value of the specified key pair, or returns the default value if the specified key isn't found in the active section of the INI file.</returns>
+		public bool ReadBoolean(string key, bool defVal)
+		{
+			return ReadBoolean(Section, key, defVal);
+		}
+		/// <summary>Reads a Boolean from the specified key of the specified section.</summary>
+		/// <param name="key">The key from which to return the value.</param>
+		/// <returns>Returns the value of the specified key, or returns false if the specified key isn't found in the active section of the INI file.</returns>
+		public bool ReadBoolean(string key)
+		{
+			return ReadBoolean(Section, key);
+		}
+		/// <summary>Writes an Integer to the specified key in the specified section.</summary>
+		/// <param name="section">The section to write in.</param>
+		/// <param name="key">The key to write to.</param>
+		/// <param name="value">The value to write.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool Write(string section, string key, int value)
+		{
+			return Write(section, key, value.ToString());
+		}
+		/// <summary>Writes an Integer to the specified key in the active section.</summary>
+		/// <param name="key">The key to write to.</param>
+		/// <param name="value">The value to write.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool Write(string key, int value)
+		{
+			return Write(Section, key, value);
+		}
+		/// <summary>Writes a String to the specified key in the specified section.</summary>
+		/// <param name="section">Specifies the section to write in.</param>
+		/// <param name="key">Specifies the key to write to.</param>
+		/// <param name="value">Specifies the value to write.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool Write(string section, string key, string value)
+		{
+			return (WritePrivateProfileString(section, key, value, Filename) != 0);
+		}
+		/// <summary>Writes a String to the specified key in the active section.</summary>
+		///	<param name="key">The key to write to.</param>
+		/// <param name="value">The value to write.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool Write(string key, string value)
+		{
+			return Write(Section, key, value);
+		}
+		/// <summary>Writes a Long to the specified key in the specified section.</summary>
+		/// <param name="section">The section to write in.</param>
+		/// <param name="key">The key to write to.</param>
+		/// <param name="value">The value to write.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool Write(string section, string key, long value)
+		{
+			return Write(section, key, value.ToString());
+		}
+		/// <summary>Writes a Long to the specified key in the active section.</summary>
+		/// <param name="key">The key to write to.</param>
+		/// <param name="value">The value to write.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool Write(string key, long value)
+		{
+			return Write(Section, key, value);
+		}
+		/// <summary>Writes a Byte array to the specified key in the specified section.</summary>
+		/// <param name="section">The section to write in.</param>
+		/// <param name="key">The key to write to.</param>
+		/// <param name="value">The value to write.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool Write(string section, string key, byte[] value)
+		{
+			if (value == null)
+				return Write(section, key, (string)null);
+			else
+				return Write(section, key, value, 0, value.Length);
+		}
+		/// <summary>Writes a Byte array to the specified key in the active section.</summary>
+		/// <param name="key">The key to write to.</param>
+		/// <param name="value">The value to write.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool Write(string key, byte[] value)
+		{
+			return Write(Section, key, value);
+		}
+		/// <summary>Writes a Byte array to the specified key in the specified section.</summary>
+		/// <param name="section">The section to write in.</param>
+		/// <param name="key">The key to write to.</param>
+		/// <param name="value">The value to write.</param>
+		/// <param name="offset">An offset in <i>value</i>.</param>
+		/// <param name="length">The number of elements of <i>value</i> to convert.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool Write(string section, string key, byte[] value, int offset, int length)
+		{
+			if (value == null)
+				return Write(section, key, (string)null);
+			else
+				return Write(section, key, Convert.ToBase64String(value, offset, length));
+		}
+		/// <summary>Writes a Boolean to the specified key in the specified section.</summary>
+		/// <param name="section">The section to write in.</param>
+		/// <param name="key">The key to write to.</param>
+		/// <param name="value">The value to write.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool Write(string section, string key, bool value)
+		{
+			return Write(section, key, value.ToString());
+		}
+		/// <summary>Writes a Boolean to the specified key in the active section.</summary>
+		/// <param name="key">The key to write to.</param>
+		/// <param name="value">The value to write.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool Write(string key, bool value)
+		{
+			return Write(Section, key, value);
+		}
+		/// <summary>Deletes a key from the specified section.</summary>
+		/// <param name="section">The section to delete from.</param>
+		/// <param name="key">The key to delete.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool DeleteKey(string section, string key)
+		{
+			return (WritePrivateProfileString(section, key, null, Filename) != 0);
+		}
+		/// <summary>Deletes a key from the active section.</summary>
+		/// <param name="key">The key to delete.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool DeleteKey(string key)
+		{
+			return (WritePrivateProfileString(Section, key, null, Filename) != 0);
+		}
+		/// <summary>Deletes a section from an INI file.</summary>
+		/// <param name="section">The section to delete.</param>
+		/// <returns>Returns true if the function succeeds, false otherwise.</returns>
+		public bool DeleteSection(string section)
+		{
+			return WritePrivateProfileSection(section, null, Filename) != 0;
+		}
+		/// <summary>Retrieves a list of all available sections in the INI file.</summary>
+		/// <returns>Returns an ArrayList with all available sections.</returns>
+		public ArrayList GetSectionNames()
+		{
+			try
+			{
+				byte[] buffer = new byte[MAX_ENTRY];
+				GetPrivateProfileSectionNames(buffer, MAX_ENTRY, Filename);
+				string[] parts = Encoding.ASCII.GetString(buffer).Trim('\0').Split('\0');
+				return new ArrayList(parts);
+			}
+			catch { }
+			return null;
+		}
+		//Private variables and constants
+		/// <summary>
+		/// Holds the full path to the INI file.
+		/// </summary>
+		private string m_Filename;
+		/// <summary>
+		/// Holds the active section name
+		/// </summary>
+		private string m_Section;
+		/// <summary>
+		/// The maximum number of bytes in a section buffer.
+		/// </summary>
+		private const int MAX_ENTRY = 32768;
+	}
+}

PROMS/ReferencedObjectsOld/LibSource/Org.Mentalis.Files/Org.Mentalis.Files.csproj

@@ -0,0 +1,47 @@
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProductVersion>8.0.50727</ProductVersion>
+    <SchemaVersion>2.0</SchemaVersion>
+    <ProjectGuid>{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}</ProjectGuid>
+    <OutputType>Library</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>Org.Mentalis.Files</RootNamespace>
+    <AssemblyName>Org.Mentalis.Files</AssemblyName>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Xml" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="IniReader.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+  </ItemGroup>
+  <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
+  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
+       Other similar extension points exist, see Microsoft.Common.targets.
+  <Target Name="BeforeBuild">
+  </Target>
+  <Target Name="AfterBuild">
+  </Target>
+  -->
+</Project>

PROMS/ReferencedObjectsOld/LibSource/Org.Mentalis.Files/Properties/AssemblyInfo.cs

@@ -0,0 +1,35 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("Org.Mentalis.Files")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("Org.Mentalis.Files")]
+[assembly: AssemblyCopyright("Copyright ©  2012")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible 
+// to COM components.  If you need to access a type in this assembly from 
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("fd26053d-c25d-46ca-961c-7016c31e8b4b")]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]

PROMS/ReferencedObjectsOld/LibSource/Org.Mentalis.Files/Properties/AssemblyInfo.cs.bak

@@ -0,0 +1,36 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("Org.Mentalis.Files")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("Org.Mentalis.Files")]
+[assembly: AssemblyCopyright("Copyright ©  2012")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible 
+// to COM components.  If you need to access a type in this assembly from 
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("fd26053d-c25d-46ca-961c-7016c31e8b4b")]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyKeyFile("E:\\proms.net\\Public Key\\vlnkey.snk")]
+[assembly: AssemblyFileVersion("1.0.0.0")]

PROMS/ReferencedObjectsOld/LibSource/RODBInterface/AssemblyInfo.cs

@@ -0,0 +1,55 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//

PROMS/ReferencedObjectsOld/LibSource/RODBInterface/AssemblyInfo.cs.bak

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("E:\\proms.net\\Public Key\\vlnkey.snk")]
+[assembly: AssemblyKeyName("")]

PROMS/ReferencedObjectsOld/LibSource/RODBInterface/RODBInterface.csproj

@@ -0,0 +1,136 @@
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup>
+    <ProjectType>Local</ProjectType>
+    <ProductVersion>8.0.50727</ProductVersion>
+    <SchemaVersion>2.0</SchemaVersion>
+    <ProjectGuid>{0C7825FD-AA05-11D6-84D1-00A0CC271352}</ProjectGuid>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ApplicationIcon>
+    </ApplicationIcon>
+    <AssemblyKeyContainerName>
+    </AssemblyKeyContainerName>
+    <AssemblyName>RODBInterface</AssemblyName>
+    <AssemblyOriginatorKeyFile>
+    </AssemblyOriginatorKeyFile>
+    <DefaultClientScript>JScript</DefaultClientScript>
+    <DefaultHTMLPageLayout>Grid</DefaultHTMLPageLayout>
+    <DefaultTargetSchema>IE50</DefaultTargetSchema>
+    <DelaySign>false</DelaySign>
+    <OutputType>Library</OutputType>
+    <RootNamespace>RODBInterface</RootNamespace>
+    <RunPostBuildEvent>OnBuildSuccess</RunPostBuildEvent>
+    <StartupObject>
+    </StartupObject>
+    <FileUpgradeFlags>
+    </FileUpgradeFlags>
+    <UpgradeBackupLocation>
+    </UpgradeBackupLocation>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <OutputPath>bin\Debug\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>true</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <NoStdLib>false</NoStdLib>
+    <NoWarn>
+    </NoWarn>
+    <Optimize>false</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>full</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <OutputPath>bin\Release\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>TRACE</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>false</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <NoStdLib>false</NoStdLib>
+    <NoWarn>
+    </NoWarn>
+    <Optimize>true</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>none</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System">
+      <Name>System</Name>
+    </Reference>
+    <Reference Include="System.Data">
+      <Name>System.Data</Name>
+    </Reference>
+    <Reference Include="System.Drawing">
+      <Name>System.Drawing</Name>
+    </Reference>
+    <Reference Include="System.Windows.Forms">
+      <Name>System.Windows.Forms</Name>
+    </Reference>
+    <Reference Include="System.Xml">
+      <Name>System.XML</Name>
+    </Reference>
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="AssemblyInfo.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="RODBInterface.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="userpass.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="VlnXml.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <EmbeddedResource Include="userpass.resx">
+      <DependentUpon>userpass.cs</DependentUpon>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\DBEncapsulation\DBEncapsulation.csproj">
+      <Project>{6D44F537-879E-11D6-84B8-00A0CC271352}</Project>
+      <Name>DBEncapsulation</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\Org.Mentalis.Files\Org.Mentalis.Files.csproj">
+      <Project>{A46428FC-1E35-4B8D-8B06-A1DF8BAC7A04}</Project>
+      <Name>Org.Mentalis.Files</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\ROField\ROFields.csproj">
+      <Project>{0C782592-AA05-11D6-84D1-00A0CC271352}</Project>
+      <Name>ROFields</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\VlnStatus\VlnStatus.csproj">
+      <Project>{551CB7B3-00B1-11D7-8590-482B59000000}</Project>
+      <Name>VlnStatus</Name>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
+  <PropertyGroup>
+    <PreBuildEvent>
+    </PreBuildEvent>
+    <PostBuildEvent>
+    </PostBuildEvent>
+  </PropertyGroup>
+</Project>

PROMS/ReferencedObjectsOld/LibSource/RODBInterface/RODBInterface.sln

@@ -0,0 +1,21 @@
+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "RODBInterface", "RODBInterface.csproj", "{0C7825FD-AA05-11D6-84D1-00A0CC271352}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		Debug = Debug
+		Release = Release
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Debug.ActiveCfg = Debug|.NET
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Debug.Build.0 = Debug|.NET
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Release.ActiveCfg = Release|.NET
+		{0C7825FD-AA05-11D6-84D1-00A0CC271352}.Release.Build.0 = Release|.NET
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

PROMS/ReferencedObjectsOld/LibSource/RODBInterface/userpass.cs

@@ -0,0 +1,188 @@
+using System;
+using System.Drawing;
+using System.Collections;
+using System.ComponentModel;
+using System.Windows.Forms;
+
+
+namespace RODBInterface
+{
+	/// <summary>
+	/// Summary description for userpass.
+	/// </summary>
+	public class userpass : System.Windows.Forms.Form
+	{
+		/// <summary>
+		/// Required designer variable.
+		/// </summary>
+		private System.ComponentModel.Container components = null;
+		private System.Windows.Forms.Label uidLbl;
+		private System.Windows.Forms.Label pwLbl;
+		private System.Windows.Forms.Button OKBtn;
+		internal System.Windows.Forms.Button CancelBtn;
+		private System.Windows.Forms.TextBox uidTxtBx;
+		private System.Windows.Forms.TextBox pwTxtBx;
+
+		//public UidPw UIDPW
+		//{
+		//	get
+		//	{
+		//		UidPw up = new UidPw();
+		//		up.Password = this.pwTxtBx.Text;
+		//		up.UserId = this.uidTxtBx.Text;
+		//		return up;
+		//	}
+		//}
+
+		public string uname=null;
+		public string pword=null;
+		public userpass()
+		{
+			//
+			// Required for Windows Form Designer support
+			//
+			InitializeComponent();
+
+			//
+			// TODO: Add any constructor code after InitializeComponent call
+			//
+		}
+
+		public userpass(string PassedInName)
+		{
+			//
+			// Required for Windows Form Designer support
+			//
+			InitializeComponent();
+
+			//
+			// TODO: Add any constructor code after InitializeComponent call
+			//
+			uidTxtBx.Text = PassedInName;
+		}
+
+		/// <summary>
+		/// Clean up any resources being used.
+		/// </summary>
+		protected override void Dispose( bool disposing )
+		{
+			if( disposing )
+			{
+				if(components != null)
+				{
+					components.Dispose();
+				}
+			}
+			base.Dispose( disposing );
+		}
+	
+		#region Windows Form Designer generated code
+		/// <summary>
+		/// Required method for Designer support - do not modify
+		/// the contents of this method with the code editor.
+		/// </summary>
+		private void InitializeComponent()
+		{
+			this.uidTxtBx = new System.Windows.Forms.TextBox();
+			this.uidLbl = new System.Windows.Forms.Label();
+			this.pwLbl = new System.Windows.Forms.Label();
+			this.pwTxtBx = new System.Windows.Forms.TextBox();
+			this.OKBtn = new System.Windows.Forms.Button();
+			this.CancelBtn = new System.Windows.Forms.Button();
+			this.SuspendLayout();
+			// 
+			// uidTxtBx
+			// 
+			this.uidTxtBx.Location = new System.Drawing.Point(8, 40);
+			this.uidTxtBx.Name = "uidTxtBx";
+			this.uidTxtBx.Size = new System.Drawing.Size(134, 22);
+			this.uidTxtBx.TabIndex = 0;
+			this.uidTxtBx.Text = "";
+			this.uidTxtBx.KeyUp += new System.Windows.Forms.KeyEventHandler(this.uidTxtBx_KeyUp);
+			// 
+			// uidLbl
+			// 
+			this.uidLbl.Location = new System.Drawing.Point(16, 16);
+			this.uidLbl.Name = "uidLbl";
+			this.uidLbl.Size = new System.Drawing.Size(115, 18);
+			this.uidLbl.TabIndex = 1;
+			this.uidLbl.Text = "User ID";
+			// 
+			// pwLbl
+			// 
+			this.pwLbl.Location = new System.Drawing.Point(184, 16);
+			this.pwLbl.Name = "pwLbl";
+			this.pwLbl.Size = new System.Drawing.Size(86, 18);
+			this.pwLbl.TabIndex = 2;
+			this.pwLbl.Text = "Password";
+			// 
+			// pwTxtBx
+			// 
+			this.pwTxtBx.AcceptsTab = true;
+			this.pwTxtBx.Location = new System.Drawing.Point(176, 40);
+			this.pwTxtBx.Name = "pwTxtBx";
+			this.pwTxtBx.PasswordChar = '*';
+			this.pwTxtBx.Size = new System.Drawing.Size(125, 22);
+			this.pwTxtBx.TabIndex = 3;
+			this.pwTxtBx.Text = "";
+			this.pwTxtBx.KeyUp += new System.Windows.Forms.KeyEventHandler(this.pwTxtBx_KeyUp);
+			// 
+			// OKBtn
+			// 
+			this.OKBtn.DialogResult = System.Windows.Forms.DialogResult.OK;
+			this.OKBtn.Location = new System.Drawing.Point(336, 16);
+			this.OKBtn.Name = "OKBtn";
+			this.OKBtn.Size = new System.Drawing.Size(96, 28);
+			this.OKBtn.TabIndex = 4;
+			this.OKBtn.Text = "OK";
+			this.OKBtn.Click += new System.EventHandler(this.OKBtn_Click);
+			// 
+			// CancelBtn
+			// 
+			this.CancelBtn.DialogResult = System.Windows.Forms.DialogResult.Cancel;
+			this.CancelBtn.Location = new System.Drawing.Point(336, 56);
+			this.CancelBtn.Name = "CancelBtn";
+			this.CancelBtn.Size = new System.Drawing.Size(96, 28);
+			this.CancelBtn.TabIndex = 5;
+			this.CancelBtn.Text = "Cancel";
+			// 
+			// userpass
+			// 
+			this.AccessibleRole = System.Windows.Forms.AccessibleRole.None;
+			this.AutoScaleBaseSize = new System.Drawing.Size(6, 15);
+			this.ClientSize = new System.Drawing.Size(448, 96);
+			this.ControlBox = false;
+			this.Controls.Add(this.CancelBtn);
+			this.Controls.Add(this.OKBtn);
+			this.Controls.Add(this.pwTxtBx);
+			this.Controls.Add(this.uidTxtBx);
+			this.Controls.Add(this.pwLbl);
+			this.Controls.Add(this.uidLbl);
+			this.MaximizeBox = false;
+			this.MinimizeBox = false;
+			this.Name = "userpass";
+			this.Text = " Login";
+			this.ResumeLayout(false);
+
+		}
+		#endregion
+
+		private void OKBtn_Click(object sender, System.EventArgs e)
+		{
+			uname = this.uidTxtBx.Text;
+			pword = this.pwTxtBx.Text;
+		}
+
+		private void pwTxtBx_KeyUp(object sender, System.Windows.Forms.KeyEventArgs e)
+		{
+			// if key pressed was a return - treat as ok button.
+			if (e.KeyCode == Keys.Return) this.OKBtn.PerformClick();
+		}
+
+		private void uidTxtBx_KeyUp(object sender, System.Windows.Forms.KeyEventArgs e)
+		{
+			// if key pressed was a return - treat as ok button.
+			if (e.KeyCode == Keys.Return) this.OKBtn.PerformClick();
+		}
+	}
+}

PROMS/ReferencedObjectsOld/LibSource/RODBInterface/userpass.resx

@@ -0,0 +1,184 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 1.3
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">1.3</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1">this is my long string</data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        [base64 mime encoded serialized .NET Framework object]
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        [base64 mime encoded string representing a byte array form of the .NET Framework object]
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used forserialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>1.3</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="uidTxtBx.DefaultModifiers" type="System.CodeDom.MemberAttributes, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>Private</value>
+  </data>
+  <data name="uidTxtBx.Locked" type="System.Boolean, mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>False</value>
+  </data>
+  <data name="uidTxtBx.Modifiers" type="System.CodeDom.MemberAttributes, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>Private</value>
+  </data>
+  <data name="uidLbl.Locked" type="System.Boolean, mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>False</value>
+  </data>
+  <data name="uidLbl.DefaultModifiers" type="System.CodeDom.MemberAttributes, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>Private</value>
+  </data>
+  <data name="uidLbl.Modifiers" type="System.CodeDom.MemberAttributes, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>Private</value>
+  </data>
+  <data name="pwLbl.Locked" type="System.Boolean, mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>False</value>
+  </data>
+  <data name="pwLbl.DefaultModifiers" type="System.CodeDom.MemberAttributes, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>Private</value>
+  </data>
+  <data name="pwLbl.Modifiers" type="System.CodeDom.MemberAttributes, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>Private</value>
+  </data>
+  <data name="pwTxtBx.DefaultModifiers" type="System.CodeDom.MemberAttributes, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>Private</value>
+  </data>
+  <data name="pwTxtBx.Locked" type="System.Boolean, mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>False</value>
+  </data>
+  <data name="pwTxtBx.Modifiers" type="System.CodeDom.MemberAttributes, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>Private</value>
+  </data>
+  <data name="OKBtn.Locked" type="System.Boolean, mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>False</value>
+  </data>
+  <data name="OKBtn.DefaultModifiers" type="System.CodeDom.MemberAttributes, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>Private</value>
+  </data>
+  <data name="OKBtn.Modifiers" type="System.CodeDom.MemberAttributes, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>Private</value>
+  </data>
+  <data name="CancelBtn.Locked" type="System.Boolean, mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>False</value>
+  </data>
+  <data name="CancelBtn.DefaultModifiers" type="System.CodeDom.MemberAttributes, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>Private</value>
+  </data>
+  <data name="CancelBtn.Modifiers" type="System.CodeDom.MemberAttributes, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>Assembly</value>
+  </data>
+  <data name="$this.Locked" type="System.Boolean, mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>False</value>
+  </data>
+  <data name="$this.Language" type="System.Globalization.CultureInfo, mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>(Default)</value>
+  </data>
+  <data name="$this.TrayLargeIcon" type="System.Boolean, mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>False</value>
+  </data>
+  <data name="$this.Localizable" type="System.Boolean, mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>False</value>
+  </data>
+  <data name="$this.GridSize" type="System.Drawing.Size, System.Drawing, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
+    <value>8, 8</value>
+  </data>
+  <data name="$this.DrawGrid" type="System.Boolean, mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>True</value>
+  </data>
+  <data name="$this.TrayHeight" type="System.Int32, mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>80</value>
+  </data>
+  <data name="$this.SnapToGrid" type="System.Boolean, mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>True</value>
+  </data>
+  <data name="$this.Name">
+    <value>userpass</value>
+  </data>
+  <data name="$this.DefaultModifiers" type="System.CodeDom.MemberAttributes, System, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>Private</value>
+  </data>
+</root>

PROMS/ReferencedObjectsOld/LibSource/ROFST/AssemblyInfo.cs

@@ -0,0 +1,55 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//

PROMS/ReferencedObjectsOld/LibSource/ROFST/AssemblyInfo.cs.bak

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("E:\\proms.net\\Public Key\\vlnkey.snk")]
+[assembly: AssemblyKeyName("")]

PROMS/ReferencedObjectsOld/LibSource/ROFST/ROFST.csproj

@@ -0,0 +1,115 @@
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup>
+    <ProjectType>Local</ProjectType>
+    <ProductVersion>8.0.50727</ProductVersion>
+    <SchemaVersion>2.0</SchemaVersion>
+    <ProjectGuid>{134D8938-9CDC-4712-9444-D5DCC6638AB6}</ProjectGuid>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ApplicationIcon>
+    </ApplicationIcon>
+    <AssemblyKeyContainerName>
+    </AssemblyKeyContainerName>
+    <AssemblyName>ROFST</AssemblyName>
+    <AssemblyOriginatorKeyFile>
+    </AssemblyOriginatorKeyFile>
+    <DefaultClientScript>JScript</DefaultClientScript>
+    <DefaultHTMLPageLayout>Grid</DefaultHTMLPageLayout>
+    <DefaultTargetSchema>IE50</DefaultTargetSchema>
+    <DelaySign>false</DelaySign>
+    <OutputType>Library</OutputType>
+    <RootNamespace>ROFST</RootNamespace>
+    <RunPostBuildEvent>OnBuildSuccess</RunPostBuildEvent>
+    <StartupObject>
+    </StartupObject>
+    <FileUpgradeFlags>
+    </FileUpgradeFlags>
+    <UpgradeBackupLocation>
+    </UpgradeBackupLocation>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <OutputPath>bin\Debug\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>DEBUG;TRACE;Upgrade2005;</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>true</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <NoStdLib>false</NoStdLib>
+    <NoWarn>
+    </NoWarn>
+    <Optimize>false</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>full</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <OutputPath>bin\Release\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>TRACE</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>false</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <NoStdLib>false</NoStdLib>
+    <NoWarn>
+    </NoWarn>
+    <Optimize>true</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>none</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System">
+      <Name>System</Name>
+    </Reference>
+    <Reference Include="System.Data">
+      <Name>System.Data</Name>
+    </Reference>
+    <Reference Include="System.Windows.Forms">
+      <Name>System.Windows.Forms</Name>
+    </Reference>
+    <Reference Include="System.Xml">
+      <Name>System.XML</Name>
+    </Reference>
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="AssemblyInfo.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="ROFST.cs">
+      <SubType>Code</SubType>
+    </Compile>
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\Utils\Utils.csproj">
+      <Project>{680054D3-49C4-40E7-92A5-67B97DCE6308}</Project>
+      <Name>Utils</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\VlnStatus\VlnStatus.csproj">
+      <Project>{551CB7B3-00B1-11D7-8590-482B59000000}</Project>
+      <Name>VlnStatus</Name>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
+  <PropertyGroup>
+    <PreBuildEvent>
+    </PreBuildEvent>
+    <PostBuildEvent>
+    </PostBuildEvent>
+  </PropertyGroup>
+</Project>

PROMS/ReferencedObjectsOld/LibSource/ROFST/ROFST.sln

@@ -0,0 +1,19 @@
+Microsoft Visual Studio Solution File, Format Version 9.00
+# Visual Studio 2005
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "ROFST", "ROFST.csproj", "{134D8938-9CDC-4712-9444-D5DCC6638AB6}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Release|Any CPU = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{134D8938-9CDC-4712-9444-D5DCC6638AB6}.Release|Any CPU.Build.0 = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal

PROMS/ReferencedObjectsOld/LibSource/ROField/AssemblyInfo.cs

@@ -0,0 +1,55 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//

PROMS/ReferencedObjectsOld/LibSource/ROField/AssemblyInfo.cs.bak

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("E:\\proms.net\\Public Key\\vlnkey.snk")]
+[assembly: AssemblyKeyName("")]

PROMS/ReferencedObjectsOld/LibSource/ROField/ROField.cs

@@ -0,0 +1,301 @@
+/*********************************************************************************************
+ * Copyright 2002 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: ROField.cs $     $Revision: 11 $
+ * $Author: Kathy $   $Date: 4/04/03 9:41a $
+ *
+ * $History: ROField.cs $
+ * 
+ * *****************  Version 11  *****************
+ * User: Kathy        Date: 4/04/03    Time: 9:41a
+ * Updated in $/LibSource/ROFields
+ * B2003-030: get correct field type for new image
+ * 
+ * *****************  Version 10  *****************
+ * User: Kathy        Date: 12/10/02   Time: 2:27p
+ * Updated in $/LibSource/ROFields
+ * fieldname special chars 
+ * 
+ * *****************  Version 9  *****************
+ * User: Kathy        Date: 12/02/02   Time: 8:30a
+ * Updated in $/LibSource/ROFields
+ * fieldname replace chars
+ * 
+ * *****************  Version 8  *****************
+ * User: Kathy        Date: 11/11/02   Time: 7:14a
+ * Updated in $/LibSource/ROFields
+ * image field type should be 32 not 20 
+ * 
+ * *****************  Version 7  *****************
+ * User: Kathy        Date: 10/15/02   Time: 2:17p
+ * Updated in $/LibSource/ROFields
+ * combo field number
+ * 
+ * *****************  Version 6  *****************
+ * User: Kathy        Date: 9/27/02    Time: 1:11p
+ * Updated in $/LibSource/ROFields
+ * fix digit as first char in fieldname
+ * 
+ * *****************  Version 5  *****************
+ * User: Kathy        Date: 9/25/02    Time: 2:31p
+ * Updated in $/LibSource/ROFields
+ * multitxt->variable
+ * 
+ * *****************  Version 4  *****************
+ * User: Kathy        Date: 9/03/02    Time: 2:53p
+ * Updated in $/LibSource/ROFields
+ * missing " on image field def.
+ * 
+ * *****************  Version 3  *****************
+ * User: Kathy        Date: 8/30/02    Time: 11:56a
+ * Updated in $/LibSource/ROFields
+ * image
+ * 
+ * *****************  Version 2  *****************
+ * User: Kathy        Date: 8/28/02    Time: 10:59a
+ * Updated in $/LibSource/ROFields
+ * development
+ *********************************************************************************************/
+
+using System;
+using System.Text;
+
+namespace ROFields
+{
+	public enum FieldTypes: uint
+	{
+		Nil=0, SingleTxt=1, VariableTxt=2, FrmtSingleTxt=4, XYPlot=8, Table=10, Image=32, 
+		MultiTxt=40, Combination=128, MultiFld=100
+	}
+
+	/// <summary>
+	/// Summary description for ROField: This class contains RO Field information. Each ROField
+	/// contains:
+	///   string fieldname - the name of the field
+	///   string recid -  its database record id (used to interface to the database - null if
+	///      not created yet.
+	///   string masterrecID - its record id in the master if appropriate.
+	///   uint fieldtype - the field type as defined in the enum FieldTypes (listed above)
+	/// </summary>
+	public class ROField
+	{
+		string fieldname;
+		string recID;
+		string masterrecID;
+		uint fldtype;
+
+		// constuctor
+		public ROField(string fname, string rID, string mrID, uint fieldtype)
+		{
+			fieldname = fname;
+			recID = rID;
+			masterrecID = mrID;
+			fldtype = fieldtype;
+		}
+		public string GetFieldname { get {return fieldname;}}
+		public string GetRecID { get {return recID;}}
+		public string GetMasterRecID { get {return masterrecID;}}
+		public uint GetFieldType{ get {return fldtype;}}
+		public void SetFieldname(string name) {fieldname = name;}
+		public void SetRecID(string recid) {recID = recid;}
+		public void SetMasterRecID(string mrecid) {masterrecID = mrecid;}
+		public void SetFieldType(uint ftype) {fldtype = ftype;}
+		
+		// Given a schema string, determine which RO Field type it is.
+		public uint ParseFieldType(string info)
+		{
+			int indx;
+			// formatted single line text has 'pattern' in schema definition)
+			indx = info.IndexOf("xsd:pattern");
+			if (indx >= 0) return (uint) FieldTypes.FrmtSingleTxt;
+
+			// Combination field has 'choice' in schema definition
+			indx = info.IndexOf("xsd:choice");
+			if (indx >= 0) return (uint) FieldTypes.Combination;
+		
+			// image  - search for 'Image_Height', in case Image is in the string from some other mechanism
+			indx = info.IndexOf("Image_Height");    
+			if (indx >=0) return (uint) FieldTypes.Image;
+
+			// single line text has 'normalizedString' (pattern does too, but
+			// it would be eliminated above.
+			indx = info.IndexOf("xsd:normalizedString");
+			if (indx >=0) return (uint) FieldTypes.SingleTxt;
+
+			// now look for all of the multi-line fields: multi text, table, & XY Plot
+			indx = info.IndexOf("xsd:string");
+			if (indx <0) indx = info.IndexOf("xsd:String");
+			if (indx >=0) 
+			{
+				int indxspecific;
+				indxspecific = info.IndexOf("Variable");
+				if (indxspecific >= 0) return (uint) FieldTypes.VariableTxt;
+				indxspecific = info.IndexOf("Table");
+				if (indxspecific >= 0) return (uint) FieldTypes.Table;
+				indxspecific = info.IndexOf("XYPlot");
+				if (indxspecific >= 0) return (uint) FieldTypes.XYPlot;
+			}
+
+		//	indx = info.IndexOf("Image");  
+		//	if (indx >=0) return (uint) FieldTypes.Image;
+
+			return 1000;
+		}
+
+		// Creates a string representing the schema for this field. note that the input
+		// fieldname will override that which is stored for this ROField (for editting
+		// purposes).
+		public string MakeFieldName(string fldname)
+		{
+			if (fldname.Length < 2)
+				return fldname;
+			// a digit cannot start an xml fieldname, prepend a "__" to it.
+			string tmp0;
+			if (char.IsDigit(fldname,0))
+				tmp0 = "__" + fldname;
+			else
+				tmp0 = fldname;
+			// an xml fieldname cannot have a space, change it to a "__"
+			string tmpstr = tmp0.Replace(" ","__");
+			int len = tmpstr.Length;
+			int cnt = 0;
+
+			// this is also our sequence that tells us the follow 3 digits is the ascii number (base 10)
+			// of the character we replaced.
+			string OKpunch = "-._"; 
+
+			string outstr = "";
+			int decval;
+
+			while (cnt < len)
+			{
+				char tmpchr = tmpstr[cnt];
+				if(!char.IsLetterOrDigit(tmpchr)&& (OKpunch.IndexOf(tmpchr) == -1) )
+				{
+					decval = tmpchr;
+					outstr += OKpunch + decval.ToString("D3");
+				}
+				else
+				{
+					outstr += tmpchr.ToString();
+				}
+				cnt++;
+			}
+			return outstr;
+		}
+
+		public string MakeSchemaString(string fieldname, string width, string pattern)
+		{
+			uint ftype = this.GetFieldType;
+			StringBuilder strbld = new StringBuilder();
+			strbld.Append("<xsd:element name=\"");
+			strbld.Append(MakeFieldName(fieldname));
+			strbld.Append("\" minOccurs=\"0\">\n");
+			if (ftype == (uint)FieldTypes.VariableTxt || ftype == (uint)FieldTypes.Table || ftype == (uint)FieldTypes.XYPlot)
+			{
+				strbld.Append("<xsd:annotation>\n<xsd:documentation xml:lang=\"en\">");
+				if (ftype == (uint)FieldTypes.VariableTxt)
+					strbld.Append("Variable");
+				else if (ftype == (uint)FieldTypes.Table)
+					strbld.Append("Table");
+				else
+					strbld.Append("XYPlot");
+				strbld.Append("</xsd:documentation>\n</xsd:annotation>");
+			}	
+			strbld.Append("<xsd:simpleType>\n<xsd:restriction base=\"xsd:");
+			if (ftype == (uint)FieldTypes.FrmtSingleTxt || ftype == (uint)FieldTypes.SingleTxt)
+				strbld.Append("normalizedString\">\n<xsd:maxLength value=\"");
+			else
+				strbld.Append("String\">\n<xsd:maxLength value=\"");
+			strbld.Append(width);	
+			strbld.Append("\" />\n");
+			if (ftype == (uint)FieldTypes.FrmtSingleTxt)
+			{
+				strbld.Append("<xsd:pattern value=\"");
+				strbld.Append(pattern);
+				strbld.Append("\" />\n");
+			}
+			strbld.Append("</xsd:restriction>\n</xsd:simpleType>\n</xsd:element>");
+			return (strbld.ToString());
+		}
+
+		public string MakeComboSchemaString(string fieldname, bool fixd, string fixdwid, bool multi, string multiwid, 
+			bool table, string tablewid, bool xyplot, string xyplotwid)
+		{
+			StringBuilder strbld = new StringBuilder();
+			strbld.Append("<xsd:choice>\n");
+			if (fixd == true)
+			{
+				strbld.Append("<xsd:element name=\"");
+				strbld.Append(MakeFieldName(fieldname)+"a");
+				strbld.Append("\" type=\"Fixed\" minOccurs=\"0\">\n");
+				strbld.Append("<xsd:simpleType>\n<xsd:restriction base=\"xsd:normalizedString\">\n<xsd:maxLength value=\"");
+				strbld.Append(fixdwid);
+				strbld.Append("\" />\n</xsd:restriction>\n</xsd:simpleType>\n</xsd:element>\n");
+			}
+			if (multi == true)
+			{
+				strbld.Append("<xsd:element name=\"");
+				strbld.Append(MakeFieldName(fieldname)+"b");
+				strbld.Append("\" type=\"Variable\" minOccurs=\"0\">\n");
+				strbld.Append("<xsd:annotation>\n<xsd:documentation xml:lang=\"en\">\nVariable\n");
+				strbld.Append("</xsd:documentation>\n</xsd:annotation>\n<xsd:simpleType name=\"Variable\">\n");
+				strbld.Append("<xsd:restriction base=\"xsd:string\">\n<xsd:maxLength value=\"");
+				strbld.Append(multiwid);
+				strbld.Append("\" />\n</xsd:restriction>\n</xsd:simpleType>\n</xsd:element>\n");
+			}
+			if (table == true)
+			{
+				strbld.Append("<xsd:element name=\"");
+				strbld.Append(MakeFieldName(fieldname)+"c");
+				strbld.Append("\" type=\"Table\" minOccurs=\"0\">\n");
+				strbld.Append("<xsd:annotation>\n<xsd:documentation xml:lang=\"en\">\nTable\n");
+				strbld.Append("</xsd:documentation>\n</xsd:annotation>\n<xsd:simpleType name=\"Variable\">\n");
+				strbld.Append("<xsd:restriction base=\"xsd:string\">\n<xsd:maxLength value=\"");
+				strbld.Append(tablewid);
+				strbld.Append("\" />\n</xsd:restriction>\n</xsd:simpleType>\n</xsd:element>");
+			}
+			if (xyplot == true)
+			{
+				strbld.Append("<xsd:element name=\"");
+				strbld.Append(MakeFieldName(fieldname)+"d");
+				strbld.Append("\" type=\"XY_Plot\" minOccurs=\"0\">\n");
+				strbld.Append("<xsd:annotation>\n<xsd:documentation xml:lang=\"en\">\nXYPlot\n");
+				strbld.Append("</xsd:documentation>\n</xsd:annotation>\n<xsd:simpleType name=\"Variable\">\n");
+				strbld.Append("<xsd:restriction base=\"xsd:string\">\n<xsd:maxLength value=\"");
+				strbld.Append(xyplotwid);
+				strbld.Append("\" />\n</xsd:restriction>\n</xsd:simpleType>\n</xsd:element>");
+			}
+			strbld.Append("</xsd:choice>");
+			return (strbld.ToString());
+		}
+
+		public string MakeImageSchemaString(string fieldname)
+		{
+			StringBuilder strbld = new StringBuilder();
+			strbld.Append("<xsd:element name=\"");
+			strbld.Append(MakeFieldName(fieldname));
+			strbld.Append("\">\n<xsd:complexType>\n<xsd:sequence>");
+			strbld.Append("<xsd:element name=\"Image_Filename\" minOccurs=\"0\">\n");
+			strbld.Append("<xsd:simpleType>\n<xsd:annotation>\n");
+			strbld.Append("<xsd:documentation xml:lang=\"en\">VLN_FINDFILE</xsd:documentation>\n");
+			strbld.Append("</xsd:annotation>\n<xsd:restriction base=\"xsd:normalizedString\">\n");
+			strbld.Append("<xsd:maxLength value=\"70\" />\n</xsd:restriction>\n</xsd:simpleType>");
+			strbld.Append("</xsd:element>\n<xsd:element name=\"Image_Height\" minOccurs=\"0\">\n");
+			strbld.Append("<xsd:simpleType>\n<xsd:annotation>\n");
+			strbld.Append("<xsd:documentation xml:lang=\"en\">Lines (6 lines per inch)</xsd:documentation>\n");
+			strbld.Append("</xsd:annotation>\n<xsd:restriction base=\"xsd:normalizedString\">\n");
+			strbld.Append("<xsd:maxLength value=\"10\" />\n</xsd:restriction>\n</xsd:simpleType>\n");
+			strbld.Append("</xsd:element>\n<xsd:element name=\"Image_Width\" minOccurs=\"0\">\n");
+			strbld.Append("<xsd:simpleType>\n<xsd:annotation>\n");
+			strbld.Append("<xsd:documentation xml:lang=\"en\">Characters (12 chars. Per inch)</xsd:documentation>\n");
+			strbld.Append("</xsd:annotation>\n<xsd:restriction base=\"xsd:normalizedString\">\n");
+			strbld.Append("<xsd:maxLength value=\"10\" />\n</xsd:restriction>\n</xsd:simpleType>\n");
+			strbld.Append("</xsd:element>\n</xsd:sequence>\n</xsd:complexType>\n</xsd:element>");
+			return(strbld.ToString());
+		}
+
+	}
+
+}

PROMS/ReferencedObjectsOld/LibSource/ROField/ROFields.csproj

@@ -0,0 +1,102 @@
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup>
+    <ProjectType>Local</ProjectType>
+    <ProductVersion>8.0.50727</ProductVersion>
+    <SchemaVersion>2.0</SchemaVersion>
+    <ProjectGuid>{0C782592-AA05-11D6-84D1-00A0CC271352}</ProjectGuid>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ApplicationIcon>
+    </ApplicationIcon>
+    <AssemblyKeyContainerName>
+    </AssemblyKeyContainerName>
+    <AssemblyName>ROField</AssemblyName>
+    <AssemblyOriginatorKeyFile>
+    </AssemblyOriginatorKeyFile>
+    <DefaultClientScript>JScript</DefaultClientScript>
+    <DefaultHTMLPageLayout>Grid</DefaultHTMLPageLayout>
+    <DefaultTargetSchema>IE50</DefaultTargetSchema>
+    <DelaySign>false</DelaySign>
+    <OutputType>Library</OutputType>
+    <RootNamespace>ROField</RootNamespace>
+    <RunPostBuildEvent>OnBuildSuccess</RunPostBuildEvent>
+    <StartupObject>
+    </StartupObject>
+    <FileUpgradeFlags>
+    </FileUpgradeFlags>
+    <UpgradeBackupLocation>
+    </UpgradeBackupLocation>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <OutputPath>bin\Debug\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>true</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <NoStdLib>false</NoStdLib>
+    <NoWarn>
+    </NoWarn>
+    <Optimize>false</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>full</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <OutputPath>bin\Release\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>TRACE</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>false</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <NoStdLib>false</NoStdLib>
+    <NoWarn>
+    </NoWarn>
+    <Optimize>true</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>none</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System">
+      <Name>System</Name>
+    </Reference>
+    <Reference Include="System.Data">
+      <Name>System.Data</Name>
+    </Reference>
+    <Reference Include="System.Xml">
+      <Name>System.XML</Name>
+    </Reference>
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="AssemblyInfo.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="ROField.cs">
+      <SubType>Code</SubType>
+    </Compile>
+  </ItemGroup>
+  <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
+  <PropertyGroup>
+    <PreBuildEvent>
+    </PreBuildEvent>
+    <PostBuildEvent>
+    </PostBuildEvent>
+  </PropertyGroup>
+</Project>

PROMS/ReferencedObjectsOld/LibSource/ROField/ROFields.sln

@@ -0,0 +1,21 @@
+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "ROFields", "ROFields.csproj", "{0C782592-AA05-11D6-84D1-00A0CC271352}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		Debug = Debug
+		Release = Release
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Debug.ActiveCfg = Debug|.NET
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Debug.Build.0 = Debug|.NET
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Release.ActiveCfg = Release|.NET
+		{0C782592-AA05-11D6-84D1-00A0CC271352}.Release.Build.0 = Release|.NET
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

PROMS/ReferencedObjectsOld/LibSource/Utils/About.cs

@@ -0,0 +1,268 @@
+/*********************************************************************************************
+ * Copyright 2004 - Volian Enterprises, Inc. All rights reserved.
+ * Volian Enterprises - Proprietary Information - DO NOT COPY OR DISTRIBUTE
+ * ------------------------------------------------------------------------------
+ * $Workfile: About.cs $     $Revision: 5 $
+ * $Author: Jsj $   $Date: 1/02/08 1:38p $
+ *
+ * $History: About.cs $
+ * 
+ * *****************  Version 5  *****************
+ * User: Jsj          Date: 1/02/08    Time: 1:38p
+ * Updated in $/LibSource/Utils
+ * upped copyright to 2008
+ * 
+ * *****************  Version 4  *****************
+ * User: Jsj          Date: 1/02/07    Time: 1:53p
+ * Updated in $/LibSource/Utils
+ * uppped copyright to 2007
+ * 
+ * *****************  Version 3  *****************
+ * User: Jsj          Date: 7/18/06    Time: 11:40a
+ * Updated in $/LibSource/Utils
+ * turned off Microsoft Solution Provider logo.
+ * 
+ * *****************  Version 2  *****************
+ * User: Jsj          Date: 1/03/06    Time: 9:08a
+ * Updated in $/LibSource/Utils
+ * upped copyright to year 2005
+ * 
+ * *****************  Version 1  *****************
+ * User: Kathy        Date: 7/27/04    Time: 8:34a
+ * Created in $/LibSource/Utils
+ *********************************************************************************************/
+
+using System;
+using System.Drawing;
+using System.Collections;
+using System.ComponentModel;
+using System.Windows.Forms;
+
+namespace Utils
+{
+	/// <summary>
+	/// Summary description for About.
+	/// </summary>
+	public class AboutDlg : System.Windows.Forms.Form
+	{
+		private System.Windows.Forms.Button btnHlpAbtOK;
+		private System.Windows.Forms.Label CopyrightMessage;
+		private System.Windows.Forms.PictureBox pictureBox2;
+		private System.Windows.Forms.Label lblProgName;
+		private System.Windows.Forms.Label lblVerRelNums;
+		private System.Windows.Forms.Label lblSerialNumber;
+		private System.Windows.Forms.Label lblSerialNumTitle;
+		private System.Windows.Forms.Label lblUserID;
+		private System.Windows.Forms.LinkLabel VolianWebLink;
+		private System.Windows.Forms.Label lblLicenseTab;
+		/// <summary>
+		/// Required designer variable.
+		/// </summary>
+		private System.ComponentModel.Container components = null;
+
+		public AboutDlg(string ProgName, string SerialNoStr, string SnTitleTab, string SerialNoTitle, string VerRel, string cpyrght, string UIDstr)
+		{
+			//
+			// Required for Windows Form Designer support
+			//
+			InitializeComponent();
+			CopyrightMessage.Text = cpyrght;
+			this.lblProgName.Text = ProgName;
+			lblVerRelNums.Text = VerRel;
+			lblSerialNumber.Text = SerialNoStr;
+			lblSerialNumTitle.Text = SerialNoTitle;
+			lblUserID.Text = UIDstr;
+			lblLicenseTab.Text = SnTitleTab;
+		}
+
+		/// <summary>
+		/// Clean up any resources being used.
+		/// </summary>
+		protected override void Dispose( bool disposing )
+		{
+			if( disposing )
+			{
+				if(components != null)
+				{
+					components.Dispose();
+				}
+			}
+			base.Dispose( disposing );
+		}
+
+		#region Windows Form Designer generated code
+		/// <summary>
+		/// Required method for Designer support - do not modify
+		/// the contents of this method with the code editor.
+		/// </summary>
+		private void InitializeComponent()
+		{
+			System.Resources.ResourceManager resources = new System.Resources.ResourceManager(typeof(AboutDlg));
+			this.btnHlpAbtOK = new System.Windows.Forms.Button();
+			this.lblProgName = new System.Windows.Forms.Label();
+			this.lblVerRelNums = new System.Windows.Forms.Label();
+			this.lblSerialNumber = new System.Windows.Forms.Label();
+			this.CopyrightMessage = new System.Windows.Forms.Label();
+			this.lblUserID = new System.Windows.Forms.Label();
+			this.pictureBox2 = new System.Windows.Forms.PictureBox();
+			this.lblSerialNumTitle = new System.Windows.Forms.Label();
+			this.VolianWebLink = new System.Windows.Forms.LinkLabel();
+			this.lblLicenseTab = new System.Windows.Forms.Label();
+			this.SuspendLayout();
+			// 
+			// btnHlpAbtOK
+			// 
+			this.btnHlpAbtOK.BackColor = System.Drawing.Color.YellowGreen;
+			this.btnHlpAbtOK.Font = new System.Drawing.Font("Tahoma", 10.8F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.btnHlpAbtOK.Location = new System.Drawing.Point(144, 160);
+			this.btnHlpAbtOK.Name = "btnHlpAbtOK";
+			this.btnHlpAbtOK.Size = new System.Drawing.Size(96, 32);
+			this.btnHlpAbtOK.TabIndex = 0;
+			this.btnHlpAbtOK.Text = "OK";
+			this.btnHlpAbtOK.Click += new System.EventHandler(this.btnHlpAbtOK_Click);
+			// 
+			// lblProgName
+			// 
+			this.lblProgName.BackColor = System.Drawing.Color.Transparent;
+			this.lblProgName.Font = new System.Drawing.Font("Arial", 12F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.lblProgName.Location = new System.Drawing.Point(8, 8);
+			this.lblProgName.Name = "lblProgName";
+			this.lblProgName.Size = new System.Drawing.Size(360, 19);
+			this.lblProgName.TabIndex = 1;
+			this.lblProgName.Text = "Program Name";
+			this.lblProgName.TextAlign = System.Drawing.ContentAlignment.MiddleCenter;
+			// 
+			// lblVerRelNums
+			// 
+			this.lblVerRelNums.BackColor = System.Drawing.Color.Transparent;
+			this.lblVerRelNums.Font = new System.Drawing.Font("Arial", 10.8F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.lblVerRelNums.Location = new System.Drawing.Point(8, 40);
+			this.lblVerRelNums.Name = "lblVerRelNums";
+			this.lblVerRelNums.Size = new System.Drawing.Size(352, 24);
+			this.lblVerRelNums.TabIndex = 2;
+			this.lblVerRelNums.Text = "Version 0 Release 0";
+			this.lblVerRelNums.TextAlign = System.Drawing.ContentAlignment.MiddleCenter;
+			// 
+			// lblSerialNumber
+			// 
+			this.lblSerialNumber.BackColor = System.Drawing.Color.Transparent;
+			this.lblSerialNumber.Font = new System.Drawing.Font("Arial", 9F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.lblSerialNumber.Location = new System.Drawing.Point(8, 72);
+			this.lblSerialNumber.Name = "lblSerialNumber";
+			this.lblSerialNumber.Size = new System.Drawing.Size(360, 16);
+			this.lblSerialNumber.TabIndex = 3;
+			this.lblSerialNumber.Text = "Serial Number: xx";
+			this.lblSerialNumber.TextAlign = System.Drawing.ContentAlignment.MiddleCenter;
+			// 
+			// CopyrightMessage
+			// 
+			this.CopyrightMessage.BackColor = System.Drawing.Color.Transparent;
+			this.CopyrightMessage.Font = new System.Drawing.Font("Arial", 6F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.CopyrightMessage.Location = new System.Drawing.Point(8, 192);
+			this.CopyrightMessage.Name = "CopyrightMessage";
+			this.CopyrightMessage.Size = new System.Drawing.Size(232, 16);
+			this.CopyrightMessage.TabIndex = 4;
+			this.CopyrightMessage.Text = " Copyright C 1988 - 2008  All Rights Reserved";
+			this.CopyrightMessage.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+			// 
+			// lblUserID
+			// 
+			this.lblUserID.BackColor = System.Drawing.Color.Transparent;
+			this.lblUserID.Font = new System.Drawing.Font("Arial", 7.8F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.lblUserID.Location = new System.Drawing.Point(8, 136);
+			this.lblUserID.Name = "lblUserID";
+			this.lblUserID.Size = new System.Drawing.Size(360, 16);
+			this.lblUserID.TabIndex = 6;
+			this.lblUserID.Text = "User ID: xxxxx";
+			this.lblUserID.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+			// 
+			// pictureBox2
+			// 
+			this.pictureBox2.Enabled = false;
+			this.pictureBox2.Image = ((System.Drawing.Image)(resources.GetObject("pictureBox2.Image")));
+			this.pictureBox2.Location = new System.Drawing.Point(272, 160);
+			this.pictureBox2.Name = "pictureBox2";
+			this.pictureBox2.Size = new System.Drawing.Size(69, 32);
+			this.pictureBox2.TabIndex = 7;
+			this.pictureBox2.TabStop = false;
+			this.pictureBox2.Visible = false;
+			// 
+			// lblSerialNumTitle
+			// 
+			this.lblSerialNumTitle.BackColor = System.Drawing.Color.Transparent;
+			this.lblSerialNumTitle.Font = new System.Drawing.Font("Microsoft Sans Serif", 7.8F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.lblSerialNumTitle.Location = new System.Drawing.Point(112, 96);
+			this.lblSerialNumTitle.Name = "lblSerialNumTitle";
+			this.lblSerialNumTitle.Size = new System.Drawing.Size(256, 32);
+			this.lblSerialNumTitle.TabIndex = 8;
+			this.lblSerialNumTitle.Text = "Serial Number Title";
+			// 
+			// VolianWebLink
+			// 
+			this.VolianWebLink.Location = new System.Drawing.Point(248, 192);
+			this.VolianWebLink.Name = "VolianWebLink";
+			this.VolianWebLink.Size = new System.Drawing.Size(112, 16);
+			this.VolianWebLink.TabIndex = 9;
+			this.VolianWebLink.TabStop = true;
+			this.VolianWebLink.Text = "Volian Enterprises Inc.";
+			this.VolianWebLink.TextAlign = System.Drawing.ContentAlignment.MiddleLeft;
+			this.VolianWebLink.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel1_LinkClicked);
+			// 
+			// lblLicenseTab
+			// 
+			this.lblLicenseTab.BackColor = System.Drawing.Color.Transparent;
+			this.lblLicenseTab.Font = new System.Drawing.Font("Arial", 9F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.lblLicenseTab.Location = new System.Drawing.Point(8, 96);
+			this.lblLicenseTab.Name = "lblLicenseTab";
+			this.lblLicenseTab.Size = new System.Drawing.Size(104, 24);
+			this.lblLicenseTab.TabIndex = 10;
+			this.lblLicenseTab.Text = "Licenced To:";
+			// 
+			// AboutDlg
+			// 
+			this.AutoScaleBaseSize = new System.Drawing.Size(5, 12);
+			this.BackColor = System.Drawing.SystemColors.GrayText;
+			this.BackgroundImage = ((System.Drawing.Image)(resources.GetObject("$this.BackgroundImage")));
+			this.ClientSize = new System.Drawing.Size(370, 209);
+			this.Controls.Add(this.lblLicenseTab);
+			this.Controls.Add(this.VolianWebLink);
+			this.Controls.Add(this.lblSerialNumTitle);
+			this.Controls.Add(this.pictureBox2);
+			this.Controls.Add(this.lblUserID);
+			this.Controls.Add(this.CopyrightMessage);
+			this.Controls.Add(this.lblSerialNumber);
+			this.Controls.Add(this.lblVerRelNums);
+			this.Controls.Add(this.lblProgName);
+			this.Controls.Add(this.btnHlpAbtOK);
+			this.Font = new System.Drawing.Font("Microsoft Sans Serif", 6F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
+			this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.FixedToolWindow;
+			this.Icon = ((System.Drawing.Icon)(resources.GetObject("$this.Icon")));
+			this.MaximizeBox = false;
+			this.MinimizeBox = false;
+			this.Name = "AboutDlg";
+			this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
+			this.Text = "About";
+			this.Load += new System.EventHandler(this.AboutDlg_Load);
+			this.ResumeLayout(false);
+
+		}
+		#endregion
+
+		private void btnHlpAbtOK_Click(object sender, System.EventArgs e)
+		{
+			this.Close();
+		}
+
+		private void linkLabel1_LinkClicked(object sender, System.Windows.Forms.LinkLabelLinkClickedEventArgs e)
+		{
+			System.Diagnostics.Process.Start("www.volian.com");
+		}
+
+		private void AboutDlg_Load(object sender, System.EventArgs e)
+		{
+		
+		}
+
+
+	}
+}

PROMS/ReferencedObjectsOld/LibSource/Utils/AssemblyInfo.cs

@@ -0,0 +1,55 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//

PROMS/ReferencedObjectsOld/LibSource/Utils/AssemblyInfo.cs.bak

@@ -0,0 +1,57 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.1.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyName("")]